Part 71981,6182721,6073604,2214……

Part 71981,6182721,6073604,2214…… - Printable Version

+- LDraw.org Discussion Forums (https://forums.ldraw.org)
+-- Forum: Models and Parts (https://forums.ldraw.org/forum-18.html)
+--- Forum: Part Requests (https://forums.ldraw.org/forum-30.html)
+--- Thread: Part 71981,6182721,6073604,2214…… (/thread-22186.html)

RE: Part 71981,6182721,6073604,2214…… - Philippe Hurbain - 2017-06-06

Unfortunately I have none of these parts, and some are fairly complex to build... Of course we can try to help you if you try to model them! Unfortunately LDPE is sorely missing good tutorials. Maybe this one can help http://jc-tchang.philohome.com/manuel/LDPartEditor.htm ? it's written in French, but hopefully Google translate can help on this...

RE: Part 71981,6182721,6073604,2214…… - yongxu wang - 2017-06-06

(2017-06-06, 8:48)Philippe Hurbain Wrote: Unfortunately I have none of these parts, and some are fairly complex to build... Of course we can try to help you if you try to model them! Unfortunately LDPE is sorely missing good tutorials. Maybe this one can help http://jc-tchang.philohome.com/manuel/LDPartEditor.htm ? it's written in French, but hopefully Google translate can help on this...

Can I use SolidWorks or 3DMAX software to translate modeling into DAT format?

RE: Part 71981,6182721,6073604,2214…… - Willy Tschager - 2017-06-06

(2017-06-06, 15:20)yongxu wang Wrote: Can I use SolidWorks or 3DMAX software to translate modeling into DAT format?

Sure stl2dat https://sourceforge.net/projects/stl2dat/ is your friend. Don't forget to model using LDUs rather than mm or inches.

w.

RE: Part 71981,6182721,6073604,2214…… - Philippe Hurbain - 2017-06-06

If you don't like command line interface, you can also use LETGUI that includes Stl2Dat tool.
Also note that Stl2Dat works well only with ASCII stl files, not with binary stl variant.

RE: Part 71981,6182721,6073604,2214…… - yongxu wang - 2017-06-07

(2017-06-06, 18:56)Philippe Hurbain Wrote: If you don't like command line interface, you can also use LETGUI that includes Stl2Dat tool.
Also note that Stl2Dat works well only with ASCII stl files, not with binary stl variant.

Why flash back when I install?

RE: Part 71981,6182721,6073604,2214…… - Philippe Hurbain - 2017-06-07

(2017-06-07, 4:55)yongxu wang Wrote:
(2017-06-06, 18:56)Philippe Hurbain Wrote: If you don't like command line interface, you can also use LETGUI that includes Stl2Dat tool.
Also note that Stl2Dat works well only with ASCII stl files, not with binary stl variant.
Why flash back when I install?

You mean, stl2dat or letgui? stl2dat is a command line tool, expecting command line parameters. If it has no parameters, it (very) briefly pops up a help screen and closes. To use it you should open a command line prompt, then type in the command with its parameters. If the problem is with LETGUI... I don't know. Do you have .NET installed?

RE: Part 71981,6182721,6073604,2214…… - yongxu wang - 2017-06-07

(2017-06-07, 6:59)Philippe Hurbain Wrote:
(2017-06-07, 4:55)yongxu wang Wrote: Why flash back when I install?
You mean, stl2dat or letgui? stl2dat is a command line tool, expecting command line parameters. If it has no parameters, it (very) briefly pops up a help screen and closes. To use it you should open a command line prompt, then type in the command with its parameters. If the problem is with LETGUI... I don't know. Do you have .NET installed?

I installed stl2dat

RE: Part 71981,6182721,6073604,2214…… - Philippe Hurbain - 2017-06-07

(2017-06-07, 9:00)yongxu wang Wrote: I installed stl2dat

Then you must use a command line prompt. But it you are not comfortable with this, install LETGUI instead!
[url=https://www.lifewire.com/how-to-open-command-prompt-2618089][/url]

Quote:Don't forget to model using LDUs rather than mm or inches.

Note: 1ldu = 0.4mm