Creator Expert

[Philippe Hurbain]

Creator Expert models

[Philippe Hurbain]

Download MPD (OMR compliant)
Known errors: No stickers.
Done with LDCad 1.6a

[Willy Tschager]

Philo,

I foresee many sleepless nights with you in front of LDPC making all those missing stickers.

w.

[Orion Pobursky]

10272 - Old Trafford - Manchester United
   
OMR Compliant
Missing: Stickers, oh some many stickers (on a side note, I did find a good scan of the sticker sheet of someone wants to try their hand. I have too many other projects)
Notes: There is some minor part overlap in places.

[Orion Pobursky]

10253 - Big Ben
   
OMR Compliant
Missing: Nothing
Note: The Studio editor shows the clock face incorrectly (the pattern doesn't show through the backside part) but the photoreal render shows it correctly.

[Orion Pobursky]

10256 - Taj Mahal
   
OMR Compliant
Missing: 2454 substituted for 2454b

[Orion Pobursky]

10269 - Harley-Davidson Fat Boy

   

OMR Compliant
Missing:
- 35394 (Dish 4 x 4 Inverted with Open Stud), used 3960 instead
- The Harley logo printed 2 x 4 Tiles on the side of the gas tank
- Stickers
Notes:
 - Gears and chain not aligned (to much trouble)
 - Very small overlaps in some places (near the engine but not noticeable unless you really look)
 - The wheel part, 46334 (and probably the tyre too) are a bit too wide. These are unofficial parts so presumably they'll be fixed at some point

[Orion Pobursky]

10214 - Tower Bridge

   

OMR Compliant
Missing: Nothing
Notes: Uses an LDCad flex object for the cables. This does not affect rendering in Studio.

[Philippe Hurbain]

Notes: Uses an LDCad flex object for the cables. This does not affect rendering in Studio.

Interesting usage... how did you adjust end point, trial and error?

[Orion Pobursky]

Interesting usage... how did you adjust end point, trial and error?

 Pretty much. I could have figured out the precise angles but didn't want to spend half the afternoon doing trig and geometry.

[Magnus Forsberg]

35394 is now made and uploaded to the PT.

[Orion Pobursky]

35394 is now made and uploaded to the PT.

Thanks Magnus. I was going to do this myself but you beat me to it.

[Willy Tschager]

10214 - Tower Bridge

Stunning!

w.

[Max Martin Richter]

Download MPD (OMR compliant)
Known errors: No stickers.
Done with LDCad 1.6a

You forgot to rotate the mirror arms. ;-)

This was one of the sets I bought in Billund last years. But it is still sealed and I'm unsure if I will open it to get the stickers out or not. :-)

[Orion Pobursky]

10226 - Sopwith Camel

   

OMR Compliant
Missing: Stickers
Notes: The rigging isn't perfect but it's good enough and I could spend a week tweaking and still not get it where I want it.

[Orion Pobursky]

10267 - Gingerbread House

       

OMR Compliant
Missing:
 - Stickers
 - Gingerbread man/woman head, torso
 - Gingerbread woman dress (unpatterned is on digitalbricks, 24782)
 - Gingerbread baby printed 1x2 tile
 - Minifig baby bottle (18855)

Notes:
 - There are place holder files for the gingerbread man and woman with just the leg assemblies
 - I am aware of the color error on the candy cane in the render. It is fixed in the file.

[Orion Pobursky]

10241 - Maersk Line Triple-E

   


OMR Comlpiant

Missing: Stickers

Notes: None

[Orion Pobursky]

Sneak preview:

   

This set is what started my Creator Expert streak. The angles in this set were making my brain hurt so I took a break for a while. I'm back to finish up

[N. W. Perry]

Sneak preview:



This set is what started my Creator Expert streak. The angles in this set were making my brain hurt so I took a break for a while. I'm back to finish up

Boy, you're not kidding. I had the darnedest time even figuring out the angles in the Architecture version.

[Orion Pobursky]

Boy, you're not kidding. I had the darnedest time even figuring out the angles in the Architecture version.

Don't get me wrong, the angles won't be exact. I don't have the patience to figure that out.

