Working on part 22390...
Parts we are working on
(2017-02-23, 7:44)Philippe Hurbain Wrote: Currently working on 27255......done http://www.ldraw.org/cgi-bin/ptdetail.cg.../27255.dat
Attached connectivity files for LDCad.
Starting cleaning of LDD 23448.
Done http://www.ldraw.org/cgi-bin/ptdetail.cg.../23448.dat
Done http://www.ldraw.org/cgi-bin/ptdetail.cg.../23448.dat
RE: Parts we are working on
2018-02-26, 9:29 (This post was last modified: 2018-02-26, 10:22 by Philippe Hurbain.)
2018-02-26, 9:29 (This post was last modified: 2018-02-26, 10:22 by Philippe Hurbain.)
Getting a look at 27259... Much faster than expscted... done http://www.ldraw.org/cgi-bin/ptdetail.cg.../27259.dat
RE: Parts we are working on
2018-03-16, 21:12 (This post was last modified: 2018-03-20, 19:30 by Johann Eisner.)
2018-03-16, 21:12 (This post was last modified: 2018-03-20, 19:30 by Johann Eisner.)
If nothing goes right, go left.
RE: Parts we are working on
2018-03-16, 21:27 (This post was last modified: 2018-03-20, 20:02 by Willy Tschager.)
2018-03-16, 21:27 (This post was last modified: 2018-03-20, 20:02 by Willy Tschager.)
Tile 2 x 2 with Map Street Level with Red 'X' Pattern
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...68bp76.dat
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...68bp76.dat
LEGO ergo sum
RE: Parts we are working on
2018-03-20, 19:35 (This post was last modified: 2018-03-25, 20:00 by Johann Eisner.)
2018-03-20, 19:35 (This post was last modified: 2018-03-25, 20:00 by Johann Eisner.)
Starting....https://www.bricklink.com/v2/catalog/catalogitem.page?P=3068bpb0974&name=Tile%202%20x%202%20with%20%27POLICE%27%20on%20Badge%20Pattern%20(10720)&category=%5BTile,%20Decorated%5D#T=C&C=1
Tile 2 x 2 with 'POLICE' on Badge Pattern
Done.... http://www.ldraw.org/cgi-bin/ptdetail.cg...68bp0e.dat
Tile 2 x 2 with 'POLICE' on Badge Pattern
Done.... http://www.ldraw.org/cgi-bin/ptdetail.cg...68bp0e.dat
If nothing goes right, go left.
RE: Parts we are working on
2018-03-25, 20:03 (This post was last modified: 2018-04-01, 7:46 by Johann Eisner.)
2018-03-25, 20:03 (This post was last modified: 2018-04-01, 7:46 by Johann Eisner.)
Starting Nex Knight Shield... https://www.bricklink.com/v2/catalog/cat...?id=142986
Done.... http://www.ldraw.org/cgi-bin/ptdetail.cg...385pe2.dat
Done.... http://www.ldraw.org/cgi-bin/ptdetail.cg...385pe2.dat
If nothing goes right, go left.
RE: Parts we are working on
2018-03-31, 19:32 (This post was last modified: 2018-03-31, 19:39 by Santeri Piippo.)
2018-03-31, 19:32 (This post was last modified: 2018-03-31, 19:39 by Santeri Piippo.)
Starting 54389: Electric Constraction Eyes 4.5 x 1.6 x 1.3
I tried to replace its battery, which requires disassembling it. Now it doesn't work anymore because I had replaced the 3V battery with a 1.55V one... so now that it's in pieces, I might as well model it.
I tried to replace its battery, which requires disassembling it. Now it doesn't work anymore because I had replaced the 3V battery with a 1.55V one... so now that it's in pieces, I might as well model it.
I intend to have a look at the new Unikitty part shapes:
https://brickset.com/parts/design-35470
https://brickset.com/parts/design-35463
https://brickset.com/parts/design-35459
https://brickset.com/parts/design-35470
https://brickset.com/parts/design-35463
https://brickset.com/parts/design-35459
(2018-06-04, 16:51)Philippe Hurbain Wrote: I intend to have a look at the new Unikitty part shapes:
https://brickset.com/parts/design-35470
https://brickset.com/parts/design-35463
https://brickset.com/parts/design-35459
Do you have the parts already? I am trying to get 35463 and 35459 today, I am not sure if the collectible bags are already in the store
(2018-06-05, 6:48)Gerald Lasser Wrote:Yes I do, bought one yesterday. Was available in Paris store. Also had a close look at steep straight roller coaster slope!(2018-06-04, 16:51)Philippe Hurbain Wrote: I intend to have a look at the new Unikitty part shapes:
https://brickset.com/parts/design-35470
https://brickset.com/parts/design-35463
https://brickset.com/parts/design-35459
Do you have the parts already? I am trying to get 35463 and 35459 today, I am not sure if the collectible bags are already in the store
(2018-06-05, 7:00)Philippe Hurbain Wrote:(2018-06-05, 6:48)Gerald Lasser Wrote: Do you have the parts already? I am trying to get 35463 and 35459 today, I am not sure if the collectible bags are already in the storeYes I do, bought one yesterday. Was available in Paris store. Also had a close look at steep straight roller coaster slope!
