Parts we are working on


Parts we are working on
#1
Post here Number/Description (preferably also with a link) of the parts you are currently working on.
LEGO ergo sum
Re: Parts we are working on
#2
this thread is a Very Good Idea ™
Re: Parts we are working on (74188)
#3
I think, that this part isn't in our library (or I'm not able to find it).
74188
This is the magnetbrick for the minifigs.
The underside is ready. At the moment I'm working on the main part.
Do you have any ideas how to model the "torx-screw" ?

Estimated time for upload to the PT: late end of 2012.

/Max
Re: Parts we are working on (74188)
#4
Quote:I think, that this part isn't in our library (or I'm not able to find it).74188
Yes, AFAIK it's missing.
Quote:Do you have any ideas how to model the "torx-screw" ?
Other screw are modelled as simple cylinder without thread. I think we should go on this way, adding threads is pure waste of resources (work-wise and facet-wise).
Re: Parts we are working on (10051)
#5
Working on it, based on Rolf's mesh.
Re: I'm working om 4480c01 (Old MC)
#6
I am working on a replacement for this MC.
[Image: x81.gif?0]
It's already on the PT, but needs a rewrite. See this thread too.
The main structure is finished and I'm now working on the hidden connector between body and fork.
I hope to be finished within a month.

Edit: This part is now done and uploaded at PT as 4480c01.dat
Re: Parts we are working on (10051)
#7
Done.
[Image: 10051.png][Image: 10051p01.png]
Re: Parts we are working on (10051)
#8
As always - great work! :-)
Re: Parts we are working on (42942)
#9
I am working on this part (sometimes).
[Image: 42942.jpg]
Rolf
Re: Parts we are working on (42942)
#10
Great! I have waited so long and did not get it right myself. Thanks!

Edit:
I just digged what I have so far. Maybe also 42941 can be done Smile


Attached Files
.dat   42942.dat (Size: 2.64 KB / Downloads: 10)
.dat   42941.dat (Size: 2.15 KB / Downloads: 5)
Re: Parts we are working on
#11
I will do the new thin 1 x 5 liftarm with axleholes until tomorrow. (At the moment I don't have the part number for it).

/Max
Re: Parts we are working on
#12
The part is now uploaded. Actually I have used an u-number for it.

/Max
Re: Parts we are working on (74188)
#13
Part is ready:
[Image: 90754.png]


/Max

[sub]edit: partnumber correction in link and picture[/sub]
Re: Parts we are working on
#14
I will try to find out a bit more about 11610. Especially of the how the stud is mould onto the cone.

/Max
Re: Parts we are working on
#15
I can not find a part with that number! Where is this number from?
Re: Parts we are working on
#16
It comes from here:
http://www.brickset.com/parts/?part=6017003

/Max
Re: Parts we are working on
#17
At the moment it's not possible do do this part, cause there are no informations about it in the internet. 2 or 3 pictures but I can't see any dimensions on them.
Sorry...(but I still try to find such a part in the real world)

/Max
Re: Parts we are working on (2426)
#18
I got such a brick today. And I hope, that I find the time to rework it asap.
It is very hard to open. I have no idea how to disassemble it for the moment.
It's opened now. But is very hard damaged at some areas now. This will be the first part I have to throw away without building it into at least one model...

/Max
Parts we are working on (30113)
#19
[Image: x175.jpg]

30113 - Minifig Accessory Helmet Horned

Part of fourth LU batch
LEGO ergo sum
Re: 30113 - Minifig Accessory Helmet Horned
#20
Any photo of stud side?
Re: 30113 - Minifig Accessory Helmet Horned
#21
I'll check before I upload. That's peanuts compared to the millions of cond. lines this part comes.

w.
LEGO ergo sum
Re: 30113 - Minifig Accessory Helmet Horned
#22
Not sure to understand - do you intend to submit it, or do you want someone to work on it?
Re: 30113 - Minifig Accessory Helmet Horned
#23
Well this is the "Parts we are working on" thread. So, yes, I'm cleaning it.

w.
LEGO ergo sum
Re: 30113 - Minifig Accessory Helmet Horned
#24
Sorry, misread the thread title!
2349 and other hinges...
#25
While doing the BFC'ing for 2348a.dat, I checked the parts 2348b.dat and 2349.dat. In my opinion they need to be a bit improved. I'm now working on 2349.dat. (2348a and b are ready and will go out with all other involved parts). I think, I will add the bumps for the hinges. That means that I need to do the other hinges as well...Whohoo Wink

/Max
Re: Parts we are working on
#26
[Image: buzzsaw.png]

I've forgotten how satisfying it feels to get something like those saw blades modeled..
EDIT: done
A new pattern for 2454ps5
#27
Is this any better?