[Orion Pobursky]

10262 - James Bond Astin Martin DB5


   

OMR Compliant

Missing:

 - Stickers

 - 93058b (Weapon Throwing Star / Shuriken with Textured Grips), used 93058 instead

Notes: No serious attempt was made to make the gadgets easily positionable. It shouldn't be too difficult for those who are determined to do so.

[Orion Pobursky]

Updated

[Marc Giraudet]

10233 - Horizon Express

The french TGV.

   


  10233 - Horizon Express.mpd (Size: 98.08 KB / Downloads: 24)

File OMR compliant.
Know issues : Missing stickers and some Minifig patterned parts (4 heads, 1 torso).

[Ulrich Röder]

10277 - Crocodile Locomotive

Swiss Ce 6/8 III



   

   



  10277 - Crocodile Locomotive.mpd (Size: 319 KB / Downloads: 30)

OMR compliant : Yes

Missing Parts :  2 Minifigures

[Ulrich Röder]

10265 - Ford Mustang

American Classic Car Ford Mustang from 1967

   


  10265 - Ford Mustang 1967.mpd (Size: 812.6 KB / Downloads: 43)

OMR compliant: Yes

Missing Parts: Nothing

B-Model included: No

[Guillaume]

10269 - Harley-Davidson Fat Boy



OMR Compliant
Missing:
- 35394 (Dish 4 x 4 Inverted with Open Stud), used 3960 instead
- The Harley logo printed 2 x 4 Tiles on the side of the gas tank
- Stickers
Notes:
 - Gears and chain not aligned (to much trouble)
 - Very small overlaps in some places (near the engine but not noticeable unless you really look)
 - The wheel part, 46334 (and probably the tyre too) are a bit too wide. These are unofficial parts so presumably they'll be fixed at some point

Hi,

since one should at least post once to be considered real, I post to say hello, and thank you for preparing this model. I was looking in the  OMR but did not find it there, so looked in the forum.

I made a modification of the fatboy to look like a Yamaha Dragstar 1100 which my father owns in real, even with the same dark redish color, because it is very very close to the fatboy. It still took me quite some time as it was my first ever LEGO that had to "look" close to something real, and around 60 additional parts I had to buy to complete the design that looked the closest to me.

Now I thought, why not modify the existing LDraw model as well, and share it, before the real LEGO model lands on the shelve of my father in 10 days  (birthday present !)

Because the modification will be done starting from your LDraw model, is it allowed to reshared it on the forum somewhere, of course giving you credit, or should I wait for it to appear officially on OMR first ?

thanks
Guillaume

[Orion Pobursky]

Share away. It's licensed under the Creative Commons Attribution License so you just have to maintain author credit. Otherwise any and all changes are fine.

[Guillaume]

Share away. It's licensed under the Creative Commons Attribution License so you just have to maintain author credit. Otherwise any and all changes are fine.

Cool, very practical, thanks for using this license.

[Orion Pobursky]

Now that the instructions are available online, stay tuned...

[Philippe Hurbain]

Now that the instructions are available online, stay tuned...

Good luck with this behemoth 

[Orion Pobursky]

10276 - Colosseum
   
OMR Compliant
Missing: Nothing
Note: Not as crazy angle-wise as Old Trafford or a large Technic car but doing this without LDCad would have been pure insanity.

[Philippe Hurbain]

10276 - Colosseum

OMR Compliant
Missing: Nothing
Note: Not as crazy angle-wise as Old Trafford or a large Technic car but doing this without LDCad would have been pure insanity.

Wow, that was damn fast! But subpart 10276 - bk4-step561-583.ldr is not correctly placed, it slip on side...

[Willy Tschager]

10276 - Colosseum

w.

[Orion Pobursky]

Wow, that was damn fast! But subpart 10276 - bk4-step561-583.ldr is not correctly placed, it slip on side...

Fixed (I didn't redo the preview image).

This model went fast (lots of symmetry) until I hit the tall sides. All of those sides are similar but not the same. LDCad's ability to view and edit each step came in very handy.

