Model Team


Model Team
#1
I've been working on building some of the 80s and 90s Model Team sets in MLCad and noticed they are not in the repository here.  I'm planning to post more, including alternate models, as I make them OMR compliant, but I suppose I'll wait for this one to be reviewed first so I know if there's anything I need to fix.

5571 Giant Truck (a.k.a. Black Cat) [primary model]
Download MPD file
Substitutions: 32004b.dat (Wheel Rim 18 x 41 Model Team Type 2) for missing part 32004a.dat
Reply
RE: Model Team
#2
(2017-11-14, 23:37)Tim Singer Wrote: I've been working on building some of the 80s and 90s Model Team sets in MLCad and noticed they are not in the repository here.  I'm planning to post more, including alternate models, as I make them OMR compliant, but I suppose I'll wait for this one to be reviewed first so I know if there's anything I need to fix.

5571 Giant Truck (a.k.a. Black Cat) [primary model]
Download MPD file
Substitutions: 32004b.dat (Wheel Rim 18 x 41 Model Team Type 2) for missing part 32004a.dat

Hmm. It seems nobody replied to you yet. To be honest, your post went under my radar too  Sad
Well, better late then never I suppose... I took a look at your file and it looks perfect to me. I have added it to the OMR.
Reply
RE: Model Team
#3
Here are the A and B model of Model Team set 5540. The A-Model doesn't have the stickers yet, B-model doesn't use the stickers.

They're created with MLCad and contain also metacommands for LPub 3D.
They should be OMR compliant, please let me know if they're not.

   
   


Attached Files
.mpd   5540 - A.mpd (Size: 60.2 KB / Downloads: 15)
.mpd   5540 - B.mpd (Size: 29.44 KB / Downloads: 11)
Reply
RE: Model Team
#4
Believe it or not I don't remember this!

According to the OMR Spec:
https://www.ldraw.org/article/593.html

the file name should be something like:

5540 - Formula I Racer - A Model.mpd
5540 - Formula I Racer - B Model.mpd

Did you run it through MPDCenter or tried https://brickhub.org/ which also gives you some clues?

w.
LEGO ergo sum
Reply
RE: Model Team
#5
(2019-07-27, 23:18)Willy Tschager Wrote: Believe it or not I don't remember this!

According to the OMR Spec:
https://www.ldraw.org/article/593.html

the file name should be something like:

5540 - Formula I Racer - A Model.mpd
5540 - Formula I Racer - B Model.mpd

Did you run it through MPDCenter or tried https://brickhub.org/ which also gives you some clues?

w.

It'll get fixed when it's added to the OMR. Just remember for the future.
Reply
RE: Model Team
#6
(2019-07-27, 23:27)Orion Pobursky Wrote: It'll get fixed when it's added to the OMR. Just remember for the future.

Fixed the files and uploaded to the OMR.
If nothing goes right, go left.
Reply
RE: Model Team
#7
5510 - Off Road 4 x 4

Main model:
   

.mpd   5510 - Off Road 4 x 4 - Main model.mpd (Size: 225.77 KB / Downloads: 10)

OMR compliant: Yes
Complete: Yes
Errors: None (note: unofficial revisions of 4208 and 4330 are inlined; remove "u" from partnames to use official versions)
Done with LDCad v1.6d
Reply
RE: Model Team
#8
5510 - Off Road 4 x 4

B model:
(variously described as a tow truck or crane)
   

.mpd   5510 - Off Road 4 x 4 - Tow Truck.mpd (Size: 214.96 KB / Downloads: 6)

OMR compliant: Yes
Complete: Yes
Errors: None (note: unofficial revisions of 4208 and 4330 are inlined; remove "u" from partnames to use official versions)
Done with LDCad v1.6d

Placement of the front and rear stickers isn't indicated in the instructions, but can be determined from box artwork photos.
Reply
RE: Model Team
#9
(2019-07-27, 16:28)Rene Frijhoff Wrote: Here are the A and B model of Model Team set 5540. The A-Model doesn't have the stickers yet, B-model doesn't use the stickers.

