+- LDraw.org Discussion Forums (https://forums.ldraw.org)
+-- Forum: Models and Parts (https://forums.ldraw.org/forum-18.html)
+--- Forum: Part Requests (https://forums.ldraw.org/forum-30.html)
+--- Thread: Parts we are Working on - Part Drei (/thread-26656.html)
Parts we are Working on - Part Drei - Orion Pobursky - 2022-08-27
New thread since the old one is getting unwieldy
RE: Parts we are Working on - Part Drei - Travis Cobbs - 2022-08-28
(2022-08-27, 22:25)Orion Pobursky Wrote: New thread since the old one is getting unwieldy
👏
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2022-09-03
I got a draft of the new mudguard 80567 used in the Camaro 10304
I am missing some pics on the shape of the lip when it touches the curved slope...
RE: Parts we are Working on - Part Drei - Willy Tschager - 2022-09-07
Fixing:
https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/30593.dat
w.
RE: Parts we are Working on - Part Drei - Hebben - 2022-10-22
Wow that looks good... can the part 80567 - as is - be made available? If it's not perfect yet: no problem.
RE: Parts we are Working on - Part Drei - Philippe Hurbain - 2022-12-18
Working on the new 2023 Technic panels....
RE: Parts we are Working on - Part Drei - Knud Ahrnell Albrechtsen - 2022-12-29
Hi
When will this part be available for download ??
Kind Regards
Knud
RE: Parts we are Working on - Part Drei - Philippe Hurbain - 2022-12-29
(2022-12-29, 7:10)Knud Ahrnell Albrechtsen Wrote: HiOh sorry, I should have posted here. All the new panels are now available on PT!
When will this part be available for download ??
Kind Regards
Knud
2023 part numbers: 2459/p01/p02, 2387, 2389, 2391, 2393, 2395, 2403, 2457
RE: Parts we are Working on - Part Drei - Fredrik Hareide - 2022-12-31
Working on stuntz ramps
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-01
Interesting spiral part 73763 in the Police Station.
Looking forward to the mesh from the instructions app to finetune
RE: Parts we are Working on - Part Drei - Fredrik Hareide - 2023-01-03
(2023-01-01, 20:26)Gerald Lasser Wrote: Interesting spiral part 73763 in the Police Station.
Looking forward to the mesh from the instructions app to finetune
Mesh is already in the instructions app. And the gear box that comes with it too.
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-03
(2023-01-03, 8:09)Fredrik Hareide Wrote: Mesh is already in the instructions app. And the gear box that comes with it too.
Thanks for the hint, I got it, and I was really point on, just the tips are 1 LDU off :-)
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-03
(2022-12-31, 14:24)Fredrik Hareide Wrote: Working on stuntz ramps
Which ones? The looping parts?
RE: Parts we are Working on - Part Drei - Fredrik Hareide - 2023-01-03
(2023-01-03, 11:52)Gerald Lasser Wrote: Which ones? The looping parts?
Oh, a bit specific might be an idea yes. 77822 and 77823 was my plan. But got some feedback from Philo that will probably take me some time to fix 😅
RE: Parts we are Working on - Part Drei - Fredrik Hareide - 2023-01-03
(2022-09-03, 16:10)Gerald Lasser Wrote: I got a draft of the new mudguard 80567 used in the Camaro 10304
I am missing some pics on the shape of the lip when it touches the curved slope...
You didn't put this on PT right? Couldn't find it. Saw a question about the part on fb and had seen your post here.
RE: Parts we are Working on - Part Drei - Knud Ahrnell Albrechtsen - 2023-01-04
(2022-12-29, 8:16)Philippe Hurbain Wrote: Oh sorry, I should have posted here. All the new panels are now available on PT!
2023 part numbers: 2459/p01/p02, 2387, 2389, 2391, 2393, 2395, 2403, 2457
Hi Philippe
Thanks for the reply.
But the part i am looking for is 80567
Kind Regards
Knud
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-04
(2023-01-03, 22:48)Fredrik Hareide Wrote: You didn't put this on PT right? Couldn't find it. Saw a question about the part on fb and had seen your post here.
No, i did not put it on the PT, as it was a draft, I am back now with more time to dedicate and can finish it for the tracker.
Edit: I saw there were some more requests, I put it immediately in my queue for cleaning.
