Shorter 8mm CV joint from set 42160


Shorter 8mm CV joint from set 42160
#1
Hi,

I would like to submit a new part.

I think It looks fine in LDCAD and I don't see any problems but have posted it here just to double check.

I am waiting for sariel or kbalage (RacingBrick) to give me the proper part ID's, according to the sets inventory it has the element ID of 4447240. Here is the LDRAW script:

Code:
0 Technic Steering Constant Velocity 8mm Joint Female With 2L Axle
0 Name: 4447240.dat
0 Author: SNIPE [SNIPE]
0 !LDRAW_ORG Part UPDATE 2020-02
0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !KEYWORDS CV

0 !LDCAD SNAP_CYL [gender=M] [caps=none]

1 16 0 0 -10 6.75 0 0 0 0 6.75 0 1 0 4-4ring1.dat

1 16 0 0 -20 1 0 0 0 0 -1 0 1 0 axlehol3.dat
1 16 0 0 -20 1 0 0 0 0 -1 0 1 0 axlehol9.dat
1 16 0 0 -20 1 0 0 0 0 -1 0 1 0 axleho10.dat
1 16 0 0 -50 1 0 0 0 0 -1 0 30 0 axlehol8.dat
1 16 0 0 -50 1 0 0 0 0 -1 0 1 0 axlehol2.dat

1 16 0 0 -50 1 0 0 0 0 -1 0 1 0 axleend.dat

1 16 0 0 -12 6 0 0 0 0 -6 0 -7 0 4-4edge.dat

1 16 0 0 -15 1 0 0 0 0 1 0 3 0 4-4con5.dat

0 BFC INVERTNEXT
1 16 0 0 -10.6 3 0 0 0 0 3 0 1 0 4-4cylc.dat

1 16 0 0 -12 8 0 0 0 0 8 0 2 0 4-4cylc.dat
1 16 0 0 -15 6 0 0 0 0 6 0 -5 0 4-4cyli.dat
1 16 0 0 -15 6 0 0 0 0 6 0 -1 0 4-4edge.dat
1 16 0 0 -15 1 0 0 0 0 1 0 3 0 4-4con5.dat
1 16 0 0 -12 5 0 0 0 0 5 0 -1 0 4-4edge.dat

1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\52730s01.dat
1 16 0 0 0 -1 0 0 0 1 0 0 0 1 s\52730s01.dat
1 16 0 0 0 1 0 0 0 -1 0 0 0 1 s\52730s01.dat
1 16 0 0 0 -1 0 0 0 -1 0 0 0 1 s\52730s01.dat
 I don't have submit priveleges yet so maybe someone can submit it for me?


Attached Files
.dat   4447240.dat (Size: 1.18 KB / Downloads: 11)
Reply
RE: Shorter 8mm CV joint from set 42160
#2
(2023-07-06, 19:35)SNIPE Wrote: I am waiting for sariel or kbalage (RacingBrick) to give me the proper part ID's, according to the sets inventory it has the element ID of 4447240.

It really looks like 52730 which is already in the library: https://library.ldraw.org/official/9999
Reply
RE: Shorter 8mm CV joint from set 42160
#3
(2023-07-10, 11:08)Vincent Messenet Wrote: It really looks like 52730 which is already in the library: https://library.ldraw.org/official/9999

It is similar, but 1L shorter where the axle is. So its a new part that premiered in set 42160
Reply
RE: Shorter 8mm CV joint from set 42160
#4
(2023-07-10, 16:01)SNIPE Wrote: It is similar, but 1L shorter where the axle is. So its a new part that premiered in set 42160

OK that's why we cannot find its design ID yet. It's better to wait for it before uploading the part on PT. In the meantime have you applied to become an author as described here
https://www.ldraw.org/ptfaq.html?
Reply
RE: Shorter 8mm CV joint from set 42160
#5
What happens with this part in progs that don't support LDCad metas, such as LeoCAD or MLCad?

IMHO this won't make it through the PT.

w.
LEGO ergo sum
Reply
RE: Shorter 8mm CV joint from set 42160
#6
(2023-07-10, 19:08)Willy Tschager Wrote: What happens with this part in progs that don't support LDCad metas, such as LeoCAD or MLCad?

IMHO this won't make it through the PT.

w.

