Creator Expert models
Creator Expert
10269 - Harley-Davidson Fat Boy
2020-04-07, 2:06 (This post was last modified: 2020-04-08, 16:44 by Orion Pobursky.)
2020-04-07, 2:06 (This post was last modified: 2020-04-08, 16:44 by Orion Pobursky.)
10269 - Harley-Davidson Fat Boy
OMR Compliant
Missing:
- 35394 (Dish 4 x 4 Inverted with Open Stud), used 3960 instead
- The Harley logo printed 2 x 4 Tiles on the side of the gas tank
- Stickers
Notes:
- Gears and chain not aligned (to much trouble)
- Very small overlaps in some places (near the engine but not noticeable unless you really look)
- The wheel part, 46334 (and probably the tyre too) are a bit too wide. These are unofficial parts so presumably they'll be fixed at some point
OMR Compliant
Missing:
- 35394 (Dish 4 x 4 Inverted with Open Stud), used 3960 instead
- The Harley logo printed 2 x 4 Tiles on the side of the gas tank
- Stickers
Notes:
- Gears and chain not aligned (to much trouble)
- Very small overlaps in some places (near the engine but not noticeable unless you really look)
- The wheel part, 46334 (and probably the tyre too) are a bit too wide. These are unofficial parts so presumably they'll be fixed at some point
RE: 10269 - Harley-Davidson Fat Boy
2020-04-08, 15:13 (This post was last modified: 2020-04-08, 15:14 by Magnus Forsberg.)
2020-04-08, 15:13 (This post was last modified: 2020-04-08, 15:14 by Magnus Forsberg.)
35394 is now made and uploaded to the PT.
(2020-04-08, 15:13)Magnus Forsberg Wrote: 35394 is now made and uploaded to the PT.
Thanks Magnus. I was going to do this myself but you beat me to it.
(2018-02-10, 17:16)Philippe Hurbain Wrote:
Download MPD (OMR compliant)
Known errors: No stickers.
Done with LDCad 1.6a
You forgot to rotate the mirror arms. ;-)
This was one of the sets I bought in Billund last years. But it is still sealed and I'm unsure if I will open it to get the stickers out or not. :-)
10267 - Gingerbread House
OMR Compliant
Missing:
- Stickers
- Gingerbread man/woman head, torso
- Gingerbread woman dress (unpatterned is on digitalbricks, 24782)
- Gingerbread baby printed 1x2 tile
- Minifig baby bottle (18855)
Notes:
- There are place holder files for the gingerbread man and woman with just the leg assemblies
- I am aware of the color error on the candy cane in the render. It is fixed in the file.
OMR Compliant
Missing:
- Stickers
- Gingerbread man/woman head, torso
- Gingerbread woman dress (unpatterned is on digitalbricks, 24782)
- Gingerbread baby printed 1x2 tile
- Minifig baby bottle (18855)
Notes:
- There are place holder files for the gingerbread man and woman with just the leg assemblies
- I am aware of the color error on the candy cane in the render. It is fixed in the file.
10241 - Maersk Line Triple-E
2020-04-10, 23:11 (This post was last modified: 2020-04-10, 23:12 by Orion Pobursky.)
2020-04-10, 23:11 (This post was last modified: 2020-04-10, 23:12 by Orion Pobursky.)
(2020-04-10, 23:51)Orion Pobursky Wrote: Sneak preview:
This set is what started my Creator Expert streak. The angles in this set were making my brain hurt so I took a break for a while. I'm back to finish up
Boy, you're not kidding. I had the darnedest time even figuring out the angles in the Architecture version.
10262 - James Bond Astin Martin DB5
2020-04-13, 17:10 (This post was last modified: 2020-04-14, 2:26 by Orion Pobursky.)
2020-04-13, 17:10 (This post was last modified: 2020-04-14, 2:26 by Orion Pobursky.)
10262 - James Bond Astin Martin DB5
OMR Compliant
Missing:
- Stickers
- 93058b (Weapon Throwing Star / Shuriken with Textured Grips), used 93058 instead
Notes: No serious attempt was made to make the gadgets easily positionable. It shouldn't be too difficult for those who are determined to do so.
OMR Compliant
Missing:
- Stickers
- 93058b (Weapon Throwing Star / Shuriken with Textured Grips), used 93058 instead
Notes: No serious attempt was made to make the gadgets easily positionable. It shouldn't be too difficult for those who are determined to do so.
RE: Creator Expert - 10233 - Horizon Express
2020-05-24, 12:25 (This post was last modified: 2020-05-24, 12:25 by Marc Giraudet.)