[Orion Pobursky]

10280 - Flower Bouquet

   

OMR Complaint
Missing: Nothing
Notes: This mpd uses an unofficial part with a TEXMAP (98088p04). LDCad doesn't, yet, support the embedding of TEXMAPs in the mpd.

[Orion Pobursky]

10281 - Bonsai

   

OMR Compliant
Missing: Nothing
Notes: I did my best with the 1x1 round tiles that just lie loosely around the tree base. There are definitely overlaps.

[Orion Pobursky]

Here's the Cherry Blossom variant

   

[N. W. Perry]

Notes: I did my best with the 1x1 round tiles that just lie loosely around the tree base. There are definitely overlaps.

AAAH—that sort of thing is the bane of my existence! You are brave to have attempted it. 

This reminds me of a feature I wish existed somewhere; I'd call it "gravity". It would let you virtually "drop" loose pieces onto a surface or into a container, and they would lie naturally. (I guess this would require at least collision info, along with some way of modeling the mass and center of gravity of a part?)

[Philippe Hurbain]

AAAH—that sort of thing is the bane of my existence! You are brave to have attempted it. 

This reminds me of a feature I wish existed somewhere; I'd call it "gravity". It would let you virtually "drop" loose pieces onto a surface or into a container, and they would lie naturally. (I guess this would require at least collision info, along with some way of modeling the mass and center of gravity of a part?)

...and friction between parts...
Impressive (and beautiful) work Orion!

[N. W. Perry]

...and friction between parts...
Impressive (and beautiful) work Orion!

Yes, friction…if you wanted to actually model how pieces fall into a pile. Although I'd be happy enough to be able to drag a part straight down until it collides with another part, then use that contact point as a pivot point to rotate the part into a position of rest.

And I concur—beautiful model!

[Gerald Lasser]

Here's the Cherry Blossom variant

Beautiful! One of the black pot's legs it too short

[Orion Pobursky]

Beautiful! One of the black pot's legs it too short

Fixed and updated on both models.

[Ulrich Röder]

10295 - Porsche 911 / 930

   

   

   

   


OMR Compliance : Yes, but unofficial parts not implemented.

Missing : Nothing



  10295 - Porsche 911 Targa.mpd (Size: 66.02 KB / Downloads: 44)


  10295 - Porsche 930 Turbo.mpd (Size: 77.55 KB / Downloads: 55)

[Orion Pobursky]

Sneak peek. The set will be arriving on Friday so I can model the patterns, solar panels, and stickers. The windshield will be trickier and I'll prolly need help from more seasoned authors.

   

[Gerald Lasser]

Sneak peek. The set will be arriving on Friday so I can model the patterns, solar panels, and stickers. The windshield will be trickier and I'll prolly need help from more seasoned authors.

I did not find a picture of the bottom of the windshield so far, that would be good.
Also the panels of the cargo bay need to be done!

[Eef Vreeland]

10280 - Flower Bouquet



OMR Complaint
Missing: Nothing
Notes: This mpd uses an unofficial part with a TEXMAP (98088p04). LDCad doesn't, yet, support the embedding of TEXMAPs in the mpd.

I find this so beautiful, it looks soooo real. Artistic use of Lego to express nature, well done 

[Orion Pobursky]

I did not find a picture of the bottom of the windshield so far, that would be good.
Also the panels of the cargo bay need to be done!

Photos of the windscreen are attached to this post

[Gerald Lasser]

Photos of the windscreen are attached to this post

Thanks!

I uploaded the part, let me know if the fit is ok! The I will do the pattern

[Marc Giraudet]

10265 - Ford Mustang

B-Model included: No

10265 - Ford Mustang B Model

   


  10265 - Ford Mustang 1967 B Model.mpd (Size: 817.63 KB / Downloads: 31)

B Model based on the Ulrich model (thanks), with some improvement (inventories, official and unofficial parts, color mismatch)

File OMR compliant.

[Orion Pobursky]

Sneak peek. The set will be arriving on Friday so I can model the patterns, solar panels, and stickers. The windshield will be trickier and I'll prolly need help from more seasoned authors.

Stickers are done. 5 patterns, 2 formed stickers, and one sticker shortcut left. Plus I'm about 75% done with the model itself.