2447 Minifig Helmet Visor


2447 Minifig Helmet Visor
#1
https://www.ldraw.org/cgi-bin/ptdetail.c...s/2447.dat

Can we get the issues with the part fixed? Its been on the tracker for 8 years and it's holding stuff up
Reply
RE: 2447 Minifig Helmet Visor
#2
I think both the visor and the helmet is off.

I made this image to describe the issues. Click it, to view the animation.

   

Yellow is the mesh from LDD, part 30124, which is an alias of 2446.
Blue is the LDD mesh of visor 2447.
Trans red are the ldraw versions.


The simple solution is to resize the current visor.

   

Shrinking it is possible. It would follow the green line, instead of the red.

But the major issue would be how to handle all the other accessories made to fit on the helmet
Different knight helmet visors, diving goggles, ski goggles, space visor, night vision goggles, underwater visor, and so on...
Reply
RE: 2447 Minifig Helmet Visor
#3
As I'm going to create printed helmets 2446px2, 2446px3 and 2446px5, should I wait for the geometry fix of 2446?
Reply
RE: 2447 Minifig Helmet Visor
#4
We need to hash out what we want to do while attempting to stay as close to real world as possible. Real world measurements trump the LDD mesh.
Reply
RE: 2447 Minifig Helmet Visor
#5
Bump to this discussion as it is holding up the certification of parts.
Reply
RE: 2447 Minifig Helmet Visor
#6
I'm in the process of correcting these parts now.

This makes it necessary to obsolete a bunch of parts due to bad geometry. But how do I pick a new number for the reworked parts?
I think the practice here is to make a b-version.  2447 will become 2447b.

The base part is helmet 2446. There are three prints made and a couple of suggested assemblies.
2446 is an old number that went out of production 2002. It has been replaced by 30124. We have 30124 as an alias of 2446. 
The helmet is known at Bricklink as 2446, but is only known as 30124 at Brickset.

Would it be possible to just obsolete 2446, and then reuse 30124 as the recreated version, or do I need to obsolete it too, and make 30124b?

Many of the different visors might be possible to use as is on the new helmet. Only minor adjustments are needed and they have a good origin.
My plan is to make a b-version of all visors that have a bad origin, not in the centre of the rotation point.
Reply
RE: 2447 Minifig Helmet Visor
#7
(2024-07-18, 13:29)Magnus Forsberg Wrote: This makes it necessary to obsolete a bunch of parts due to bad geometry. But how do I pick a new number for the reworked parts?
I think the practice here is to make a b-version.  2447 will become 2447b.

So normal practice would be to moved to 2447 to 2447a and the new version will be 2447b.
Reply
RE: 2447 Minifig Helmet Visor
#8
(2024-07-18, 13:40)Orion Pobursky Wrote: So normal practice would be to moved to 2447 to 2447a and the new version will be 2447b.

Yes, if I made a design variant.
In this case I want to obsolete 2447, no need for a  Move to-file, and the new version is 2447b.
Reply
RE: 2447 Minifig Helmet Visor
#9
(2024-07-18, 14:18)Magnus Forsberg Wrote: Yes, if I made a design variant.
In this case I want to obsolete 2447, no need for a  Move to-file, and the new version is 2447b.

I did a little research and I agree.
Reply
RE: 2447 Minifig Helmet Visor
#10
Back to the real question.  Do I need to obsolete the alias part too?
Reply
RE: 2447 Minifig Helmet Visor
#11
(2024-07-18, 15:59)Magnus Forsberg Wrote: Back to the real question.  Do I need to obsolete the alias part too?

No. It's never been official.
Reply
RE: 2447 Minifig Helmet Visor
#12
(2024-07-18, 16:29)Orion Pobursky Wrote: No. It's never been official.

Scratch that. Yes 30124 is official and needs to obsoleted as well.
Reply
RE: 2447 Minifig Helmet Visor
#13
Ok, I will obsolete both 2446 and 30124, but what partnumber should be picked as the base for the corrected design?
I want to pick 30124b, since 30124 is the number used by lego today as seen on the Brickset pages.
But both BL and RB seems to prefer 2446(b) for their pattern numbers.
Reply
RE: 2447 Minifig Helmet Visor
#14
Nice work, thanks!

Is someone already working on the missing patterns? If not, I'd really like to do a few of the older ones.
Reply
RE: 2447 Minifig Helmet Visor
#15
(2024-07-28, 1:39)Chris Böhnke Wrote: Is someone already working on the missing patterns? If not, I'd really like to do a few of the older ones.

I'm only gonna rework the three official patterned parts, p01, p50 and p51.
Feel free to work on any of the other helmets.

Let me know what you think of the new helmet subfiles.
Reply
RE: 2447 Minifig Helmet Visor
#16
(2024-07-29, 16:45)Magnus Forsberg Wrote: I'm only gonna rework the three official patterned parts, p01, p50 and p51.
Feel free to work on any of the other helmets.

Let me know what you think of the new helmet subfiles.

Not having the additional subfile in the patternable top is certainly welcome.

On the part's page there was talk about this https://www.bricklink.com/v2/catalog/cat...P=2446pb43, the pattern is mirrored here, can confirm this, if this helps in some way.

Also, there is a single helmet (I think?) out there with only the 'forehead' area printed, but asymmetrical:
https://www.bricklink.com/v2/catalog/cat...=1#T=C&C=1

Currently, I would make a full two-halves version of the top and apply the pattern to the front. Do you think it is worth to create a subfile for the forehead only (so the remainder can still be mirrored)? I still think it's thus far the only version of this helmet with only front print.
Reply
RE: 2447 Minifig Helmet Visor
#17
Think I should do something like this.

   
Reply
RE: 2447 Minifig Helmet Visor
#18
(2024-07-30, 7:27)Magnus Forsberg Wrote: Think I should do something like this.

Looks fine to me.
Reply
RE: 2447 Minifig Helmet Visor
#19
(2022-08-26, 3:15)Orion Pobursky Wrote: Can we get the issues with the part fixed? Its been on the tracker for 8 years and it's holding stuff up

All affected files (except one print, working on it) are now reworked and uploaded to the PT.
There is a handy summary page here:   https://library.ldraw.org/tracker/summary/4
Please visit it, and give the files a review.

   
Reply
RE: 2447 Minifig Helmet Visor
#20
Thanks for all this effort. You rock.
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 2 Guest(s)