OK, great! The steep slope should be pretty similar to the relevant s-slope parts, isnt't it?
(2018-06-05, 12:37)Gerald Lasser Wrote:Yes it is. A mix of lower part of http://www.ldraw.org/cgi-bin/ptdetail.cg.../26560.dat and upper part of http://www.ldraw.org/cgi-bin/ptdetail.cg.../26559.dat ... Maybe I'll do more subparting.(2018-06-05, 7:00)Philippe Hurbain Wrote: Yes I do, bought one yesterday. Was available in Paris store. Also had a close look at steep straight roller coaster slope!
OK, great! The steep slope should be pretty similar to the relevant s-slope parts, isnt't it?
(2018-06-05, 15:04)Philippe Hurbain Wrote:(2018-06-05, 12:37)Gerald Lasser Wrote: OK, great! The steep slope should be pretty similar to the relevant s-slope parts, isnt't it?Yes it is. A mix of lower part of http://www.ldraw.org/cgi-bin/ptdetail.cg.../26560.dat and upper part of http://www.ldraw.org/cgi-bin/ptdetail.cg.../26559.dat ... Maybe I'll do more subparting.
I could do some pictures of the parts in the store today, they still had and "glueless" demo behind the counter :-)
RE: Parts we are working on
2018-06-18, 15:52 (This post was last modified: 2018-09-11, 6:25 by Willy Tschager.)
2018-06-18, 15:52 (This post was last modified: 2018-09-11, 6:25 by Willy Tschager.)
Working on:
60603pb004 - Glass for Window 1 x 4 x 3 - Opening with 'ACE BRICKMAN PRIVATE DETECTIVE' Pattern
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...210p01.dat
60603pb004 - Glass for Window 1 x 4 x 3 - Opening with 'ACE BRICKMAN PRIVATE DETECTIVE' Pattern
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...210p01.dat
LEGO ergo sum
(2018-08-06, 15:40)Magnus Forsberg Wrote: I'm working on all the Powerpuff Girls
Good luck!
(2018-08-06, 15:40)Magnus Forsberg Wrote: Is there a way to figure out the correct partnumber of their different hair pieces?
They use the same part (31512), with different print, as face, and Brickset only have the assembly numbers of the complete heads.
How about the LAN through Max our Ambassador?
w.
LEGO ergo sum
RE: Parts we are working on
2018-08-24, 14:07 (This post was last modified: 2018-08-24, 19:01 by Ulrich Röder.)
2018-08-24, 14:07 (This post was last modified: 2018-08-24, 19:01 by Ulrich Röder.)
working on Stickers of Model Team Sets .....
5590-1 Whirl N' Wheel Super Truck
5591-1 Mach II Red Bird Rig / Mach II Red Bird
5590-1 Whirl N' Wheel Super Truck
5591-1 Mach II Red Bird Rig / Mach II Red Bird
(2018-08-24, 19:31)Ulrich Röder Wrote: working on Stickers of Model Team Sets .....
5590-1 Whirl N' Wheel Super Truck
5591-1 Mach II Red Bird Rig / Mach II Red Bird
Hello Ulrich.
I've had a look at all your new sticker at the Part Tracker.
Please read and follow the official Sticker specifications found here.
As far as a I can see non of your stickers or part shortcuts follow the naming nomenclature.
All files need a renumbering and corrected descriptions. Please send a mail to PT Admin and ask for help.
(2018-08-25, 12:23)Magnus Forsberg Wrote:(2018-08-24, 19:31)Ulrich Röder Wrote: working on Stickers of Model Team Sets .....
5590-1 Whirl N' Wheel Super Truck
5591-1 Mach II Red Bird Rig / Mach II Red Bird
Hello Ulrich.
I've had a look at all your new sticker at the Part Tracker.
Please read and follow the official Sticker specifications found here.
As far as a I can see non of your stickers or part shortcuts follow the naming nomenclature.
All files need a renumbering and corrected descriptions. Please send a mail to PT Admin and ask for help.