2020-05-24, 12:25 (This post was last modified: 2020-05-24, 12:25 by Marc Giraudet.)
10233 - Horizon Express
The french TGV.
10233 - Horizon Express.mpd (Size: 98.08 KB / Downloads: 23)
File OMR compliant.
Know issues : Missing stickers and some Minifig patterned parts (4 heads, 1 torso).
The french TGV.
![LDraw File .mpd](https://forums.ldraw.org/images/attachtypes/blank.png)
File OMR compliant.
Know issues : Missing stickers and some Minifig patterned parts (4 heads, 1 torso).
10277 - Crocodile Locomotive
Swiss Ce 6/8 III
10277 - Crocodile Locomotive.mpd (Size: 319 KB / Downloads: 29)
OMR compliant : Yes
Missing Parts : 2 Minifigures
Swiss Ce 6/8 III
![LDraw File .mpd](https://forums.ldraw.org/images/attachtypes/blank.png)
OMR compliant : Yes
Missing Parts : 2 Minifigures
10265 - Ford Mustang
American Classic Car Ford Mustang from 1967
10265 - Ford Mustang 1967.mpd (Size: 812.6 KB / Downloads: 41)
OMR compliant: Yes
Missing Parts: Nothing
B-Model included: No
American Classic Car Ford Mustang from 1967
![LDraw File .mpd](https://forums.ldraw.org/images/attachtypes/blank.png)
OMR compliant: Yes
Missing Parts: Nothing
B-Model included: No
(2020-04-07, 2:06)Orion Pobursky Wrote: 10269 - Harley-Davidson Fat Boy
OMR Compliant
Missing:
- 35394 (Dish 4 x 4 Inverted with Open Stud), used 3960 instead
- The Harley logo printed 2 x 4 Tiles on the side of the gas tank
- Stickers
Notes:
- Gears and chain not aligned (to much trouble)
- Very small overlaps in some places (near the engine but not noticeable unless you really look)
- The wheel part, 46334 (and probably the tyre too) are a bit too wide. These are unofficial parts so presumably they'll be fixed at some point
Hi,
since one should at least post once to be considered real, I post to say hello, and thank you for preparing this model. I was looking in the OMR but did not find it there, so looked in the forum.
I made a modification of the fatboy to look like a Yamaha Dragstar 1100 which my father owns in real, even with the same dark redish color, because it is very very close to the fatboy. It still took me quite some time as it was my first ever LEGO that had to "look" close to something real, and around 60 additional parts I had to buy to complete the design that looked the closest to me.
Now I thought, why not modify the existing LDraw model as well, and share it, before the real LEGO model lands on the shelve of my father in 10 days (birthday present !)
Because the modification will be done starting from your LDraw model, is it allowed to reshared it on the forum somewhere, of course giving you credit, or should I wait for it to appear officially on OMR first ?
thanks
Guillaume
RE: 10269 - Harley-Davidson Fat Boy
2020-08-22, 19:58 (This post was last modified: 2020-08-22, 19:59 by Orion Pobursky.)
2020-08-22, 19:58 (This post was last modified: 2020-08-22, 19:59 by Orion Pobursky.)
Share away. It's licensed under the Creative Commons Attribution License so you just have to maintain author credit. Otherwise any and all changes are fine.
RE: 10276 - Colosseum
2020-11-30, 1:05 (This post was last modified: 2020-11-30, 14:11 by Orion Pobursky.)
2020-11-30, 1:05 (This post was last modified: 2020-11-30, 14:11 by Orion Pobursky.)
10276 - Colosseum
OMR Compliant
Missing: Nothing
Note: Not as crazy angle-wise as Old Trafford or a large Technic car but doing this without LDCad would have been pure insanity.
OMR Compliant
Missing: Nothing
Note: Not as crazy angle-wise as Old Trafford or a large Technic car but doing this without LDCad would have been pure insanity.
(2020-11-30, 1:05)Orion Pobursky Wrote: 10276 - ColosseumWow, that was damn fast! But subpart 10276 - bk4-step561-583.ldr is not correctly placed, it slip on side...
OMR Compliant
Missing: Nothing
Note: Not as crazy angle-wise as Old Trafford or a large Technic car but doing this without LDCad would have been pure insanity.
(2020-11-30, 8:20)Philippe Hurbain Wrote: Wow, that was damn fast! But subpart 10276 - bk4-step561-583.ldr is not correctly placed, it slip on side...
Fixed (I didn't redo the preview image).
This model went fast (lots of symmetry) until I hit the tall sides. All of those sides are similar but not the same. LDCad's ability to view and edit each step came in very handy.
