Creator Expert


Creator Expert
#1
Creator Expert models
Reply
10258 - London Bus
#2
[Image: 10258.png]
Download MPD (OMR compliant)
Known errors: No stickers.
Done with LDCad 1.6a
Reply
RE: 10258 - London Bus
#3
Philo,

I foresee many sleepless nights with you in front of LDPC making all those missing stickers.

w.
LEGO ergo sum
Reply
RE: 10258 - London Bus
#14
(2018-02-10, 17:16)Philippe Hurbain Wrote: [Image: 10258.png]
Download MPD (OMR compliant)
Known errors: No stickers.
Done with LDCad 1.6a

You forgot to rotate the mirror arms. ;-)

This was one of the sets I bought in Billund last years. But it is still sealed and I'm unsure if I will open it to get the stickers out or not. :-)
Reply
10272 - Old Trafford - Manchester United
#4
10272 - Old Trafford - Manchester United
   
OMR Compliant
Missing: Stickers, oh some many stickers (on a side note, I did find a good scan of the sticker sheet of someone wants to try their hand. I have too many other projects)
Notes: There is some minor part overlap in places.


Attached Files
.mpd   10272 - Old Trafford - Manchester United.mpd (Size: 299.76 KB / Downloads: 14)
Reply
10253 - Big Ben
#5
10253 - Big Ben
   
OMR Compliant
Missing: Nothing
Note: The Studio editor shows the clock face incorrectly (the pattern doesn't show through the backside part) but the photoreal render shows it correctly.


Attached Files
.mpd   10253 - Big Ben.mpd (Size: 266.68 KB / Downloads: 13)
Reply
10256 - Taj Mahal
#6
10256 - Taj Mahal
   
OMR Compliant
Missing: 2454 substituted for 2454b


Attached Files
.mpd   10256 - Taj Mahal.mpd (Size: 121.12 KB / Downloads: 13)
Reply
10269 - Harley-Davidson Fat Boy
#7
10269 - Harley-Davidson Fat Boy

   

OMR Compliant
Missing:
- 35394 (Dish 4 x 4 Inverted with Open Stud), used 3960 instead
- The Harley logo printed 2 x 4 Tiles on the side of the gas tank
- Stickers
Notes:
 - Gears and chain not aligned (to much trouble)
 - Very small overlaps in some places (near the engine but not noticeable unless you really look)
 - The wheel part, 46334 (and probably the tyre too) are a bit too wide. These are unofficial parts so presumably they'll be fixed at some point


Attached Files
.mpd   10269 - Harley-Davidson Fat Boy.mpd (Size: 157.71 KB / Downloads: 13)
Reply
RE: 10269 - Harley-Davidson Fat Boy
#11
35394 is now made and uploaded to the PT.
Reply
RE: 10269 - Harley-Davidson Fat Boy
#12
(2020-04-08, 15:13)Magnus Forsberg Wrote: 35394 is now made and uploaded to the PT.

Thanks Magnus. I was going to do this myself but you beat me to it.
Reply
RE: 10269 - Harley-Davidson Fat Boy
#26
(2020-04-07, 2:06)Orion Pobursky Wrote: 10269 - Harley-Davidson Fat Boy



OMR Compliant
Missing:
- 35394 (Dish 4 x 4 Inverted with Open Stud), used 3960 instead
- The Harley logo printed 2 x 4 Tiles on the side of the gas tank
- Stickers
Notes:
 - Gears and chain not aligned (to much trouble)
 - Very small overlaps in some places (near the engine but not noticeable unless you really look)
 - The wheel part, 46334 (and probably the tyre too) are a bit too wide. These are unofficial parts so presumably they'll be fixed at some point

Hi,

since one should at least post once to be considered real, I post to say hello, and thank you for preparing this model. I was looking in the  OMR but did not find it there, so looked in the forum.

I made a modification of the fatboy to look like a Yamaha Dragstar 1100 which my father owns in real, even with the same dark redish color, because it is very very close to the fatboy. It still took me quite some time as it was my first ever LEGO that had to "look" close to something real, and around 60 additional parts I had to buy to complete the design that looked the closest to me.

Now I thought, why not modify the existing LDraw model as well, and share it, before the real LEGO model lands on the shelve of my father in 10 days  (birthday present !)

