Part 71981,6182721,6073604,2214……


Part 71981,6182721,6073604,2214……
#1
Hello, everyone.
Yesterday I saw a post about Lego simple machinery, and in fact I needed some parts about Lego 45002. This is a list of parts I find first, and who can help me make these parts. Of course I know it will be a huge amount of work, and if you want, I can make it with building blocks. However, I need some tutorials on the network, because of the differences in language, I understand more slowly.

https://brickset.com/parts/design-71981
https://brickset.com/parts/6182721/duplo...ew-6x6x2-5
https://brickset.com/parts/6073604/duplo...er-cockpit
https://brickset.com/parts/design-2214
https://brickset.com/parts/design-99565
https://brickset.com/parts/design-76057
https://brickset.com/parts/design-44970
https://brickset.com/parts/design-60535
https://brickset.com/parts/design-2206
https://brickset.com/parts/design-76395
https://brickset.com/parts/design-17215
https://brickset.com/parts/design-42029
https://brickset.com/parts/design-45146
https://brickset.com/parts/design-89465
https://brickset.com/parts/design-74957
https://brickset.com/parts/design-28336
https://brickset.com/parts/design-28336
https://brickset.com/parts/design-28336
Reply
RE: Part 71981,6182721,6073604,2214……
#2
Unfortunately I have none of these parts, and some are fairly complex to build... Of course we can try to help you if you try to model them! Unfortunately LDPE is sorely missing good tutorials. Maybe this one can help http://jc-tchang.philohome.com/manuel/LDPartEditor.htm ? it's written in French, but hopefully Google translate can help on this...
Reply
RE: Part 71981,6182721,6073604,2214……
#3
(2017-06-06, 8:48)Philippe Hurbain Wrote: Unfortunately I have none of these parts, and some are fairly complex to build... Of course we can try to help you if you try to model them! Unfortunately LDPE is sorely missing good tutorials. Maybe this one can help http://jc-tchang.philohome.com/manuel/LDPartEditor.htm ? it's written in French, but hopefully Google translate can help on this...
Can I use SolidWorks or 3DMAX software to translate modeling into DAT format?
Reply
RE: Part 71981,6182721,6073604,2214……
#4
(2017-06-06, 15:20)yongxu wang Wrote: Can I use SolidWorks or 3DMAX software to translate modeling into DAT format?

Sure stl2dat https://sourceforge.net/projects/stl2dat/ is your friend. Don't forget to model using LDUs rather than mm or inches.

w.
LEGO ergo sum
Reply
RE: Part 71981,6182721,6073604,2214……
#5
If you don't like command line interface, you can also use LETGUI that includes Stl2Dat tool.
Also note that Stl2Dat works well only with ASCII stl files, not with binary stl variant.
Reply
RE: Part 71981,6182721,6073604,2214……
#6
(2017-06-06, 18:56)Philippe Hurbain Wrote: If you don't like command line interface, you can also use LETGUI that includes Stl2Dat tool.
Also note that Stl2Dat works well only with ASCII stl files, not with binary stl variant.
Why flash back when I install?
Reply
RE: Part 71981,6182721,6073604,2214……
#7
(2017-06-07, 4:55)yongxu wang Wrote:
(2017-06-06, 18:56)Philippe Hurbain Wrote: If you don't like command line interface, you can also use LETGUI that includes Stl2Dat tool.
Also note that Stl2Dat works well only with ASCII stl files, not with binary stl variant.
Why flash back when I install?
You mean, stl2dat or letgui? stl2dat is a command line tool, expecting command line parameters. If it has no parameters, it (very) briefly pops up a help screen and closes. To use it you should open a command line prompt, then type in the command with its parameters. If the problem is with LETGUI... I don't know. Do you have .NET installed?
Reply
RE: Part 71981,6182721,6073604,2214……
#8
(2017-06-07, 6:59)Philippe Hurbain Wrote:
(2017-06-07, 4:55)yongxu wang Wrote: Why flash back when I install?
You mean, stl2dat or letgui? stl2dat is a command line tool, expecting command line parameters. If it has no parameters, it (very) briefly pops up a help screen and closes. To use it you should open a command line prompt, then type in the command with its parameters. If the problem is with LETGUI... I don't know. Do you have .NET installed?
I installed stl2dat
Reply
RE: Part 71981,6182721,6073604,2214……
#9
(2017-06-07, 9:00)yongxu wang Wrote: I installed stl2dat
Then you must use a command line prompt. But it you are not comfortable with this, install LETGUI instead!
[url=https://www.lifewire.com/how-to-open-command-prompt-2618089][/url]
Quote:Don't forget to model using LDUs rather than mm or inches.
Note: 1ldu = 0.4mm
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)
Forum Jump:


Users browsing this thread: 1 Guest(s)