Edit II: It is uploaded on PT https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/80567.dat
RE: Parts we are Working on - Part Drei - Philippe Hurbain - 2023-01-04
(2023-01-04, 10:58)Knud Ahrnell Albrechtsen Wrote: Thanks for the reply.Sorry, threading issue... let's see with Gerald who started that part
But the part i am looking for is 80567
https://forums.ldraw.org/thread-26656-post-48856.html#pid48856
RE: Parts we are Working on - Part Drei - Philippe Hurbain - 2023-01-08
(2022-08-27, 22:25)Orion Pobursky Wrote: New thread since the old one is getting unwieldy
Working on 1846 mudguard.
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-08
(2023-01-08, 8:23)Philippe Hurbain Wrote: Working on 1846 mudguard.
Philo, i am nearly finished with that
RE: Parts we are Working on - Part Drei - Philippe Hurbain - 2023-01-08
(2023-01-08, 14:40)Gerald Lasser Wrote: Philo, i am nearly finished with that...so it will be yours
RE: Parts we are Working on - Part Drei - Magnus Forsberg - 2023-01-08
I've made the new car base. Think I can see the number, but not sure.
Partnumber is 3385. Now on the Tracker.
RE: Parts we are Working on - Part Drei - Maarten Verijdt - 2023-01-09
(2023-01-08, 14:40)Gerald Lasser Wrote: Philo, i am nearly finished with that
Where can I find it?
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-09
(2023-01-09, 14:26)Maarten Verijdt Wrote: Where can I find it?
nearly finished
should be done today then it is on the tracker, search for 1846 then
RE: Parts we are Working on - Part Drei - SNIPE - 2023-01-10
I will try to make the upcoming 1x3 round plate tomorrow, by using the 1x2 round plate as a template.
This is one of the new parts for speed champions 2023.
Shouldn't be too hard.
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-11
(2023-01-09, 14:26)Maarten Verijdt Wrote: Where can I find it?
Done, Part is on tracker: https://www.ldraw.org/cgi-bin/ptdetail.cgi?s=1846
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-11
I did a rough sketch of 1744, the new 3x3 dome piece, as I have only the usual standard resolution pics available, I have approximated the curve as follows:
1 16 37.8823 68 0 -67.88225 0 0 0 0 -96.16652 0 1 0 48\1-8edge.dat
1 1 0 68 0 30 0 0 0 4 0 0 0 30 48\4-4cyli.dat
1 1 0 0 0 3 0 0 0 1 0 0 0 3 4-4ring2.dat
1 1 0 0 0 1 0 0 0 1 0 0 0 1 4-4ring9.dat
1 1 0 0 0 1 0 0 0 1 0 0 0 1 stud2.dat
any opinions?
I think I need to BL some
RE: Parts we are Working on - Part Drei - Mark Kennedy - 2023-01-11
(2023-01-11, 16:29)Gerald Lasser Wrote: I did a rough sketch of 1744, the new 3x3 dome piece, as I have only the usual standard resolution pics available, I have approximated the curve as follows:
1 16 37.8823 68 0 -67.88225 0 0 0 0 -96.16652 0 1 0 48\1-8edge.dat
1 1 0 68 0 30 0 0 0 4 0 0 0 30 48\4-4cyli.dat
1 1 0 0 0 3 0 0 0 1 0 0 0 3 4-4ring2.dat
1 1 0 0 0 1 0 0 0 1 0 0 0 1 4-4ring9.dat
1 1 0 0 0 1 0 0 0 1 0 0 0 1 stud2.dat
any opinions?
I think I need to BL some
It seems to be more of a cone than a dome. Good luck with the part.
RE: Parts we are Working on - Part Drei - Fredrik Hareide - 2023-01-12
Working on 3039 prints from 2021 and backwards.
RE: Parts we are Working on - Part Drei - Javier Orquera - 2023-01-12
Hello: I am working on the Super Mario Bar/Scaner codes; in fact I finished ALL of them, as texmap (except the latest ones), but the problem I have is the number of the sticker, since it is applied directly to the part itself. Anyone have a clue? Thanks you very much.
RE: Parts we are Working on - Part Drei - Rene Rechthaler - 2023-01-12
I am working on applying the pattern on 385:
https://www.ldraw.org/parts/official-part-lookup.html?folder=parts&partid=385
https://www.bricklink.com/v2/catalog/catalogitem.page?P=bb0160pb01&name=Baseplate,%20Road%2050%20x%2050%20with%203-way%20Curve&category=%5BBaseplate,%20Road%5D#T=C&C=6
While trying to apply the pattern i found an error in the official file (one side of the T has only 17 studs instead of 18).
