LDraw.org Discussion Forums
[Complete] Small Sail - Printable Version

+- LDraw.org Discussion Forums (https://forums.ldraw.org)
+-- Forum: Models and Parts (https://forums.ldraw.org/forum-18.html)
+--- Forum: Part Requests (https://forums.ldraw.org/forum-30.html)
+--- Thread: [Complete] Small Sail (/thread-18775.html)

Small Sail - Christian Maglekær - 2016-01-15

Hi there.
Are there someone who can make this, or are working on this type of sailing?

sailbb30 sailbb19 sailbb26


The pattern has is not important at this stage, for my used

RE: Small Sail - Takeshi Takahashi - 2022-08-13

I'd also like to make request for these sails for creating OMR sets 6057, 6261 and 6277.
The part number is u767 and they are three existing print variants.
sailbb19 -> u767p40
sailbb26 -> u767p30
sailbb30 -> u767p31
http://peeron.com/inv/parts/x767px1

Plain part (flat and formed) is sufficient, as I will try to do patterning them by myself.

RE: Small Sail - Philippe Hurbain - 2022-10-12

(2022-08-13, 14:07)Takeshi Takahashi Wrote: I'd also like to make request for these sails for creating OMR sets 6057, 6261 and 6277.
The part number is u767 and they are three existing print variants.
sailbb19 -> u767p40
sailbb26 -> u767p30
sailbb30 -> u767p31
http://peeron.com/inv/parts/x767px1

Plain part (flat and formed) is sufficient, as I will try to do patterning them by myself.
Blank flat version is done, https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/u767.dat
Also attached an undistorted image of px1 for patterning Wink

RE: Small Sail - Philippe Hurbain - 2022-10-17

First formed shape now on PT:

https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/u767c01.dat

RE: Small Sail - Takeshi Takahashi - 2022-10-17

(2022-10-17, 9:46)Philippe Hurbain Wrote: First formed shape now on PT:

https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/u767c01.dat

Thanks very much!!
Fit check is here: https://forums.ldraw.org/thread-26632-post-47349.html#pid47349

I think the sail surface is clearing the stud of 4733, so the stud edge should be a rendering error.

I'll make the print after the requested part 3068bpb2007 completed.

RE: Small Sail - Takeshi Takahashi - 2022-10-19

First flat print is done!!
https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/u767p01.dat

Now started this formed part

RE: Small Sail - Philippe Hurbain - 2022-10-19

(2022-10-19, 14:49)Takeshi Takahashi Wrote: Now started this formed part

Good luck 😁

RE: Small Sail - Philippe Hurbain - 2022-10-26

A new shape...

https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/u767c02.dat

RE: Small Sail - Philippe Hurbain - 2022-10-30

Third and last shape on PT!

https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/u767c03.dat

RE: Small Sail - Takeshi Takahashi - 2022-10-31

(2022-10-30, 15:33)Philippe Hurbain Wrote: Third and last shape on PT!

https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/u767c03.dat

Thanks very much!! I'll check them.

RE: Small Sail - Takeshi Takahashi - 2022-12-11

Finally the first printed sail has been done!!
https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/u767p01c01.dat

   

RE: Small Sail - Orion Pobursky - 2022-12-11

That part is amazing! Well done.

RE: Small Sail - Takeshi Takahashi - 2022-12-12

Fit check for set 6261 is OK!!
Thanks, I'll start creating print.

   

RE: Small Sail - Takeshi Takahashi - 2022-12-24

(2022-12-12, 11:40)Takeshi Takahashi Wrote: Fit check for set 6261 is OK!!
Thanks, I'll start creating print.

The second print is done!!
https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/u767p02c02.dat