Because the modification will be done starting from your LDraw model, is it allowed to reshared it on the forum somewhere, of course giving you credit, or should I wait for it to appear officially on OMR first ?

thanks
Guillaume
Reply
RE: 10269 - Harley-Davidson Fat Boy
#27
Share away. It's licensed under the Creative Commons Attribution License so you just have to maintain author credit. Otherwise any and all changes are fine.
Reply
RE: 10269 - Harley-Davidson Fat Boy
#28
(2020-08-22, 19:58)Orion Pobursky Wrote: Share away. It's licensed under the Creative Commons Attribution License so you just have to maintain author credit. Otherwise any and all changes are fine.

Cool, very practical, thanks for using this license.
Reply
10214 - Tower Bridge
#8
10214 - Tower Bridge

   

OMR Compliant
Missing: Nothing
Notes: Uses an LDCad flex object for the cables. This does not affect rendering in Studio.


Attached Files
.mpd   10214 - Tower Bridge.mpd (Size: 94.21 KB / Downloads: 12)
Reply
RE: 10214 - Tower Bridge
#9
(2020-04-07, 23:19)Orion Pobursky Wrote: Notes: Uses an LDCad flex object for the cables. This does not affect rendering in Studio.
Interesting usage... how did you adjust end point, trial and error?
Reply
RE: 10214 - Tower Bridge
#10
(2020-04-08, 6:13)Philippe Hurbain Wrote: Interesting usage... how did you adjust end point, trial and error?
 Pretty much. I could have figured out the precise angles but didn't want to spend half the afternoon doing trig and geometry.
Reply
RE: 10214 - Tower Bridge
#13
(2020-04-07, 23:19)Orion Pobursky Wrote: 10214 - Tower Bridge

Stunning!

w.
LEGO ergo sum
Reply
10226 - Sopwith Camel
#15
10226 - Sopwith Camel

   

OMR Compliant
Missing: Stickers
Notes: The rigging isn't perfect but it's good enough and I could spend a week tweaking and still not get it where I want it.


Attached Files
.mpd   10226 - Sopwith Camel.mpd (Size: 1.09 MB / Downloads: 8)
Reply
10267 - Gingerbread House
#16
10267 - Gingerbread House

       

OMR Compliant
Missing:
 - Stickers
 - Gingerbread man/woman head, torso
 - Gingerbread woman dress (unpatterned is on digitalbricks, 24782)
 - Gingerbread baby printed 1x2 tile
 - Minifig baby bottle (18855)

Notes:
 - There are place holder files for the gingerbread man and woman with just the leg assemblies
 - I am aware of the color error on the candy cane in the render. It is fixed in the file.


Attached Files
.mpd   10267 - Gingerbread House.mpd (Size: 115.07 KB / Downloads: 15)
Reply
10241 - Maersk Line Triple-E
#17
10241 - Maersk Line Triple-E

   


OMR Comlpiant

Missing: Stickers

Notes: None


Attached Files
.mpd   10241 - Maersk Line Triple-E.mpd (Size: 130.39 KB / Downloads: 7)
Reply
10234 - Sydney Opera House
#18
Sneak preview:

   

This set is what started my Creator Expert streak. The angles in this set were making my brain hurt so I took a break for a while. I'm back to finish up
Reply
RE: 10234 - Sydney Opera House
#19
(2020-04-10, 23:51)Orion Pobursky Wrote: Sneak preview:



This set is what started my Creator Expert streak. The angles in this set were making my brain hurt so I took a break for a while. I'm back to finish up

Boy, you're not kidding. I had the darnedest time even figuring out the angles in the Architecture version.
Reply
RE: 10234 - Sydney Opera House
#20
(2020-04-11, 0:06)N. W. Perry Wrote: Boy, you're not kidding. I had the darnedest time even figuring out the angles in the Architecture version.

Don't get me wrong, the angles won't be exact. I don't have the patience to figure that out.
Reply
10262 - James Bond Astin Martin DB5
#21
10262 - James Bond Astin Martin DB5


   

OMR Compliant

Missing:

 - Stickers

 - 93058b (Weapon Throwing Star / Shuriken with Textured Grips), used 93058 instead

Notes: No serious attempt was made to make the gadgets easily positionable. It shouldn't be too difficult for those who are determined to do so.


Attached Files
.mpd   10262 - James Bond Astin Martin DB5.mpd (Size: 2.21 MB / Downloads: 20)
Reply
RE: 10262 - James Bond Astin Martin DB5
#22
Updated
Reply
RE: Creator Expert - 10233 - Horizon Express
#23
10233 - Horizon Express

The french TGV.