Does anyone have the sets/the baseplate alone? I am not sure about the width of the road.
RE: Parts we are Working on - Part Drei - Magnus Forsberg - 2023-01-12
(2023-01-12, 21:23)Rene Rechthaler Wrote: I am working on applying the pattern on 385:
While trying to apply the pattern i found an error in the official file (one side of the T has only 17 studs instead of 18).
Yes, looks like you're right.
It's missing many studs.
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-12
I think the sticker should get a seperate u-number. With the patterns then being uxxxxpyyy.dat
Orion should give you a number
like this part:
https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/80319.dat
RE: Parts we are Working on - Part Drei - Orion Pobursky - 2023-01-12
(2023-01-12, 22:48)Gerald Lasser Wrote: With the patterns then being uxxxxpyyy.dat
We've already assigned a number: 325. The patterns should be 325pXX.
Stickers with unknown number should be s<x> with x being next number available.
RE: Parts we are Working on - Part Drei - SNIPE - 2023-01-14
(2023-01-10, 5:44)SNIPE Wrote: I will try to make the upcoming 1x3 round plate tomorrow, by using the 1x2 round plate as a template.
This is one of the new parts for speed champions 2023.
Shouldn't be too hard.
Ok this is as far as I got, but it has a lot of problems:
https://pastebin.com/TSXMYFja
Anyone know how to fix this?
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-14
(2023-01-14, 11:48)SNIPE Wrote: Ok this is as far as I got, but it has a lot of problems:
https://pastebin.com/TSXMYFja
Anyone know how to fix this?
use the ring-prim only at the ends of the part, in the middle use ndis and fill up with triangles/quads (see pink areas), then theres no overlap
1 16 20 0 -54 0 0 1 0 -1 0 -1 0 0 stud3.dat
1 16 30 4 -54 0 0 2 0 -1 0 -2 0 0 2-4ring3.dat
1 16 30 4 -54 0 0 2 0 -1 0 -2 0 0 2-4ring4.dat
0 BFC INVERTNEXT
1 16 30 0 -54 0 0 6 0 4 0 -6 0 0 2-4cylo.dat
1 16 30 0 -54 0 0 2 0 -1 0 -2 0 0 2-4ring2.dat
1 16 30 0 -54 0 0 -4 0 -1 0 -4 0 0 2-4ndis.dat
1 16 30 0 -54 0 0 4 0 1 0 -4 0 0 4-4edge.dat
0 BFC INVERTNEXT
1 16 30 0 -54 0 0 4 0 -4 0 -4 0 0 4-4cyli.dat
1 16 30 -4 -54 0 0 10 0 8 0 -10 0 0 2-4cylo.dat
1 16 30 -4 -54 0 0 2 0 1 0 -2 0 0 2-4ring4.dat
1 16 30 -4 -54 0 0 2 0 1 0 -2 0 0 2-4ring3.dat
1 16 30 -4 -54 0 0 6 0 1 0 -6 0 0 4-4edge.dat
1 16 30 -4 -54 0 0 -6 0 1 0 -6 0 0 2-4ndis.dat
1 16 30 -4 -54 0 0 1 0 1 0 -1 0 0 stud2a.dat
1 16 20 0 -62 -10 0 0 0 0 -4 0 -2 0 box3u10p.dat
1 16 20 2 -61 -10 0 0 0 0 2 0 1 0 box2-11.dat
1 16 -10 4 -54 0 0 -2 0 -1 0 2 0 0 2-4ring3.dat
1 16 -10 4 -54 0 0 -2 0 -1 0 2 0 0 2-4ring4.dat
0 BFC INVERTNEXT
1 16 -10 0 -54 0 0 -6 0 4 0 6 0 0 2-4cylo.dat
1 16 10 0 -54 0 0 4 0 -1 0 4 0 0 2-4ndis.dat
1 16 10 0 -54 0 0 -4 0 1 0 4 0 0 4-4edge.dat
0 BFC INVERTNEXT
1 16 10 0 -54 0 0 -4 0 -4 0 4 0 0 4-4cyli.dat
1 16 -10 -4 -54 0 0 -10 0 8 0 10 0 0 2-4cylo.dat
1 16 -10 -4 -54 0 0 -2 0 1 0 2 0 0 2-4ring4.dat
1 16 -10 -4 -54 0 0 -2 0 1 0 2 0 0 2-4ring3.dat
1 16 10 -4 -54 0 0 -6 0 1 0 6 0 0 4-4edge.dat
1 16 10 -4 -54 0 0 6 0 1 0 6 0 0 4-4ndis.dat
1 16 -10 -4 -54 0 0 -1 0 1 0 1 0 0 stud2a.dat
