Star Wars 2020


Star Wars 2020
#1
Thread for Star Wars 2020 Models
Reply
75277 - Boba Fett
#2
75277 - Boba Fett

   

OMR Compliant
Missing: Printed label plate


Attached Files
.mpd   75277 - Boba Fett.mpd (Size: 42.12 KB / Downloads: 2)
Reply
RE: 75277 - Boba Fett
#3
(2020-05-06, 17:31)Orion Pobursky Wrote: 75277 - Boba Fett



OMR Compliant
Missing: Printed label plate
Nice!

If you did not notice yet I uploaded the patterned part yesterday on PT: https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/6180ps1.dat

It was not reviewed yet so it may contain issues.
Reply
RE: 75277 - Boba Fett
#4
(2020-05-07, 6:13)Vincent Messenet Wrote: Nice!

If you did not notice yet I uploaded the patterned part yesterday on PT: https://www.ldraw.org/cgi-bin/ptdetail.cgi?f=parts/6180ps1.dat

It was not reviewed yet so it may contain issues.

Oh, awesome. I tried to order this set for May 4th but it was sold out with no backorder option :/
Reply
RE: 75277 - Boba Fett
#7
(2020-05-07, 14:23)Orion Pobursky Wrote: Oh, awesome. I tried to order this set for May 4th but it was sold out with no backorder option :/

Yes, it was super aggravating that they used these three helmet sets in their early ad copy for May the 4th, and then sold out of two of them, and only allowed backorders for the tie fighter pilot.
Reply
RE: Star Wars 2020
#5
(2020-05-06, 17:28)Orion Pobursky Wrote: Thread for Star Wars 2020 Models
Already posted in the thread "Star Wars Mini Series"
40407 - Death Star II Battle

   
Reply
RE: Star Wars 2020
#6
Looks great.

I think theme by year (for large themes) is the way to go unless there's an obvious subset (Modulars, UCS Models, etc...)
Reply
RE: Star Wars 2020
#8
Just to let you know I am doing the TIE-Fighter pilot and Stormtrooper helmets.

TIE pilot done, exept the airtubes. Any idea how to model those?

Stormtrooper almost done.

Will post draft files soon and make OMR.
Jaco van der Molen
lpub.binarybricks.nl
Reply
RE: Star Wars 2020
#9
75276 - Stormtrooper

   

OMR compliant? MPDCenter says not, but I cannot resolve the problems it reports.
Can someone take a look?

Missing stickers


Attached Files
.ldr   75276 - Stormtrooper.ldr (Size: 42.21 KB / Downloads: 4)
Jaco van der Molen
lpub.binarybricks.nl
Reply
RE: Star Wars 2020
#10
75274 - TIE Fighter pilot

   

Not OMR compliant yet.

Missing air tubes. Any ideas on how to model those?

Missing stickers.

Pattern on 4x4 dishes done with texture mapping.


Attached Files
.ldr   75274 - TIE Fighter pilot.ldr (Size: 43.52 KB / Downloads: 4)
Jaco van der Molen
lpub.binarybricks.nl
Reply
RE: Star Wars 2020
#11
(2020-05-26, 7:13)Jaco van der Molen Wrote: Missing air tubes. Any ideas on how to model those?

Looks like that's made with these train wheels:
https://www.ldraw.org/parts/official-par...rtid=50254

You could devise an LDCad template using these as donor parts, I should think.
Reply
RE: Star Wars 2020
#12
(2020-05-26, 15:50)N. W. Perry Wrote: Looks like that's made with these train wheels:
https://www.ldraw.org/parts/official-par...rtid=50254

You could devise an LDCad template using these as donor parts, I should think.

Yah, definitely could do this with LDCad flex objects. I'll see what I can gen up if someone else doesn't beat me to it.
Reply
RE: Star Wars 2020
#13
(2020-05-26, 7:12)Jaco van der Molen Wrote: OMR compliant? MPDCenter says not, but I cannot resolve the problems it reports.
Can someone take a look?

First thing needed to do was add the "LDRAW_ORG Model" line to all subfiles. After changing the main file with the header dialog, MPDCenter offered to automatically change the rest as well.

Next, some file titles (description) don't match the Name line (they list multiple step numbers, for example). This was most easily fixed in LDCad with Clean Up…sync name and sync description.

One file had an incorrect header sequence, and another had an unofficial part needing to be added. (LDCad's Clean Up could have handled this as well, but I did them separately.)

After adding the unofficial part, it and its subfiles just needed to be renamed for OMR conformity. Again, LDCad's Clean Up works (first remove set number prefixes, then re-add them to everything, otherwise you'll get double prefixes for those files that were already correct).

The resulting file passes OMR check and is attached (after fixing the filename to .mpd and deleting duplicate licenses in two subfiles—both of which were caught by LDInspector but not by MPDCenter):

.mpd   75276 - Stormtrooper.mpd (Size: 52.34 KB / Downloads: 1)
Reply
RE: Star Wars 2020
#14
(2020-05-26, 17:19)N. W. Perry Wrote: First thing needed to do was add the "LDRAW_ORG Model" line to all subfiles. After changing the main file with the header dialog, MPDCenter offered to automatically change the rest as well.

Next, some file titles (description) don't match the Name line (they list multiple step numbers, for example). This was most easily fixed in LDCad with Clean Up…sync name and sync description.

One file had an incorrect header sequence, and another had an unofficial part needing to be added. (LDCad's Clean Up could have handled this as well, but I did them separately.)

After adding the unofficial part, it and its subfiles just needed to be renamed for OMR conformity. Again, LDCad's Clean Up works (first remove set number prefixes, then re-add them to everything, otherwise you'll get double prefixes for those files that were already correct).

The resulting file passes OMR check and is attached (after fixing the filename to .mpd and deleting duplicate licenses in two subfiles—both of which were caught by LDInspector but not by MPDCenter):

OK, tnx Perry!

Where can I find Clean Up… sync name and sync description in LDCad?
Jaco van der Molen
lpub.binarybricks.nl
Reply
RE: Star Wars 2020
#15
(2020-05-27, 17:24)Jaco van der Molen Wrote: OK, tnx Perry!

Where can I find Clean Up… sync name and sync description in LDCad?


Clean Up is in the File menu.
Reply
RE: Star Wars 2020
#16
(2020-05-27, 18:18)Orion Pobursky Wrote: Clean Up is in the File menu.

Oh dear, never knew about its existence  Blush Big Grin
Jaco van der Molen
lpub.binarybricks.nl
Reply
RE: Star Wars 2020
#17
75272 - Sith TIE Fighter
   
OMR Compliant
Missing: 2 patterned parts and Minifigs


Attached Files
.mpd   75272 - Sith TIE Fighter.mpd (Size: 23.45 KB / Downloads: 0)
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)