   


.mpd   10233 - Horizon Express.mpd (Size: 98.08 KB / Downloads: 11)

File OMR compliant.
Know issues : Missing stickers and some Minifig patterned parts (4 heads, 1 torso).
Reply
RE: Creator Expert - 10277 - Crocodile Locomotive
#24
Photo 
10277 - Crocodile Locomotive

Swiss Ce 6/8 III



   

   



.mpd   10277 - Crocodile Locomotive.mpd (Size: 319 KB / Downloads: 14)

OMR compliant : Yes

Missing Parts :  2 Minifigures
Reply
RE: Creator Expert - 10265 - Ford Mustang 1967
#25
10265 - Ford Mustang

American Classic Car Ford Mustang from 1967

   


.mpd   10265 - Ford Mustang 1967.mpd (Size: 812.6 KB / Downloads: 19)

OMR compliant: Yes

Missing Parts: Nothing

B-Model included: No
Reply
RE: Creator Expert - 10265 - Ford Mustang 1967
#49
(2020-07-19, 18:15)Ulrich Röder Wrote: 10265 - Ford Mustang

B-Model included: No

10265 - Ford Mustang B Model

   


.mpd   10265 - Ford Mustang 1967 B Model.mpd (Size: 817.63 KB / Downloads: 9)

B Model based on the Ulrich model (thanks), with some improvement (inventories, official and unofficial parts, color mismatch)

File OMR compliant.
If you don't understand my english, that's normal, me too !
Reply
10276 - Colosseum
#29
Now that the instructions are available online, stay tuned...
Reply
RE: 10276 - Colosseum
#30
(2020-11-27, 15:24)Orion Pobursky Wrote: Now that the instructions are available online, stay tuned...
Good luck with this behemoth  Big Grin
Reply
RE: 10276 - Colosseum
#31
10276 - Colosseum
   
OMR Compliant
Missing: Nothing
Note: Not as crazy angle-wise as Old Trafford or a large Technic car but doing this without LDCad would have been pure insanity.


Attached Files
.mpd   10276 - Colosseum.mpd (Size: 355.04 KB / Downloads: 24)
Reply
RE: 10276 - Colosseum
#32
(2020-11-30, 1:05)Orion Pobursky Wrote: 10276 - Colosseum

OMR Compliant
Missing: Nothing
Note: Not as crazy angle-wise as Old Trafford or a large Technic car but doing this without LDCad would have been pure insanity.
Wow, that was damn fast! But subpart 10276 - bk4-step561-583.ldr is not correctly placed, it slip on side...
Reply
RE: 10276 - Colosseum
#34
(2020-11-30, 8:20)Philippe Hurbain Wrote: Wow, that was damn fast! But subpart 10276 - bk4-step561-583.ldr is not correctly placed, it slip on side...

Fixed (I didn't redo the preview image).

This model went fast (lots of symmetry) until I hit the tall sides. All of those sides are similar but not the same. LDCad's ability to view and edit each step came in very handy.
Reply
RE: 10276 - Colosseum
#33
(2020-11-30, 1:05)Orion Pobursky Wrote: 10276 - Colosseum
Heart
w.
LEGO ergo sum
Reply
10280 - Flower Bouquet
#35
10280 - Flower Bouquet

   

OMR Complaint
Missing: Nothing
Notes: This mpd uses an unofficial part with a TEXMAP (98088p04). LDCad doesn't, yet, support the embedding of TEXMAPs in the mpd.


Attached Files
.mpd   10280 - Flower Bouquet.mpd (Size: 235.31 KB / Downloads: 10)
Reply
RE: 10280 - Flower Bouquet
#46
(2021-01-07, 20:42)Orion Pobursky Wrote: 10280 - Flower Bouquet



OMR Complaint
Missing: Nothing
Notes: This mpd uses an unofficial part with a TEXMAP (98088p04). LDCad doesn't, yet, support the embedding of TEXMAPs in the mpd.

I find this so beautiful, it looks soooo real. Artistic use of Lego to express nature, well done  Heart
Reply
10281 - Bonsai
#36
10281 - Bonsai

   

OMR Compliant
Missing: Nothing
Notes: I did my best with the 1x1 round tiles that just lie loosely around the tree base. There are definitely overlaps.


Attached Files
.mpd   10281 - Bonsai.mpd (Size: 950.67 KB / Downloads: 15)
Reply
10281 - Bonsai - Cherry Blossoms
#37
Here's the Cherry Blossom variant

   


Attached Files
.mpd   10281 - Bonsai - Cherry Blossoms.mpd (Size: 956.41 KB / Downloads: 19)
Reply
RE: 10281 - Bonsai - Cherry Blossoms
#41
(2021-01-07, 23:36)Orion Pobursky Wrote: Here's the Cherry Blossom variant

Beautiful! One of the black pot's legs it too short
Reply
RE: 10281 - Bonsai - Cherry Blossoms
#42
(2021-01-09, 20:05)Gerald Lasser Wrote: Beautiful! One of the black pot's legs it too short

Fixed and updated on both models.
Reply
RE: 10281 - Bonsai
#38
(2021-01-07, 23:35)Orion Pobursky Wrote: Notes: I did my best with the 1x1 round tiles that just lie loosely around the tree base. There are definitely overlaps.

