Parts we are Working on - Part Deux

[Philippe Hurbain]

It is a nice challenge for Pathtruder Always fun to tweak the start and end shapes.

 Useful tool, but sooo tricky...

[N. W. Perry]

I'm just going to give a little bump to the Model Team type 1 rim that I started. It's still a "part I am working on" and I still "anticipate reworking it some", but it may be a while, and if anyone else wanted to have a look over it in the meantime, that would be fine, too.

[Gerald Lasser]

I uploaded some of them already and now adding finishing touches to the missing ones. THe only one not pictured here is the 65146, the turntable-clip to fasten the strap with the new rounded bricks.

I notices that on all the product pictures the strap is shown with the dents hidden, am I the only one who thinks they should be shown?

The transparent lid of the box shows somehow the need for some surface properties, the window is clear, the sides are rough.

   

[Gerald Lasser]

I am working on the rear mudguard of the Porsche.

If anybody has details on the slope (which I loosely modeled after the 1 x 10 Curved slope) I apprechiate a hi res scan or orthogonal picture!

It is a nice challenge for Pathtruder Always fun to tweak the start and end shapes.

Ulrich uploaded it already. so I compared both. Amazing similar curvature :-)

What did you use to get it Ulrich? Pathtruder?
   

[Ulrich Röder]

Ulrich uploaded it already. so I compared both. Amazing similar curvature :-)

What did you use to get it Ulrich? Pathtruder?

no ... I have an older student version of Cinema 4D available .... It's fantastic how everything goes from hand to hand.
Via conversion stl or a plugin for complete parts also in all colors (the last mentioned unfortunately ONLY for import).

The mesh control function is more than ingenious ... color-coded ...
for all matters (unfortunately except for lines type 2 and 5)

After converting back to dat ... handwork is the order of the day to bring in our primitives as much as possible.

I took over the longitudinal division of the Z axis from a part of Paul Easter ... Set all points of the Z axis bend to zero
... (certified in the year of the Lord 2013) ....

... the x-axis via the rounding of the hires version of 37352, dat
... our "spaghetti" is simple on the round nose.

Cinema 4D has a dimension function for paths ... so you can simply mark all points and put them on a previously measured diagonal line path ...

More than just desirable to have such a function in LDPE!

a "frame" of polygons created by hand .... the rest can be done with a click on "autofill" ...

something else great for LDPE ..... autofill





BTW:
Please call me Uli ..... Ulrich is only for potential enemies and the tax office .... but well .... that's almost the same ...

[Philippe Hurbain]

And with this wonderful tool, could you easily reduce resolution? I really, really don't like current excessive resolution. And as I said previously it must match 6191...

[Magnus Forsberg]

it must match 6191...

   

[Philippe Hurbain]

If nobody started to work on 36452 I'll do it soon!
https://www.bricklink.com/v2/catalog/cat...2#T=C&C=11

[Magnus Forsberg]

There's now a little red Corvette on my desk, and I can start working on the new Speed Champions dual moulded wheels.

[Magnus Forsberg]

... and now I really need to start with the wheels ...

   

[Gerald Lasser]

There's now a little red Corvette on my desk, and I can start working on the new Speed Champions dual moulded wheels.

Dual Moulded Speed Champion wheels? Did not expect such a thing in this series.
I got one of those Mickey Sets, there are also dual molded wheels in there... Not really a fan of this

[Willy Tschager]

I did it!

   

https://www.ldraw.org/cgi-bin/ptdetail.c.../30131.dat

It took some time 'til I figured out the most convenient way to do the outside wall after finding out that the LDD data was of no use.

w.

[Magnus Forsberg]

It was so close. It doesn't look right. The brake disc looks too small.

   

[Magnus Forsberg]

Done!

   

4740p04
72206
72206p01
72210a
72210b

[Philippe Hurbain]

Wow!

[Attila Gallik]

Done!



4740p04
72206
72206p01
72210a
72210b

Looking really great!

[Magnus Forsberg]

I'm working on the wings for the LOTR eagle 11467

I have the wings ready, 11777 and 11778, but there seams to be a mix-up between left and right at Bricklink and in LDD.
Brickset have only the design numbers, not the part number.
11777 = is right wing at Bricklink, but is left wing in LDD, but the name in LDD is "Eagle Wing Right". Very confusing.