1 16 20 0 -46 10 0 0 0 0 -4 0 2 0 box3u10p.dat
1 16 20 2 -47 10 0 0 0 0 2 0 -1 0 box2-11.dat
1 16 0 0 -46 10 0 0 0 0 -4 0 2 0 box3u10p.dat
1 16 10 -4 -54 0 0 -1 0 1 0 1 0 0 stud2a.dat
0 BFC INVERTNEXT
1 16 -10 0 -54 0 0 -4 0 -4 0 4 0 0 4-4cyli.dat
1 16 0 2 -47 10 0 0 0 0 2 0 -1 0 box2-11.dat
1 16 0 2 -61 -10 0 0 0 0 2 0 1 0 box2-11.dat
1 16 -10 0 -54 0 0 4 0 -1 0 4 0 0 2-4ndis.dat
1 16 0 0 -62 -10 0 0 0 0 -4 0 -2 0 box3u10p.dat
1 16 0 0 -54 0 0 1 0 -1 0 -1 0 0 stud3.dat
1 16 10 0 -54 0 0 -4 0 -1 0 -4 0 0 2-4ndis.dat
1 16 -10 4 -54 0 0 -2 0 -1 0 -2 0 0 2-4ring4.dat
1 16 -10 4 -54 0 0 -2 0 -1 0 -2 0 0 2-4ring3.dat
1 16 30 4 -54 0 0 2 0 -1 0 2 0 0 2-4ring4.dat
1 16 30 4 -54 0 0 2 0 -1 0 2 0 0 2-4ring3.dat
1 16 -10 0 -54 0 0 -2 0 -1 0 2 0 0 2-4ring2.dat
1 16 -10 -4 -54 0 0 6 0 1 0 6 0 0 2-4ndis.dat
4 13 -6 0 -54 6 0 -54 6 0 -58 -6 0 -58
3 13 -10 0 -60 -10 0 -58 -6 0 -58
3 13 -10 0 -60 -6 0 -58 6 0 -58
RE: Parts we are Working on - Part Drei - SNIPE - 2023-01-14
(2023-01-14, 12:55)Gerald Lasser Wrote: use the ring-prim only at the ends of the part, in the middle use ndis and fill up with triangles/quads (see pink areas), then theres no overlap
Ok, I'm in way over my head here so I'll just wait for someone to put it on the parts tracker (someone will do it eventually anyhow)
I don't have any tools such as blender or anything like that, I am trying (probably rather foolishjly) creating parts from LDRAW script alone.
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-14
(2023-01-14, 15:35)SNIPE Wrote: Ok, I'm in way over my head here so I'll just wait for someone to put it on the parts tracker (someone will do it eventually anyhow)
I don't have any tools such as blender or anything like that, I am trying (probably rather foolishjly) creating parts from LDRAW script alone.
Here it is, I do not know the number of the part.
You need to get used to LDPE, then it is a breeze to do them.
RE: Parts we are Working on - Part Drei - SNIPE - 2023-01-14
(2023-01-14, 17:40)Gerald Lasser Wrote: Here it is, I do not know the number of the part.
You need to get used to LDPE, then it is a breeze to do them.
Thanks, I'll take a look at LDPE
RE: Parts we are Working on - Part Drei - N. W. Perry - 2023-01-15
(2023-01-14, 15:35)SNIPE Wrote: I don't have any tools such as blender or anything like that, I am trying (probably rather foolishjly) creating parts from LDRAW script alone.
Actually, I daresay that's a very good way to learn! Of course, some parts will just be too complex to code by hand…
RE: Parts we are Working on - Part Drei - Fredrik Hareide - 2023-01-15
(2023-01-03, 22:44)Fredrik Hareide Wrote: Oh, a bit specific might be an idea yes. 77822 and 77823 was my plan. But got some feedback from Philo that will probably take me some time to fix 😅
Philo ended up fixing 77823 because it was too big a task for me. 😅
RE: Parts we are Working on - Part Drei - Willy Tschager - 2023-01-15
(2023-01-14, 15:35)SNIPE Wrote: I don't have any tools such as blender or anything like that, I am trying (probably rather foolishjly) creating parts from LDRAW script alone.
