Complete Small Sail


Small Sail
#1
Hi there.
Are there someone who can make this, or are working on this type of sailing?

sailbb30 sailbb19 sailbb26


The pattern has is not important at this stage, for my used
Reply
RE: Small Sail
#2
I'd also like to make request for these sails for creating OMR sets 6057, 6261 and 6277.
The part number is u767 and they are three existing print variants.
sailbb19 -> u767p40
sailbb26 -> u767p30
sailbb30 -> u767p31
http://peeron.com/inv/parts/x767px1

Plain part (flat and formed) is sufficient, as I will try to do patterning them by myself.
Reply
RE: Small Sail
#3
(2022-08-13, 14:07)Takeshi Takahashi Wrote: I'd also like to make request for these sails for creating OMR sets 6057, 6261 and 6277.
The part number is u767 and they are three existing print variants.
sailbb19 -> u767p40
sailbb26 -> u767p30
sailbb30 -> u767p31
http://peeron.com/inv/parts/x767px1

Plain part (flat and formed) is sufficient, as I will try to do patterning them by myself.
Blank flat version is done, https://www.ldraw.org/cgi-bin/ptdetail.c...s/u767.dat
Also attached an undistorted image of px1 for patterning Wink


Attached Files Thumbnail(s)
   
Reply
RE: Small Sail
#4
First formed shape now on PT:

https://www.ldraw.org/cgi-bin/ptdetail.c...767c01.dat
Reply
RE: Small Sail
#5
(2022-10-17, 9:46)Philippe Hurbain Wrote: First formed shape now on PT:

https://www.ldraw.org/cgi-bin/ptdetail.c...767c01.dat

Thanks very much!!
Fit check is here: https://forums.ldraw.org/thread-26632-po...l#pid47349

I think the sail surface is clearing the stud of 4733, so the stud edge should be a rendering error.

I'll make the print after the requested part 3068bpb2007 completed.


Attached Files Thumbnail(s)
   
Reply
RE: Small Sail
#6
First flat print is done!!
https://www.ldraw.org/cgi-bin/ptdetail.c...767p01.dat

Now started this formed part
Reply
RE: Small Sail
#7
(2022-10-19, 14:49)Takeshi Takahashi Wrote: Now started this formed part

Good luck 😁
Reply
RE: Small Sail
#8
A new shape...

https://www.ldraw.org/cgi-bin/ptdetail.c...767c02.dat
Reply
RE: Small Sail
#9
Third and last shape on PT!

https://www.ldraw.org/cgi-bin/ptdetail.c...767c03.dat
Reply
RE: Small Sail
#10
(2022-10-30, 15:33)Philippe Hurbain Wrote: Third and last shape on PT!

https://www.ldraw.org/cgi-bin/ptdetail.c...767c03.dat

Thanks very much!! I'll check them.
Reply
RE: Small Sail
#11
Finally the first printed sail has been done!!
https://www.ldraw.org/cgi-bin/ptdetail.c...p01c01.dat

   
Reply
RE: Small Sail
#12
That part is amazing! Well done.
Reply
RE: Small Sail
#13
Fit check for set 6261 is OK!!
Thanks, I'll start creating print.

   
Reply
RE: Small Sail
#14
(2022-12-12, 11:40)Takeshi Takahashi Wrote: Fit check for set 6261 is OK!!
Thanks, I'll start creating print.

The second print is done!!
https://www.ldraw.org/cgi-bin/ptdetail.c...p02c02.dat

   
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)