10281 - Bonsai
2021-01-07, 23:35 (This post was last modified: 2021-01-11, 23:00 by Orion Pobursky.)
2021-01-07, 23:35 (This post was last modified: 2021-01-11, 23:00 by Orion Pobursky.)
10281 - Bonsai
OMR Compliant
Missing: Nothing
Notes: I did my best with the 1x1 round tiles that just lie loosely around the tree base. There are definitely overlaps.
OMR Compliant
Missing: Nothing
Notes: I did my best with the 1x1 round tiles that just lie loosely around the tree base. There are definitely overlaps.
10281 - Bonsai - Cherry Blossoms
2021-01-07, 23:36 (This post was last modified: 2021-01-11, 23:00 by Orion Pobursky.)
2021-01-07, 23:36 (This post was last modified: 2021-01-11, 23:00 by Orion Pobursky.)
(2021-01-07, 23:35)Orion Pobursky Wrote: Notes: I did my best with the 1x1 round tiles that just lie loosely around the tree base. There are definitely overlaps.
AAAH—that sort of thing is the bane of my existence! You are brave to have attempted it.
![Cool Cool](https://forums.ldraw.org/images/smilies/cool.png)
This reminds me of a feature I wish existed somewhere; I'd call it "gravity". It would let you virtually "drop" loose pieces onto a surface or into a container, and they would lie naturally. (I guess this would require at least collision info, along with some way of modeling the mass and center of gravity of a part?)
(2021-01-07, 23:43)N. W. Perry Wrote: AAAH—that sort of thing is the bane of my existence! You are brave to have attempted it....and friction between parts...
This reminds me of a feature I wish existed somewhere; I'd call it "gravity". It would let you virtually "drop" loose pieces onto a surface or into a container, and they would lie naturally. (I guess this would require at least collision info, along with some way of modeling the mass and center of gravity of a part?)
Impressive (and beautiful) work Orion!
(2021-01-08, 8:22)Philippe Hurbain Wrote: ...and friction between parts...
Impressive (and beautiful) work Orion!
Yes, friction…if you wanted to actually model how pieces fall into a pile. Although I'd be happy enough to be able to drag a part straight down until it collides with another part, then use that contact point as a pivot point to rotate the part into a position of rest.
And I concur—beautiful model!
10295 - Porsche 911 / 930
OMR Compliance : Yes, but unofficial parts not implemented.
Missing : Nothing
10295 - Porsche 911 Targa.mpd (Size: 66.02 KB / Downloads: 42)
10295 - Porsche 930 Turbo.mpd (Size: 77.55 KB / Downloads: 53)
OMR Compliance : Yes, but unofficial parts not implemented.
Missing : Nothing
![LDraw File .mpd](https://forums.ldraw.org/images/attachtypes/blank.png)
![LDraw File .mpd](https://forums.ldraw.org/images/attachtypes/blank.png)
(2021-04-06, 4:01)Orion Pobursky Wrote: Sneak peek. The set will be arriving on Friday so I can model the patterns, solar panels, and stickers. The windshield will be trickier and I'll prolly need help from more seasoned authors.
I did not find a picture of the bottom of the windshield so far, that would be good.
Also the panels of the cargo bay need to be done!
(2021-01-07, 20:42)Orion Pobursky Wrote: 10280 - Flower Bouquet
OMR Complaint
Missing: Nothing
Notes: This mpd uses an unofficial part with a TEXMAP (98088p04). LDCad doesn't, yet, support the embedding of TEXMAPs in the mpd.
I find this so beautiful, it looks soooo real. Artistic use of Lego to express nature, well done
![Heart Heart](https://forums.ldraw.org/images/smilies/heart.png)
(2020-07-19, 18:15)Ulrich Röder Wrote: 10265 - Ford Mustang
B-Model included: No
10265 - Ford Mustang B Model
![LDraw File .mpd](https://forums.ldraw.org/images/attachtypes/blank.png)
B Model based on the Ulrich model (thanks), with some improvement (inventories, official and unofficial parts, color mismatch)
File OMR compliant.
(2021-04-06, 4:01)Orion Pobursky Wrote: Sneak peek. The set will be arriving on Friday so I can model the patterns, solar panels, and stickers. The windshield will be trickier and I'll prolly need help from more seasoned authors.
Stickers are done. 5 patterns, 2 formed stickers, and one sticker shortcut left. Plus I'm about 75% done with the model itself.
« Next Oldest | Next Newest »
Users browsing this thread: 2 Guest(s)