Parts we are Working on - Part Drei

[Philippe Hurbain]

Working on the new Palm Leave 3565 from Dreamzzz

Any news about this?

[Rene Rechthaler]

I got some unfinished Braille-Bricks, should I rework them for here? (the original author Briqui doesnt want to post them herself here)
https://www.doctor-brick.de/threads/brai...raw.16205/

Edit: do we need all Bricks in the base (unprinted) version too or is it ok if there are only the printed versions?

[Orion Pobursky]

do we need all Bricks in the base (unprinted) version too or is it ok if there are only the printed versions?

Since it's relatively easy to remove printing, there should always be an unprinted version even if it was never produced by LEGO.

[Matthew Coleman]

Since it's relatively easy to remove printing, there should always be an unprinted version even if it was never produced by LEGO.

Yeah, unprinted versions always come in handy for decorating in BrickLink Part Designer!

[Gerald Lasser]

I am working on the 5117-5124 Family of aircraft fusealge parts, interestingly there is parrt 5119 which exists digitally but not yet in any inventory...

[Fredrik Hareide]

Currently trying to gather all the Muppets and start working on the heads

[Fredrik Hareide]

Kermit, Beaker, Animal and Gonzo on PT. Moving on to next

[Philippe Hurbain]

Going to work on 5240 ornithopter blade.

[Philippe Hurbain]

Going to work on 5240 ornithopter blade.

Done: https://library.ldraw.org/search/part?s=ornithopter

[Fredrik Hareide]

Working on the Goat now since I am done with first pass on the Muppets

[Gerald Lasser]

Working on the Goat now since I am done with first pass on the Muppets

Great to see somebody pick up the goat :-)

I don't know why I never finished it, but here is some code to make the tummy a bit more pleasing to the eye:

Original:
3 13 5.291 -28.51 9.913 25.108 -30.263 9.891 12.036 -24.071 9.925
3 13 12.036 -24.071 9.925 25.108 -30.263 9.891 20.418 -24.649 9.917
3 13 9.297 -28.806 -9.521 14.57 -25.022 -9.535 26.029 -29.179 -9.539
3 13 21.566 -25.095 -9.526 26.029 -29.179 -9.539 14.57 -25.022 -9.535

New:
3 10 12.036 -24.071 9.925 8.2787 -25.7058 9.9282 15.988 -44.812 9.657
3 10 23.07 -27.1996 9.9048 12.036 -24.071 9.925 15.988 -44.812 9.657
3 10 16.3498 -23.9271 9.927 12.036 -24.071 9.925 23.07 -27.1996 9.9048
3 10 20.3498 -24.8895 9.9137 16.3498 -23.9271 9.927 23.07 -27.1996 9.9048
3 10 18.2519 -24.7033 -9.5279 26.029 -29.179 -9.539 15.988 -44.812 -9.657
3 10 18.2519 -24.7033 -9.5279 24.0503 -26.6486 -9.5289 26.029 -29.179 -9.539
3 10 21.566 -25.095 -9.526 24.0503 -26.6486 -9.5289 18.2519 -24.7033 -9.5279
3 10 14.57 -25.022 -9.535 18.2519 -24.7033 -9.5279 11.7023 -26.2533 -9.523
3 10 15.988 -44.812 -9.657 9.297 -28.806 -9.521 11.7023 -26.2533 -9.523
3 10 15.988 -44.812 -9.657 11.7023 -26.2533 -9.523 18.2519 -24.7033 -9.5279
3 10 8.2787 -25.7058 9.9282 5.291 -28.51 9.913 15.988 -44.812 9.657
3 10 15.988 -44.812 9.657 25.108 -30.263 9.891 23.07 -27.1996 9.9048

[Fredrik Hareide]

Baaaaaa! Goats on the tracker!

[Fredrik Hareide]

Going to give the reindeer a go now. But have not found the part number for the antlers

[Magnus Forsberg]

But have not found the part number for the antlers

These?
https://library.ldraw.org/tracker/33940

[Fredrik Hareide]

These?
https://library.ldraw.org/tracker/33940

No these. Finally found the number. 52084

[Fredrik Hareide]

Now on PT!

[Fredrik Hareide]

Finished these birds!

[Evert-Jan Boer]

Working on the gremlin head, getting there, but slow...

[Fredrik Hareide]

Working on the gremlin head, getting there, but slow...

Looks good! Made from scratch?

[Evert-Jan Boer]

Looks good! Made from scratch?

No, found it on digital bricks as 26052

[Gerald Lasser]

As the new Speed Champions are due to arrive I did already the new bracket, but I don't have a partnumber yet.


  bracket.PNG (Size: 26.77 KB / Downloads: 515)

[Jeff Jones]

As the new Speed Champions are due to arrive I did already the new bracket, but I don't have a partnumber yet.

which set is this new bracket from?

[Magnus Forsberg]

which set is this new bracket from?

It's in set 76920

[Philippe Hurbain]

Working on 4412/4413 orrery half spheres...

[Philippe Hurbain]

Working on 4412/4413 orrery half spheres...

All done...
https://library.ldraw.org/search/part?s=...unofficial

[Max Martin Richter]

Part 4920
   

It's on PT now:
https://library.ldraw.org/tracker/35513

[Max Martin Richter]

I finally started with the rewrite of the 9V Switches.
But this will take some time.
Edit:
finished 2863,
finished 2860,
finished the metal part for 2860,
finished 2864,
next one: 2859

I stepped back to a rewrite of 2867 as this part will be the base for main geometry of the switch.
I finished 2867, but found out, that there was a fault in my measures. So I stepped back to a rewrite of 2865.