AAAH—that sort of thing is the bane of my existence! You are brave to have attempted it.  Cool

This reminds me of a feature I wish existed somewhere; I'd call it "gravity". It would let you virtually "drop" loose pieces onto a surface or into a container, and they would lie naturally. (I guess this would require at least collision info, along with some way of modeling the mass and center of gravity of a part?)
Reply
RE: 10281 - Bonsai
#39
(2021-01-07, 23:43)N. W. Perry Wrote: AAAH—that sort of thing is the bane of my existence! You are brave to have attempted it.  Cool

This reminds me of a feature I wish existed somewhere; I'd call it "gravity". It would let you virtually "drop" loose pieces onto a surface or into a container, and they would lie naturally. (I guess this would require at least collision info, along with some way of modeling the mass and center of gravity of a part?)
...and friction between parts...
Impressive (and beautiful) work Orion!
Reply
RE: 10281 - Bonsai
#40
(2021-01-08, 8:22)Philippe Hurbain Wrote: ...and friction between parts...
Impressive (and beautiful) work Orion!

Yes, friction…if you wanted to actually model how pieces fall into a pile. Although I'd be happy enough to be able to drag a part straight down until it collides with another part, then use that contact point as a pivot point to rotate the part into a position of rest.

And I concur—beautiful model!
Reply
RE: 10281 - Bonsai
#59
(2021-01-08, 8:22)Philippe Hurbain Wrote: ...and friction between parts...
Impressive (and beautiful) work Orion!

Well…it's not Lego exactly…but the script on this page is sort of on the right track (you have to click stuff to make things happen):
https://www.stefanobovio.it/test/03-polygons.html
Reply
RE: Creator Expert 10295 - Porsche 911 Targa & Porsche 930 Turbo
#43
10295 - Porsche 911 / 930

   

   

   

   


OMR Compliance : Yes, but unofficial parts not implemented.

Missing : Nothing



.mpd   10295 - Porsche 911 Targa.mpd (Size: 66.02 KB / Downloads: 15)


.mpd   10295 - Porsche 930 Turbo.mpd (Size: 77.55 KB / Downloads: 20)
Reply
10283-1 - NASA Space Shuttle Discovery
#44
Sneak peek. The set will be arriving on Friday so I can model the patterns, solar panels, and stickers. The windshield will be trickier and I'll prolly need help from more seasoned authors.

   
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#45
(2021-04-06, 4:01)Orion Pobursky Wrote: Sneak peek. The set will be arriving on Friday so I can model the patterns, solar panels, and stickers. The windshield will be trickier and I'll prolly need help from more seasoned authors.

I did not find a picture of the bottom of the windshield so far, that would be good.
Also the panels of the cargo bay need to be done!
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#47
(2021-04-06, 9:28)Gerald Lasser Wrote: I did not find a picture of the bottom of the windshield so far, that would be good.
Also the panels of the cargo bay need to be done!

Photos of the windscreen are attached to this post


Attached Files Thumbnail(s)
               
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#48
(2021-04-17, 18:45)Orion Pobursky Wrote: Photos of the windscreen are attached to this post

Thanks!

I uploaded the part, let me know if the fit is ok! The I will do the pattern
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#50
(2021-04-06, 4:01)Orion Pobursky Wrote: Sneak peek. The set will be arriving on Friday so I can model the patterns, solar panels, and stickers. The windshield will be trickier and I'll prolly need help from more seasoned authors.

Stickers are done. 5 patterns, 2 formed stickers, and one sticker shortcut left. Plus I'm about 75% done with the model itself.
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#51
(2021-04-22, 13:13)Orion Pobursky Wrote: Stickers are done. 5 patterns, 2 formed stickers, and one sticker shortcut left. Plus I'm about 75% done with the model itself.

Do you want to do the windscreen? Here's a half I did with the available pictures, feel free to adapt it to the real part?


Attached Files
.dat   76796p01s01.dat (Size: 13.8 KB / Downloads: 2)
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#52
(2021-04-22, 14:02)Gerald Lasser Wrote: Do you want to do the windscreen? Here's a half I did with the available pictures, feel free to adapt it to the real part?