They're created with MLCad and contain also metacommands for LPub 3D.
They should be OMR compliant, please let me know if they're not.

I'm doing the stickers now for this set. I had to approximate the sizes from the BL image along with clues from the instructions, but most of them turned out slightly too large. (This seems true to life, actually; in photos I've seen of the real model, some stickers do seem to be cut a bit too big to fit.) So I just need to revise the dimensions.

If anyone does know the real measurements, of course, that would be handy!
Reply
RE: Model Team
#10
5540 - Formula 1 Racer

Main model:
   

.mpd   5540 - Formula 1 Racer- Main model.mpd (Size: 205.59 KB / Downloads: 12)

An alternate version including stickers.

There are also two versions of the flexible hoses inlined. Those with filenames ending in "-o" can be used when the engine cowl is removed, giving the hoses a more natural curvature when they are not compressed by the cowl. Just select all the hoses and toggle the MLCad HIDE metas to switch versions.

OMR compliant: Yes
Complete: Yes
Errors: None
Done with LDCad v1.6d
Reply
5542-1 Black Thunder
#11
OMR Compliant

Stickers included

   


.mpd   5542-1 - Black Thunder.mpd (Size: 97.91 KB / Downloads: 10)
Reply
5580 - Highway Rig
#12

.mpd   5580 - Highway Rig.mpd (Size: 37.09 KB / Downloads: 8)
   

Currently not OMR compliant (unofficial sticker not inlined)
Missing items: none
Reply
5590 - Whirl and Wheel Super Truck
#13
The first regular set consists of 1000+ pieces!!


.mpd   5590 - Whirl and Wheel Super Truck.mpd (Size: 71.95 KB / Downloads: 7)
   

OMR compliant
Missing items: none

EDIT 2022-08-06: Updated MPD, corrected moved-to references and got OMR compliant with 2022-04 parts update
Reply
5550 - Custom Rally Van
#14
5550 Custom Rally Van (1991)


.mpd   5550 - Custom Rally Van.mpd (Size: 25.99 KB / Downloads: 7)
   

Currently not OMR compliant (Unofficial stickers not inlined)
Missing items: none
Reply
RE: Model Team
#15
5590 B Model:


.mpd   5590 - Helicopter Super Transporer - Fire Truck.mpd (Size: 44.83 KB / Downloads: 5)
   

Note: The name is from Uk catalog

File is OMR compliant and have no items missed
Reply
RE: Model Team
#16
(2022-08-04, 21:24)Javier Orquera Wrote: 5590 B Model:




Note: The name is from Uk catalog

File is OMR compliant and have no items missed

Dear Javier,

Thanks for creating B-model!!
I've noticed the A-model got OMR compliant by latest parts update (the formed sticker became official) and updated it.
Reply
5521 - Sea Jet
#17
5521 Sea Jet (1993)


.mpd   5521 - Sea Jet.mpd (Size: 20.57 KB / Downloads: 2)
   

Originally created by Orion, and updated with official stickers

OMR compliant
Missing items: none
Reply
RE: Model Team
#18
Thanks for the stickers Takeshi! Here is the 5521 B-Model from the instruction book.

5521 - Sea Jet - B (1993)

.ldr   5521 - Sea Jet - B.ldr (Size: 22.49 KB / Downloads: 0)
   

OMR compliant: yes
Missing items: none
Made in: Studio, LDR export checked in MPD Center
Reply
RE: Model Team
#19
(2023-08-20, 6:54)legolex76 Wrote: Thanks for the stickers Takeshi! Here is the 5521 B-Model from the instruction book.

5521 - Sea Jet - B (1993)



OMR compliant: yes
Missing items: none
Made in: Studio, LDR export checked in MPD Center

Actually the stickers are not created by me, I've only updated  the A-model.
Thanks to Damien for stickers and shortcuts.
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)