I have here attached an attempt to improve the pattern for 2454ps5.

Do you think it is better or worse than the current part at PT?


Attached Files
.dat   mask123.dat (Size: 138.59 KB / Downloads: 1)
Re: A new pattern for 2454ps5
#28
I hope that is not a real question Smile
This one is IMHO much better.
Re: A new pattern for 2454ps5
#29
The pattern distorts when viewed further away.. maybe direct colors would do better here?
Re: A new pattern for 2454ps5
#30
Much better, I agree! Must have been pretty tedious Wink
How did you mapped the gradient on the character?
Re: A new pattern for 2454ps5
#31
I've created the new pattern with LPC, of course.
I first made one mask of the unpatterned surface surrounding the pattern.
On top of that, or maybe behind it, I placed many differently stretched versions of a triangular raster pattern.
By selecting overlapping triangles and using the "SCG Intersection points" I got a set of new vertices.
I then connected these new vertices with "Merge with nearest triangle" and removed the unwanted triangles.
Many triangles it is....
Re: A new pattern for 2454ps5
#32
Nice now, the pattern is. Excellent piece of work, done, you have.
Chris (LDraw Parts Library Admin)
Re: A new pattern for 2454ps5
#33
Phew Tongue
Re: Parts we are working on (13548)
#34
Working on 13548...
Re: Parts we are working on
#35
33287
Re: Parts we are working on
#36
Santeri Piippo Wrote:33287
Thanks for showing me a part I ignored Wink
Re: Parts we are working on (13548)
#37
Here it is:
http://www.ldraw.org/cgi-bin/ptdetail.cg.../13548.dat

BTW, I discovered this part here: The New Elementary
Re: Parts we are working on (13548)
#38
Hehe, I just got a link to this great site a few minutes ago.
And I thought about doing this part, too. :-)
Well done!

/Max
Re: Parts we are working on
#39
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg.../33287.dat
14769
#40
It's a new version of the 2 x 2 tile, round.
I will add the groove to 4150 to.
Re: 14769
#41
Been working on cleaning up 61805 today.
Re: Parts we are working on
#42
I'm working on all the Iron Man suits

Mark VI : done, uploaded, official

Mark VII : done, not yet uploded

War Machine : done, not yet uploaded

Mark XVII (Heartbreaker) : started

Mark XLII : not started

Iron Patriot : not started, missing good pictures, seems to be much the same as War Machine, but with different colours
Re: Parts we are working on
#43
I am curently working on 55706s01.dat.
In the meantime trying to figure out all the programs which to enhanse parts.

Its going to look better, one baby step at a time.
Rempie

Lego omnia vincit (Lego conquers all), pro fide lege et Lego (For Faith, Justice, and lego)
Re: Parts we are working on
#44
testing ldforge 0.3 with 44937:
[Image: 44937__.png]

EDIT: done now: http://www.ldraw.org/cgi-bin/ptdetail.cg.../44937.dat
Re: Parts we are working on
#45
I'm working on the Speedorz chassis parts 11125c01.
Chris (LDraw Parts Library Admin)
Re: Parts we are working on
#46
So now that my vbo renderer's actually functional I'm back to doing shields to test it...

[Image: 41659_.png]

So I spend an hour trying to model 41659's little recesses, and I just finally got them done in a clean manner. And then I realize there's two more similar recesses on the other side of the part. D'oh.
Re: Parts we are working on
#47
I'm working on this strange hinge thingy, as seen in this review at the New Elementary.

[Image: 6065019.jpg]
Re: Parts we are working on
#48
Looks like nobody has worked on any parts for a while ;-)
I've started on the PF Track points: 53404 (right), 53407 (left) and 60128 (crossover).
973pd1 Minifig Torso with Open Jacket, Blue Top and Navel Pattern
#49
There is already a placeholder for 973pd1 on the Parts Tracker.
http://www.ldraw.org/cgi-bin/ptpatterns.cgi?p=973

http://brickset.com/sets/4062-1/Actress
https://alpha.bricklink.com/pages/clone/...=5#T=C&C=5

I work on other patterns too... to test and improve LDPatternCreator.

edit: It's done.
Re: Parts we are working on
#50
Can you Do lego DC Super Heroes Minifigure Torsos & heads?


Attached Files Thumbnail(s)
   
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)