cheese slope dimensions


cheese slope dimensions
#1
This is my first post. I hope I follow all guidelines.

I want to know the dimensions of a cheese slope tile. I have downloaded the 54200.dat parts file, but I'm not sure how to interpret it. Can anybody help me?

I am interested in knowing the exact length of the side with a length of approximately 8.5mm:
http://www.flickr.com/photos/ltdemartinet/4293993602

Thank you,
Tommy

Here are the contents of 54200.dat:
0 Slope Brick 31 1 x 1 x 2/3
0 Name: 54200.dat
0 Author: Orion Pobursky [OrionP]
0 !LDRAW_ORG Part UPDATE 2009-02
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2006-01-14 [cwdee] Rotated to match other slope bricks
0 !HISTORY 2009-09-03 [PTadmin] Official Update 2009-02

2 24 10 -16 10 10 -1 10
2 24 -10 -16 10 -10 -1 10
2 24 -10 -4 -10 -10 -1 -10
2 24 10 -4 -10 10 -1 -10
2 24 10 -1 10 -10 -1 10
2 24 10 -1 -10 -10 -1 -10
2 24 10 -16 10 -10 -16 10
2 24 10 -4 -10 -10 -4 -10
2 24 10 -1 10 10 -1 -10
2 24 -10 -1 10 -10 -1 -10
2 24 -10 -16 10 -10 -4 -10
2 24 10 -16 10 10 -4 -10
4 16 -10 -16 10 -10 -1 10 -10 -1 -10 -10 -4 -10
4 16 10 -16 10 10 -4 -10 10 -1 -10 10 -1 10
4 16 10 -16 10 10 -1 10 -10 -1 10 -10 -16 10
4 16 6 -10.6 6 -6 -10.6 6 -6 0 6 6 0 6
4 16 6 -3.4 -6 6 0 -6 -6 0 -6 -6 -3.4 -6
4 16 10 -4 -10 -10 -4 -10 -10 -1 -10 10 -1 -10
4 16 -10 -16 10 -10 -4 -10 10 -4 -10 10 -16 10
2 24 9 0 9 -9 0 9
2 24 9 0 -9 -9 0 -9
1 16 0 -1 0 0 0 9 0 1 0 -9 0 0 box4.dat
4 16 10 -1 -10 9 -1 -9 9 -1 9 10 -1 10
4 16 -10 -1 10 -9 -1 9 -9 -1 -9 -10 -1 -10
4 16 10 -1 10 9 -1 9 -9 -1 9 -10 -1 10
4 16 -10 -1 -10 -9 -1 -9 9 -1 -9 10 -1 -10
4 16 6 0 -6 6 0 6 9 0 9 9 0 -9
4 16 -6 0 6 -6 0 -6 -9 0 -9 -9 0 9
4 16 -6 0 -6 6 0 -6 9 0 -9 -9 0 -9
4 16 6 0 6 -6 0 6 -9 0 9 9 0 9
4 16 6 -10.6 6 6 0 6 6 0 -6 6 -3.4 -6
4 16 -6 -10.6 6 -6 -3.4 -6 -6 0 -6 -6 0 6
2 24 6 0 6 -6 0 6
2 24 6 0 -6 -6 0 -6
2 24 6 0 -6 6 0 6
2 24 -6 0 -6 -6 0 6
2 24 6 -10.6 6 -6 -10.6 6
2 24 6 -3.4 -6 -6 -3.4 -6
2 24 6 -3.4 -6 6 -10.6 6
2 24 -6 -3.4 -6 -6 -10.6 6
2 24 -6 -10.6 6 -6 0 6
2 24 6 -10.6 6 6 0 6
2 24 6 -3.4 -6 6 0 -6
2 24 -6 -3.4 -6 -6 0 -6
4 16 -6 -10.6 6 6 -10.6 6 6 -4 -5 -6 -4 -5
3 16 -3.1092 -4 -5 -2.2961 -4 -5.5434 -2.2961 -3.674 -5.5434
5 24 -2.2961 -4 -5.5434 -2.2961 -3.674 -5.5434 -3.1092 -4 -5 -2.2961 -4 -5.5434
4 16 -2.2961 -4 -5.5434 0 -4 -6 0 -3.4 -6 -2.2961 -3.674 -5.5434
5 24 0 -4 -6 0 -3.4 -6 -2.2961 -4 -5.5434 2.2961 -4 -5.5434
4 16 0 -4 -6 2.2961 -4 -5.5434 2.2961 -3.674 -5.5434 0 -3.4 -6
5 24 2.2961 -4 -5.5434 2.2961 -3.674 -5.5434 3.1092 -4 -5 2.2961 -4 -5.5434
3 16 3.1092 -4 -5 2.2961 -3.674 -5.5434 2.2961 -4 -5.5434
2 24 -3.1092 -4 -5 -2.2961 -4 -5.5434
2 24 -2.2961 -4 -5.5434 0 -4 -6
2 24 2.2961 -4 -5.5434 0 -4 -6
2 24 3.1092 -4 -5 2.2961 -4 -5.5434
2 24 -3.1092 -4 -5 -2.2961 -3.674 -5.5434
2 24 -2.2961 -3.674 -5.5434 0 -3.4 -6
2 24 2.2961 -3.674 -5.5434 0 -3.4 -6
2 24 3.1092 -4 -5 2.2961 -3.674 -5.5434
2 24 -3.1092 -4 -5 3.1092 -4 -5
4 16 -3.1092 -4 -5 0 -4 -5 0 -4 -6 -2.2961 -4 -5.5434
4 16 3.1092 -4 -5 2.2961 -4 -5.5434 0 -4 -6 0 -4 -5
4 16 -3.1092 -4 -5 -2.2961 -3.674 -5.5434 -6 -3.4 -6 -6 -4 -5
3 16 -6 -3.4 -6 -2.2961 -3.674 -5.5434 0 -3.4 -6
4 16 3.1092 -4 -5 6 -4 -5 6 -3.4 -6 2.2961 -3.674 -5.5434
3 16 6 -3.4 -6 0 -3.4 -6 2.2961 -3.674 -5.5434
0
Reply
Re: cheese slope dimensions
#2
The cheese slope is 1x1, so 20LDU x 20LDU. Just looking at the LDraw code you posted, it looks like its 16 LDU tall. (I see Y values from 0 to -16.)

The approximate answer in the real world is that one LDraw Unit is equal to 0.4mm, so the cheese slope would be 8x8x6.4 (mm). The exact answer is much more complicated, so you should see this here:

http://www.lugnet.com/~330/FAQ/Build/dimensions
Reply
Re: cheese slope dimensions
#3
have you seen this mosaics tutorial?
it could help in finding the proper dimensions
http://mosaicbricks.blogspot.de/2012/06/...orial.html
Reply
Re: cheese slope dimensions
#4
I took a real one: Due to the fact, that we don't model the seams between the parts (but the viewers can show them by a special setting) all parts in the our Library are a bit too wide. (It's about 0.2 mm).
The real brick is 7.8 x 7.8 x 6.2 mm. The lowest point of the slope is at 1.8 mm. The groove for the fingernails is 0.5 mm high.
The library dimension had been posted correctly by Travis.

/Max
Reply
Re: cheese slope dimensions
#5
Max, those were exactly the measurements I needed. The length of the sloped side is then:
sqrt( (6.2-1.8)^2 + 7.8^2 ) ~ 8.955mm ~ 114.8% of the 7.8mm side.

Thank you very much for your kind help!

Mit freundlichen Grussen,
Tommy
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)