I got the part ID now, its 4192. Someone who got the set early gave me it on eurobricks.

I'm not good enough to understand about MLCAD and LEOCAD metas etc, I made this part by just modifying a copy of the file of the longer variant of this part.

I'll check the link shortly.
Reply
RE: Shorter 8mm CV joint from set 42160
#7
(2023-07-11, 19:51)SNIPE Wrote: I'm not good enough to understand about MLCAD and LEOCAD metas etc, I made this part by just modifying a copy of the file of the longer variant of this part.

Willy was refering to the line 0 !LDCAD SNAP_CYL [gender=M] [caps=none]
This is a meta command specific to LDCAD to add connectivity info. It is not supported by other CAD programs so it must be removed before uploading the part on LDraw's PT
Reply
RE: Shorter 8mm CV joint from set 42160
#8
(2023-07-12, 6:17)Vincent Messenet Wrote: Willy was refering to the line 0 !LDCAD SNAP_CYL [gender=M] [caps=none]
This is a meta command specific to LDCAD to add connectivity info. It is not supported by other CAD programs so it must be removed before uploading the part on LDraw's PT

Ah ok, done:


Attached Files
.dat   4192.dat (Size: 1.13 KB / Downloads: 4)
Reply
RE: Shorter 8mm CV joint from set 42160
#9
Hello; I have few questions: it's safe to submite a part that it is not been released yet?. Also, regarding to part 52730: I checked the Lego Builder App and it have a diferent number 46841 so: is this number an alias of these part, it's a totally diferent part, or is a wrong number on the app?
the info from the part reads: "Name": "CARDAN CUP W/ CROSS AXLE, NO. 2", curious isn't?
Reply
RE: Shorter 8mm CV joint from set 42160
#10
(2023-07-12, 23:17)Javier Orquera Wrote: Hello; I have few questions: it's safe to submite a part that it is not been released yet?. Also, regarding to part 52730: I checked the Lego Builder App and it have a diferent number 46841 so: is this number an alias of these part, it's a totally diferent part, or is a wrong number on the app?
the info from the part reads: "Name": "CARDAN CUP W/ CROSS AXLE, NO. 2", curious isn't?
52760 is the correct part ID , this is the CV joint with a 3L axle, where as the part I'm talking about has a 2L axle and is light bluish gray rather than dark bluish gray, it came out in set 42160.

Google doesn't give any results for '46841'.

Yes, parts that are not yet released sometimes do get released on the unofficial parts library.
Reply
RE: Shorter 8mm CV joint from set 42160
#11
(2023-07-13, 4:44)SNIPE Wrote: 52760 is the correct part ID , this is the CV joint with a 3L axle, where as the part I'm talking about has a 2L axle and is light bluish gray rather than dark bluish gray, it came out in set 42160.

Google doesn't give any results for '46841'.

Yes, parts that are not yet released sometimes do get released on the unofficial parts library.

I know the part 52760 and that is why I am asking for the number given in the app.
About the release: it's my bad; I'm talking about the real life release not the ldraw release.
Reply
RE: Shorter 8mm CV joint from set 42160
#12
There seems to be some edge lines missing on the end of the axle.
Reply
RE: Shorter 8mm CV joint from set 42160
#13
(2023-07-12, 17:51)SNIPE Wrote: Ah ok, done:

Any plans on finishing this and do an upload to the PT?
Reply
RE: Shorter 8mm CV joint from set 42160
#14
(2023-09-18, 19:08)Magnus Forsberg Wrote: Any plans on finishing this and do an upload to the PT?

Sorry for late reply,

Nope, I don't know how to make parts in LDraw unless maybe theyre very simple and are based on existing parts that I can borrow script from.

But feel free to finish it if needs must!.
Reply
RE: Shorter 8mm CV joint from set 42160
#15
(2023-09-22, 3:45)SNIPE Wrote: But feel free to finish it if needs must!.

Now on the Part Tracker:
https://library.ldraw.org/tracker/32592
Reply
RE: Shorter 8mm CV joint from set 42160
#16
(2023-09-22, 17:32)Magnus Forsberg Wrote: Now on the Part Tracker:
https://library.ldraw.org/tracker/32592

Cool thx.
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 2 Guest(s)