[Jeff Jones]

working on 2010 hau 

[Jeff Jones]

part tracker ready?

[Philippe Hurbain]

Working on 4423

[MING YING CAI]

Working on 4423

I downloaded the following 4 files and placed them in the correct directory, but some of them are wrong when displayed. What could be the problem?

C:\Users\...\AppData\Local\Stud.io\CustomParts

parts/4423.dat
parts/s/4423s01.dat
parts/s/57515s01.dat
parts/s/57515s02.dat

[Philippe Hurbain]

I downloaded the following 4 files and placed them in the correct directory, but some of them are wrong when displayed. What could be the problem?

C:\Users\...\AppData\Local\Stud.io\CustomParts

parts/4423.dat
parts/s/4423s01.dat
parts/s/57515s01.dat
parts/s/57515s02.dat

Studio library is NEVER up-to-date  , and finding missing (official) parts or primitives is a nightmare...
After extensive search, I located the missing one to be 1-16ring4 primitive, to be placed in CustomParts\p folder.

[Philippe Hurbain]

Working on 4423

(Jens Brühl shot first  )

[MING YING CAI]

Studio library is NEVER up-to-date  , and finding missing (official) parts or primitives is a nightmare...
After extensive search, I located the missing one to be 1-16ring4 primitive, to be placed in CustomParts\p folder.

Done, thank you

[Jeff Jones]

==wcuJXZ0RXYwBicvZGIn5Wa0JXYwJWdzBCZuFGIn5WaoRHIt9Gd09mYgQWd0NHIzlGIl52bkBSZiByb0BCZlVmbgM3ZulGa0pQZ0VGbw12bjBSesR3cv1GIulGa0BycpRGIlRWYtBSa

[Takeshi Takahashi]

I'm now making 92586pb02/92586pr0002 to complete set 10222 Winter Village Post Office
https://www.bricklink.com/v2/catalog/cat...8#T=C&C=68
https://rebrickable.com/parts/92586pr000...yes-print/

I've searched images but couldn't find good front and side view images for creating print by LDPC.

Thanks in advance,
Takeshi

[Philippe Hurbain]

Indeed, tough to find something "good enough".
I found this one  https://i.ebayimg.com/images/g/fVoAAOSw7...l1600.webp
and perhaps this video can help:
https://youtu.be/hggajE7MQYE?si=CaOzgeqA8fXjxvCe&t=115 (but definition is not outstanding)

I've searched images but couldn't find good front and side view images for creating print by LDPC.

Another possibility is to rotate the part to match orientation of the image, project with LDPC, then rotate back the result. It will need some vertices snapping after that because of rounding errors, but it can help here!

[Jeff Jones]

I'm now making 92586pb02/92586pr0002 to complete set 10222 Winter Village Post Office
https://www.bricklink.com/v2/catalog/cat...8#T=C&C=68
https://rebrickable.com/parts/92586pr000...yes-print/

I've searched images but couldn't find good front and side view images for creating print by LDPC.

Thanks in advance,
Takeshi

maybe these would help
https://www.youtube.com/watch?v=gz4qV5_zuMo
https://www.youtube.com/watch?v=cUNwoHkHh3A

[Gerald Lasser]

I'm now making 92586pb02/92586pr0002 to complete set 10222... 
I've searched images but couldn't find good front and side view images for creating print by LDPC.

Thanks in advance,
Takeshi

I got this dog, will make some pictures in the morning

[Jens Brühl]

I will start working on 42083 Bugatti Chiron Sticker sheet with these stickers (Flat and Formed):

• #5   6228775e.dat
  
• #7   6228775g.dat
  
• #11   6228775k.dat
  
• #14   6228775n.dat
  

[Rene Rechthaler]

I will start working on 42083 Bugatti Chiron Sticker sheet with these stickers (Flat and Formed):

• #5   6228775e.dat
  
• #7   6228775g.dat
  
• #11   6228775k.dat
  
• #14   6228775n.dat
  

should the "Chiron" get a logo subfile/prim? (both text and bounding box separated for reusing)
its used in 4 different stickers

[Gabriel Läufer]

I (could) work on:

• #  5    6228775e.dat (not started yet, I would go for a TEXMAP)
• #  7    6228775g.dat (not started yet)
• # 16   6228775p.dat (~ 70% finished)
• # 17   6228775q.dat (~ 50% finished)
• # 18   6228775r.dat (nearly finished)
• # 19   6228775s.dat (nearly finished)
• # 21   6228775u.dat (nearly finished)
• # 23   6228775w.dat (nearly finished)
• # 24   6228775x.dat (nearly finished)

But I would definitely need help with the formed stickers (still struggling a bit with Slicer Pro). 

@Jens: If you have already started with some of the stickers above, please proceed. I will stop my work.

[Takeshi Takahashi]

I got this dog, will make some pictures in the morning

@Philo, @Jens, @Gerald
Thank you for your great help.
I'll make the print!!

[Jens Brühl]

I will start working on 42083 Bugatti Chiron Sticker sheet with these stickers (Flat and Formed):

• #5   6228775e.dat
  
• #7   6228775g.dat
  
• #11   6228775k.dat
  
• #14   6228775n.dat
  

Done!
https://library.ldraw.org/parts/sticker-sheets/486