Some like it the hard way. You should do yourself a favore and switch to LDPE.
w.
RE: Parts we are Working on - Part Drei - Fredrik Hareide - 2023-01-16
Done with all 3039 prints for 2020 and 2021
Will continue making the missing 3039 prints from earlier years.
RE: Parts we are Working on - Part Drei - Takeshi Takahashi - 2023-01-17
(2023-01-16, 13:31)Fredrik Hareide Wrote: Done with all 3039 prints for 2020 and 2021
Wow, nice prints!!
The next "pattern master" has come, so encouraging for us
RE: Parts we are Working on - Part Drei - Javier Orquera - 2023-01-17
(2023-01-12, 21:16)Javier Orquera Wrote: Hello: I am working on the Super Mario Bar/Scaner codes; in fact I finished ALL of them, as texmap (except the latest ones), but the problem I have is the number of the sticker, since it is applied directly to the part itself. Anyone have a clue? Thanks you very much.
Hi: I attach two files (as examples) of what I do. Both of them lack the description because don't know what to use: Bricklink, Rebrickable, Brickowl, or "my creativity".
Also the dimensions of the texmap, my gess, need to be corrected.
In general, don't know if I'm doing this the right way.
RE: Parts we are Working on - Part Drei - Philippe Hurbain - 2023-01-18
(2023-01-17, 18:09)Javier Orquera Wrote: Hi: I attach two files (as examples) of what I do. Both of them lack the description because don't know what to use: Bricklink, Rebrickable, Brickowl, or "my creativity".Looks all good to me, except that using hires chrd/cyli is overkill at that size. Texmap resolution look OK too? The only thing I would do would be to create 2 subparts (1 for bottom/sides, 1 for top) as they are common for all stickers. BL description seems to make sense.
Also the dimensions of the texmap, my gess, need to be corrected.
In general, don't know if I'm doing this the right way.
Remains the question of fallback patter. img4dat makes a good work here, here are unretouched results for your images.
RE: Parts we are Working on - Part Drei - Javier Orquera - 2023-01-18
(2023-01-18, 17:15)Philippe Hurbain Wrote: Looks all good to me, except that using hires chrd/cyli is overkill at that size. Texmap resolution look OK too? The only thing I would do would be to create 2 subparts (1 for bottom/sides, 1 for top) as they are common for all stickers. BL description seems to make sense.
Remains the question of fallback patter. img4dat makes a good work here, here are unretouched results for your images.
Philippe: Thank you for your advise. I will change the prims in the corners to standard resolution. All the images (in these case, 195 img) are extrated from the Lego Builder App and are 512px with the only exception of one, it's 128px. Also, i take your suggestion: split in 2 subparts.
May I need to stand on the texmap format or I change to img4dat?
RE: Parts we are Working on - Part Drei - Philippe Hurbain - 2023-01-18
(2023-01-18, 17:58)Javier Orquera Wrote: Philippe: Thank you for your advise. I will change the prims in the corners to standard resolution. All the images (in these case, 195 img) are extrated from the Lego Builder App and are 512px with the only exception of one, it's 128px. Also, i take your suggestion: split in 2 subparts.I'm perfectly OK with texmap only, especially for stickers. Other opinions?
May I need to stand on the texmap format or I change to img4dat?
RE: Parts we are Working on - Part Drei - Gerald Lasser - 2023-01-18
(2023-01-11, 16:29)Gerald Lasser Wrote: I did a rough sketch of 1744, the new 3x3 dome piece, as I have only the usual standard resolution pics available, I have approximated the curve as follows:
1 16 37.8823 68 0 -67.88225 0 0 0 0 -96.16652 0 1 0 48\1-8edge.dat
The curve fits very well, I got the part now in my hands, will finish it in the next days
RE: Parts we are Working on - Part Drei - N. W. Perry - 2023-01-18
(2023-01-18, 19:44)Philippe Hurbain Wrote: I'm perfectly OK with texmap only, especially for stickers. Other opinions?
It's much easier, and the resolution is potentially better (despite it being a raster). But the common wisdom has always been that LDraw geometry is preferred except where impractical (I think because of varying support among different viewers/editors).
Better still, though, would be improvements to the LDraw format and/or editors to a) increase the precision and resolution of LDraw vector geometry, and b) streamline the conversion process from graphical formats to LDraw format.