Anyone have the wings and could check the numbers?

   

[Gerald Lasser]

Here you see the right wing number, looks like 11777

https://www.flickr.com/photos/brothers-b...767701671/


   

[Philippe Hurbain]

Don't forget that the left wing is on the right when you look at the minifig face to face   (and that right hand is the one with the thumb on the left!). More seriously, nothing to offer here...

[Gerald Lasser]

Working on the new sperical 5 x 5 x 3.333 Quarter Dome


   

[Gerald Lasser]

Working on 66599

   

DONE, on PT
https://www.ldraw.org/cgi-bin/ptdetail.cgi?s=66955

[Gerald Lasser]

Working on the new Brick 4 x 4 x 1 Round (Part 79850) which comes with the Harry Potter Stuff.

Part is ready, but needs cleanup in the structure, render looks nice!
   

On the PT!

[Gerald Lasser]

Waiting for a number for those two versatile guys:
       

[Magnus Forsberg]

Waiting for a number for those two versatile guys:

My version looks like this.

   

Have you seen any photos of the top side?

[Gerald Lasser]

My version looks like this.



Have you seen any photos of the top side?

Here in the review:

https://ramblingbrick.com/2021/12/02/800...iques/amp/

[Travis Cobbs]

Here in the review:

https://ramblingbrick.com/2021/12/02/800...iques/amp/

It may not be obvious, but most of the images in the article are 1200x900 resolution, even when they are shown much smaller inline in the article. If you right click on them and open in a new tab, you get a much better look.

[Philippe Hurbain]

I got photos of 42130 parts, so I'll start working on them... But if someone wants to do some parts, feel free - considering the amount of work there's room for many parts authors  . Just post a message here to avoid double work!

[Gerald Lasser]

I got photos of 42130 parts, so I'll start working on them... But if someone wants to do some parts, feel free - considering the amount of work there's room for many parts authors  . Just post a message here to avoid double work!

I just had all look through some of the new friends sets, they come with plenty of new designs as well... Puh

[Willy Tschager]

Fixing: https://www.ldraw.org/cgi-bin/ptdetail.c.../23321.dat Done!



But this is a beast.

[Philippe Hurbain]

Working on the new chest lid 80835 (2022 HP sets) Done: https://www.ldraw.org/cgi-bin/ptdetail.c.../80835.dat

[Willy Tschager]

Fixing:

Belville Crown Small (Needs work)
https://www.ldraw.org/cgi-bin/ptdetail.c.../72514.dat Done!



w.

[Magnus Forsberg]

Found a way to reduce the mesh, so I did that.

   

[Willy Tschager]

Fixing Electric  4.5V Battery Box  7 x 11 x  3 Type 2 (Complete)


[img] https://www.ldraw.org/library/unofficial...593c01.png[/img]


https://www.ldraw.org/cgi-bin/ptdetail.c...593c01.dat

[Willy Tschager]

Fixing:

https://www.ldraw.org/cgi-bin/ptdetail.c.../51663.dat



w.

[Takeshi Takahashi]

I'm now creating part 6092px2 in set 6416

https://www.bricklink.com/v2/catalog/cat...8#T=C&C=38
https://rebrickable.com/parts/6092pr0003...ool-print/

Good resolution images for reference (especially back, left and right side) are highly appreciated.

[Philippe Hurbain]

I'm now creating part 6092px2 in set 6416

https://www.bricklink.com/v2/catalog/cat...8#T=C&C=38
https://rebrickable.com/parts/6092pr0003...ool-print/

Good resolution images for reference (especially back, left and right side) are highly appreciated.

Far from perfect, but this video shows the set from all angles and is good quality/resolution.
https://youtu.be/HcECpv1UxGw
Good luck 😁

[Takeshi Takahashi]

Far from perfect, but this video shows the set from all angles and is good quality/resolution.
https://youtu.be/HcECpv1UxGw
Good luck 😁

Thanks for the video and the pool has been done!
Now I'm creating the pavement... not so technically challenging except surface stitch but there are hundreds of stones to be painted on every direction.
   

[Magnus Forsberg]

Working on the DB5 windscreen. Partnumber 1874

   

Don't know if this works ....

[Magnus Forsberg]

Done.



https://www.ldraw.org/cgi-bin/ptdetail.c...874p01.dat