I have straightened out the naming and sent Ulrich a private message.
Chris (LDraw Parts Library Admin)
Working on the new version of Pneumatic 6L pump...
https://www.bricklink.com/v2/catalog/cat...=7#T=C&C=7
https://www.bricklink.com/v2/catalog/cat...=7#T=C&C=7
(2018-08-24, 19:31)Ulrich Röder Wrote: working on Stickers of Model Team Sets .....
5590-1 Whirl N' Wheel Super Truck
5591-1 Mach II Red Bird Rig / Mach II Red Bird
complete and ready....so far..
...working on <-<-<-<--- Lied! ...( ... it is ready .... for your merciless review )....42013 Belville Ice Skate
Ice Skate
also ready....24077 Minifig Crutch
Clumsy Guy
Ice Skate
also ready....24077 Minifig Crutch
Clumsy Guy
RE: Parts we are working on
2018-09-10, 19:01 (This post was last modified: 2018-09-10, 19:12 by Gerald Lasser.)
2018-09-10, 19:01 (This post was last modified: 2018-09-10, 19:12 by Gerald Lasser.)
(2018-09-02, 13:54)Willy Tschager Wrote: Watto:
For the patterned version I would need some high resolution photos from all sides + two-thirds from left and right for reference. I found some pics on the net but not greater than 1600 x 1600 which is not enough.
w.
Teaser! I got an original packed one :-)
I will upload a few shots, but I do not have proper lighting currently.
Here's the link:
https://www.dropbox.com/sh/l0iqwlv5do7e8...YmPLa?dl=0
....working on 6241717 Decorative Gothic Glass
http://www.newelementary.com/2018/08/leg...astle.html
[/url]
[url=http://www.newelementary.com/2018/08/lego-harry-potter-71403-hogwarts-castle.html]
RE: Parts we are working on
2018-09-11, 2:51 (This post was last modified: 2018-09-26, 11:37 by Ulrich Röder.)
2018-09-11, 2:51 (This post was last modified: 2018-09-26, 11:37 by Ulrich Röder.)
[url=http://www.newelementary.com/2018/08/lego-harry-potter-71403-hogwarts-castle.html][/url]
6241717 Decorative Gothic Glass...is ready....renaming by admin will follow
6241717 Decorative Gothic Glass...is ready....renaming by admin will follow
This was a tough one. It took me three attempts to finally tackle it an I worked more than 3 months on it. Getting a part like this ready without LDPE is almost impossible - I'm glad we have such a tool.
Minifig Head Toydarian - http://www.ldraw.org/cgi-bin/ptdetail.cg.../92759.dat
Minifig Head Toydarian with Watto Vest and Belt Pattern - http://www.ldraw.org/cgi-bin/ptdetail.cg...759p01.dat
w.
Minifig Head Toydarian - http://www.ldraw.org/cgi-bin/ptdetail.cg.../92759.dat
Minifig Head Toydarian with Watto Vest and Belt Pattern - http://www.ldraw.org/cgi-bin/ptdetail.cg...759p01.dat
w.
LEGO ergo sum
RE: Parts we are working on
2018-11-28, 15:43 (This post was last modified: 2019-01-12, 15:05 by Willy Tschager.)
2018-11-28, 15:43 (This post was last modified: 2019-01-12, 15:05 by Willy Tschager.)
Working on:
Minifig Torso White Vertical Stripes and Red Bow Tie Pattern
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...973p7i.dat
Minifig Torso Police Female Shirt with Gold Badge, Pocket and Black Tie Pattern
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...973p7l.dat
w.
Minifig Torso White Vertical Stripes and Red Bow Tie Pattern
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...973p7i.dat
Minifig Torso Police Female Shirt with Gold Badge, Pocket and Black Tie Pattern
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...973p7l.dat
w.
LEGO ergo sum
RE: Parts we are working on
2019-01-10, 22:25 (This post was last modified: 2019-01-13, 20:52 by Magnus Forsberg.)
2019-01-10, 22:25 (This post was last modified: 2019-01-13, 20:52 by Magnus Forsberg.)
I'm working on the new mudguard to the '67 Mini Cooper.
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg.../49097.dat
Done: http://www.ldraw.org/cgi-bin/ptdetail.cg.../49097.dat
As you may have noticed on PT I'm working on plate gears. I already completed the 14t one (http://www.ldraw.org/cgi-bin/ptdetail.cg.../35446.dat) and I'm working on the 6t. But I miss a photo of the bottom of the 10t one. Anybody got it?
« Next Oldest | Next Newest »
Users browsing this thread: 2 Guest(s)