Cannot render the rubber band in LPub3D, any help ??


Cannot render the rubber band in LPub3D, any help ??
#1
Hello Everybody,
I am a new user.

I am using LDCad to build my models and LPub3D to generate the building steps. Everything was working fine for me. But when I used the rubber band as sub-model in my model, I got this error while trying to render using LPub3D (Image is empty). It stuck on the rubber band step. The error screen shot is attached and the ldr file. Any help?
Thanks in Advance
   


Attached Files
.ldr   WeDo Explorer.ldr (Size: 112.26 KB / Downloads: 7)
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#2
I don't think you'll get a quicker answer if you post twice. This is just annoying and makes confusing.

JE.
If nothing goes right, go left.
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#3
(2019-02-08, 13:15)Johann Eisner Wrote: I don't think you'll get a quicker answer if you post twice. This is just annoying and makes confusing.
I think El-Ashi just realized that his first post was not placed in the right section of the forum...
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#4
(2019-02-08, 14:10)Philippe Hurbain Wrote:
(2019-02-08, 13:15)Johann Eisner Wrote: I don't think you'll get a quicker answer if you post twice. This is just annoying and makes confusing.
I think El-Ashi just realized that his first post was not placed in the right section of the forum...

Yes, that's exactly what happened . As I am a new member and I didn't get a reply, I thought maybe I am in the wrong section of the forum. 

I did't mean to get a quicker answer by annoying the members. Angel
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#5
Problem is I don't know what could cause this behaviour... Can you share your model file?
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#6
(2019-02-08, 15:06)Philippe Hurbain Wrote: Can you share your model file?

Isn't it the file included in the initial post?
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#7
I removed your post in the wrong section. ;-)
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#8
(2019-02-08, 15:19)Max Martin Richter Wrote:
(2019-02-08, 15:06)Philippe Hurbain Wrote: Can you share your model file?

Isn't it the file included in the initial post?
Oops, thought it was the image!
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#9
(2019-02-08, 15:20)Philippe Hurbain Wrote:
(2019-02-08, 15:19)Max Martin Richter Wrote: Isn't it the file included in the initial post?
Oops, thought it was the image!

Thanks Philippe for your reply ..  yes , a screenshot for the error and the model are included, just let me know if something is missing  Wink
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#10
(2019-02-08, 15:19)Max Martin Richter Wrote:
(2019-02-08, 15:06)Philippe Hurbain Wrote: Can you share your model file?

Isn't it the file included in the initial post?

Yes it's included .. also a screenshot
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#11
Good thing: I loaded your file, created BIs with LPub3D and it worked fine.
Bad thing: dunno what happens on your machine! Could it be that the folder mentionned in the error box of your screenshot can't be written?


Attached Files Thumbnail(s)
   
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#12
Hi
First of all sorry for my bad answer.
Second, i have also no problem to open your file.

JE.
If nothing goes right, go left.
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#13
(2019-02-08, 15:57)Philippe Hurbain Wrote: Good thing: I loaded your file, created BIs with LPub3D and it worked fine.
Bad thing: dunno what happens on your machine! Could it be that the folder mentionned in the error box of your screenshot can't be written?

Thanks Philippe for your help,

Yes .. you did it right. But for me I don't know what is the problem.

Here is what I've tried:

Changing the folder location --> same results (error)
Making different design in a different project file using the rubber band -->  same results (error)
Uninstall everything (Ldraw Lib , LDCad and LPub3D) and install the latest version again -->  same results (error)
Making any project without the rubber band --> working fine and can generate BI

Do you think that there is any addition procedure I should follow with a design that has  sub-model like the rubber band  yo generate the BI without such error?
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#14
(2019-02-08, 16:09)Johann Eisner Wrote: Hi
First of all sorry for my bad answer.
Second, i have also no problem to open your file.

JE.

Thanks Johann for your help,

It's fine

Here is what I've tried:

Changing the folder location --> same results (error)
Making different design in a different project file using the rubber band -->  same results (error)
Uninstall everything (Ldraw Lib , LDCad and LPub3D) and install the latest version again -->  same results (error)
Making any project without the rubber band --> working fine and can generate BI

Do you think that there is any addition procedure I should follow with a design that has  sub-model like the rubber band  yo generate the BI without such error?
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#15
(2019-02-08, 16:34)El-Ashi Wrote:
(2019-02-08, 16:09)Johann Eisner Wrote: Hi
First of all sorry for my bad answer.
Second, i have also no problem to open your file.

JE.

Thanks Johann for your help,

It's fine

Here is what I've tried:

Changing the folder location --> same results (error)
Making different design in a different project file using the rubber band -->  same results (error)
Uninstall everything (Ldraw Lib , LDCad and LPub3D) and install the latest version again -->  same results (error)
Making any project without the rubber band --> working fine and can generate BI

Do you think that there is any addition procedure I should follow with a design that has  sub-model like the rubber band  yo generate the BI without such error?
Hi
I think I solve your problem.
Change in LPub3D under Configuration --> Preferences ---> Rendering  the "Preferend render" to "LDView".
When installing LPub3D, 'Native' is automatically selected there.
With "Native" I have the same problem as you.

Regards JE.
If nothing goes right, go left.
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#16
(2019-02-08, 17:12)Johann Eisner Wrote:
(2019-02-08, 16:34)El-Ashi Wrote: Thanks Johann for your help,

It's fine

Here is what I've tried:

Changing the folder location --> same results (error)
Making different design in a different project file using the rubber band -->  same results (error)
Uninstall everything (Ldraw Lib , LDCad and LPub3D) and install the latest version again -->  same results (error)
Making any project without the rubber band --> working fine and can generate BI

Do you think that there is any addition procedure I should follow with a design that has  sub-model like the rubber band  yo generate the BI without such error?
Hi
I think I solve your problem.
Change in LPub3D under Configuration --> Preferences ---> Rendering  the "Preferend render" to "LDView".
When installing LPub3D, 'Native' is automatically selected there.
With "Native" I have the same problem as you.

Regards JE.
Yes .. It works now  Big Grin Big Grin Big Grin 

Thanks a lot Johann, this solved my problem .. I really appreciate it .  Smile

Have a nice day 

Best regards
Reply
RE: Cannot render the rubber band in LPub3D, any help ??
#17
(2019-02-08, 15:57)Philippe Hurbain Wrote: Good thing: I loaded your file, created BIs with LPub3D and it worked fine.
Bad thing: dunno what happens on your machine! Could it be that the folder mentionned in the error box of your screenshot can't be written?
I have a good news, Philippe .. It works now. Johann gave me a suggestion.. Thanks a lot for your efforts, really appreciated.

Have a nice day  Smile
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 3 Guest(s)