I'm on a short vacation so if you want to finish that's fine.
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#53
(2021-04-22, 13:13)Orion Pobursky Wrote: Stickers are done. 5 patterns, 2 formed stickers, and one sticker shortcut left. Plus I'm about 75% done with the model itself.

3 patterns left...
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#54
Here's a HQ POV Render. This was faster than Studio (on my machine) and looks just as good IMO. The MPD is attached. NOT OMR compliant, doesn't have the bracket for displaying the Hubble in the cargo bay, and is missing 2 (not visible) patterned parts (I'm suffering from being overly perfectionist right now).

   


Attached Files
.mpd   10283.mpd (Size: 1.66 MB / Downloads: 16)
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#55
(2021-05-26, 2:07)Orion Pobursky Wrote: Here's a HQ POV Render. This was faster than Studio (on my machine) and looks just as good IMO. The MPD is attached. NOT OMR compliant, doesn't have the bracket for displaying the Hubble in the cargo bay, and is missing 2 (not visible) patterned parts (I'm suffering from being overly perfectionist right now).

Hi! Newbie here.

First off, I'm so grateful you made this model! You've saved me hours of frustration and modeling (especially since I've never modeled Lego!).

I searched the forums, but can't quite find the answer to my question. When I load the MPD into LDCAD, part 76798 is missing (description from Unofficial file parts section: 5 x  8 x  3.667 Curved with Two Axleholes). I tried downloading it separately and putting it in my directory, but that doesn't seem to solve the issue. How do I get that part to pop in?

I want to be able to import it into Blender or Maya so I can convert to an .obj, but I can't seem to get that dang part to load in  Confused

Any help would be super appreciated! And thank you again for all your work!
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#56
Hi Nikki,

Now that the missing pattern is uploaded to the tracker, I'll update the MPD which will, hopefully, fix your issue. I'll post again when that happens. If there are other issues after, I'll happily walk through them with you.
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#58
(2021-10-27, 19:30)Orion Pobursky Wrote: Hi Nikki,

Now that the missing pattern is uploaded to the tracker, I'll update the MPD which will, hopefully, fix your issue. I'll post again when that happens. If there are other issues after, I'll happily walk through them with you.

That worked perfectly! Thank you!

I'll be projection mapping onto my own physical set/model, but it's so much easier to map the content with a 3D model in the program first.

This "very overwhelmed and behind on everything" grad student thanks you  Heart
Reply
RE: 10283-1 - NASA Space Shuttle Discovery
#57
Here's the OMR Compliant file
TEXMAP image not embedded
Missing: Bracket for attaching the HST to the shuttle and the tubes simulating the stowed solar arrays.
Notes: As per the note above, the model is only shown with the HST deployed.


Attached Files
.mpd   10283.mpd (Size: 2.92 MB / Downloads: 2)
Reply
[Placeholder] 10294-1 Titanic
#60
This is a placeholder for the Titanic.

I'll start to build this weekend. If anybody owns the set I would like to create the patterns and flags as well.
Edit: first section finished.

/Max
Reply
RE: [Placeholder] 10294-1 Titanic
#61
(2021-11-09, 7:51)Max Martin Richter Wrote: This is a placeholder for the Titanic.

I'll start to build this weekend. If anybody owns the set I would like to create the patterns and flags as well.

/Max

I'm also trying to build the Titanic, but as you probably have noticed, there are a lot of pieces missing. Do you know how to make these missing pieces?
Reply
RE: [Placeholder] 10294-1 Titanic
#62
(2021-11-15, 21:01)Natalie Schauw Wrote: I'm also trying to build the Titanic, but as you probably have noticed, there are a lot of pieces missing. Do you know how to make these missing pieces?

Except of the patterned parts and flags I noticed, that several click hinges ares missing. Actually I substitute them with available ones. Some of them are easy to create, some not. I'm going to create some of them parallel while modelling and some when the model is finished.
Do you own the set physically? If yes, you could provide some pictures or scans of the patterns and the flags. ;-)

/Max
Reply
RE: [Placeholder] 10294-1 Titanic
#63
(2021-11-19, 21:34)Max Martin Richter Wrote: Except of the patterned parts and flags I noticed, that several click hinges ares missing. Actually I substitute them with available ones. Some of them are easy to create, some not. I'm going to create some of them parallel while modelling and some when the model is finished.
Do you own the set physically? If yes, you could provide some pictures or scans of the patterns and the flags. ;-)

/Max

Unfortunately I do not own the set physically :-(
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)