[Complete] Part Request

[Merlijn Wissink]

Hi,

I was wondering if anyone would like to make part 64699? Of course in unfolded state.


Thanks in advance
Merlijn / legolijntje

[Philippe Hurbain]

This should not be utterly difficult, but... I don't have the part!

[Merlijn Wissink]

I actually thought someone was going to say "that's a diffcult part...", because of all the clips, holes and thin parts...

Anyway, I can make some pictures if you want. Or measure some things. What exactly do you need?

[Philippe Hurbain]

I don't promise anything yet... but a good scan of the flattened part from both sides plus a photo or two of the folded thing would allow me to make my mind!

[Merlijn Wissink]

I've made some photo's. Unfortunatly the scanner is broken, so I wasn't able to make any scans...
You can view the pictures here. I've also included a picture of the lid, although it's a bit useless (the pictures and the part itself).
If you need any other pics or measurements, just ask.

I hope you can make something, but I also do understand if you decide to not make it.

[Philippe Hurbain]

OK, seems clear...
A few dimensions now:
- Overall width?
- Road width?
- Overall length of narrow sections?
- Thickness of plastic?
- Are these regular pegholes? can you fit Technic pins?
- Height of side bumps?
- Stud distance between pegholes rows across road? Between successive groups?
- Decorations are stickers, right?

(Edit) a close-up photo of the bottom would be appreciated!

[Merlijn Wissink]

Oh, yea, I forgot to mention that the decals are stickers, so you don't have to include them. The holes are normal pin-holes and you can fit a pin, axle, hose or whatever in there. I will measure everythingthing tomorrow

Btw, if you want to make a really detailed version of the part, you have to include 2 engraved LEGO logos on the back... But that's not necesary for the part usage, so the choice is your.

[Magnus Forsberg]

Hi, maybe this could help?

I made a crude mock-up of this part some years ago.
I'ts not very good but I hope that at least the dimensions are right.

It's made in MLCad Baseplate Generator and opens with studs in MLCad, but without studs in LDView.

Use it or loose it...;-)

[Michael Heidemann]

Yes, that seems to me to be ok for the dimensions.
I should have one of that series in my collection , so I have to dig out that set to verify the dimensions and to be a helping hand here

[Michael Heidemann]

The Logos are engraved, but mainly because the logo is complete high finish surface (like the bricks) whereas the normal backside is "stoned". I think that is difficult to "build" in Ldraw. A pattern with different materials should work better IMHO.
But I am also think that this is not necessary.

[Merlijn Wissink]

I've measured some things. You can view it here and you need to use it together with this picture. I've also added a few pictures of the bottom at the page I've linked in a previous post.
If you need any more info, just ask

[Philippe Hurbain]

Great, thanks all!
Hopefully I should be able to start this in a few days.

[Santeri Piippo]

I actually have this part around, let me try dig it...

[Lili max]

I was wondering if any of Tetrix mindstorms parts are made for Ldraw?

[Philippe Hurbain]

Edited - Sorry, I mixed names!
Matrix LDraw parts should be made available on Matrix Robotics some time in the future... But nothing yet. And there is no plans for Tetrix parts...

[Philippe Hurbain]

First subpart... http://www.ldraw.org/cgi-bin/ptdetail.cg...501s01.dat

[Merlijn Wissink]

That looks great so far!
Thanks already for the subpart.

[Philippe Hurbain]

I just posted the second section... http://www.ldraw.org/cgi-bin/ptdetail.cg...501s02.dat

[Merlijn Wissink]

I just saw your issue with the part number. I never saw it. It's strange indeed that my version has a different part number than the one on Bricklink...

Well, after I wrote the above, I decided to take a look at it again. It has the followings things written on it:
- 64699/001 01
- 86501

Briclink used the first number, but what is the first and what is the second number? Any ideas?

[Philippe Hurbain]

I don't know what is the first number, but I am completely sure that the correct part number is 86501, item number 4550694...

[Michael Heidemann]

I can confirm your data. Mine is from set 8124.

[Philippe Hurbain]

...and now the part! http://www.ldraw.org/cgi-bin/ptdetail.cg.../86501.dat

[Michael Heidemann]

Awaresome work as usually

[Merlijn Wissink]

Thanks a lot for all your work, Phillipe!