1970's - LEGOland and hobby sets

[Takeshi Takahashi]

Thanks for reviewing the models!!
I'll fix my models.
They are built several years ago (before joining this community) and prepared for OMR recently, so some errors may exist.

Regarding part 3062, I think there were both molds (3062a and 3062b) exist concurrently in those years (around 1978).
As I (born in 1983 and begun playing LEGO system bricks in 1986) haven't seen a real-life 3062a, the transition should be rather fast.
Thus, I have modeled them with 3062b, except the sets before 1977 (pre-minifig era).

[N. W. Perry]

By the way, has someone begun work on sets 361, 375, 585, 6371, 6375-2 ? I have them (in various non-finished-yet state, especially for stickers) on my hard disk

I have the yellow castle:

  6075 Castle.ldr (Size: 133.52 KB / Downloads: 13)

It's an older file, done in Bricksmith using LSynth, and not OMR-compliant, but perfectly usable.

[Takeshi Takahashi]

  675-1 - Snack Bar.mpd (Size: 4.85 KB / Downloads: 9)
   
Set: 675-1 - Snack Bar
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51

[Takeshi Takahashi]

> By the way, has someone begun work on sets 361, 375, 585, 6371, 6375-2 ? I have them (in various non-finished-yet state, especially for stickers) on my hard disk

For set 6375-2, I'm now working for stickers (sheet No. 192375) but I haven't built the model itself.
Please go ahead.

[Jeremie Guillaume]

I have the yellow castle:

It's a nice surprise.  And stickers already exist !! (on my side I began making this one only very recently, so I hadn't checked yet for their existence in the library).
I think you should OMRize it for inclusion in the OMR
One possible enhancement would be to make separate LDR's for the four corner baseplates, which are intended to rotate and allow opening one entire side or the other of the castle. That would make using that feature of the original model easier IMO.

[Jeremie Guillaume]

For set 6375-2, I'm now working for stickers (sheet No. 192375) but I haven't built the model itself.
Please go ahead.

Great news ! I hadn't begun work on these stickers yet (in fact the only stickers I have begun are those of set 6371).
I'm going to focus on the 6375 Exxon Station for the days to come and upload it (without stickers, at first) as soon as it's ok.

[Jeremie Guillaume]

Regarding part 3062, I think there were both molds (3062a and 3062b) exist concurrently in those years (around 1978).

I think you're right on this one, I believe there was some variation among different production batches for some sets (another example is the astronaut helmet - 3842a or 3842b - of classic space minifigs). I'm not an expert on this subject though... Up to now I've used the rebrickable parts lists as a reference, since I understood it is quite reliable (any advice or opinion someone?)

[N. W. Perry]

It's a nice surprise.  And stickers already exist !! (on my side I began making this one only very recently, so I hadn't checked yet for their existence in the library).
I think you should OMRize it for inclusion in the OMR
One possible enhancement would be to make separate LDR's for the four corner baseplates, which are intended to rotate and allow opening one entire side or the other of the castle. That would make using that feature of the original model easier IMO.

To be honest I'd just assumed the castle was already in the OMR! But at some point I might get around to OMRizing it; at that point, I would typically put the rotating sections into LDCad groups rather than submodels (since I use submodels to reflect the build process and match the instructions).

[Takeshi Takahashi]

Great news ! I hadn't begun work on these stickers yet (in fact the only stickers I have begun are those of set 6371).
I'm going to focus on the 6375 Exxon Station for the days to come and upload it (without stickers, at first) as soon as it's ok.

Stickers (12pieces) completed and now on PT!!

[Takeshi Takahashi]

Fixed some errata, and used 3062a instead of 3062b.
Thanks Jeremie for review.

Set: 374-1 Fire Station
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51


  374-1 - Fire Station.mpd (Size: 84.52 KB / Downloads: 8)
   

EDIT 2022-03-20: Split movable sections to submodels, inlined unofficial stickers (all of them reached all-but-admin-cert)

[Takeshi Takahashi]

Fixed some errata, and used 3062a instead of 3062b.
Thanks Jeremie for review.

640-2 - Fire Truck and Trailer
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51


  640-2 - Fire Truck and Trailer.mpd (Size: 3.8 KB / Downloads: 6)
   

[Jeremie Guillaume]

Stickers (12pieces) completed and now on PT!!

Nice work on stickers, they're great!
Here's the station, hope you like it :

   

  6375-2 - Exxon Gas Station.mpd (Size: 197.46 KB / Downloads: 13)

Complete : yes (thanks to the stickers by Takeshi!)
OMR compliant : yes (stickers inlined)

[Willy Tschager]

617 - Cowboys

   

  617 - Cowboys.mpd (Size: 2.65 KB / Downloads: 4)

Known errors: None
Done with: LDCad 1.6d

[Willy Tschager]

697 - Stagecoach

   

  697 - Stagecoach.mpd (Size: 5.06 KB / Downloads: 4)

OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d

Note: With this the LEGOLand Western series is complete (and luckily I own them all ... obviously MISB).

w.

[Takeshi Takahashi]

Thanks for review and correction.
The trans-clear 3010/3622s you mentioned are confirmed to be misplaced, so I've fixed them.


  1589 - Main Street.mpd (Size: 26.33 KB / Downloads: 8)
   

Currently not OMR conform (unofficial stickers not inlined)
Missing items: flexible rope

[Willy Tschager]

664 - TV Crew

   

  664 - TV Crew.mpd (Size: 9.54 KB / Downloads: 4)

OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d

Note: Sticker ready for review at the PT

Sticker  1.7 x  1.7 with White "TV2" on Blue Background
Sticker  1 x  1 with White "TV2" on Blue Background

The original sticker sheet can be found here:

https://www.bricklink.com/v2/catalog/cat...P=664stk01

[Takeshi Takahashi]

  375-2 - Castle.mpd (Size: 44.97 KB / Downloads: 7)
   

OMR conform
Missing items: flexible rope

[Takeshi Takahashi]

  383-2 - Knight's Joust.mpd (Size: 14.55 KB / Downloads: 6)
   

OMR conform
Missing items: none

[Takeshi Takahashi]

  677-1 - Knight's Procession.mpd (Size: 3.63 KB / Downloads: 7)
   

OMR conform
Missing items: none

[N. W. Perry]

Missing items: flexible rope

I posted a version somewhere that has the string.

[Willy Tschager]

I posted a version somewhere that has the string.

Sure you did: https://forums.ldraw.org/thread-22660-po...l#pid41489

Since this came with two set numbers I suggest that you ask Johann to add them both with your credentials, but first it would be nice if you could OMRize them and subfile + inline the unofficial parts.

BTW I always like some drama in the presentation. 6075 already comes with the minifigs positioned as in the BI. 375 could use the box art?



w.

[Takeshi Takahashi]

Oops, I've missed set 6075-2 has been submitted, sorry.
Please go ahead with Nathan's model for both 375-2 and 6075-2.

The parts (including stickers) are all official, so no inlining unofficial parts is needed I think.
(Some stickers are updated on PT, but they will be automatically reflected once they got official!)

[N. W. Perry]

Oops, I've missed set 6075-2 has been submitted, sorry.
Please go ahead with Nathan's model for both 375-2 and 6075-2.

The parts (including stickers) are all official, so no inlining unofficial parts is needed I think.
(Some stickers are updated on PT, but they will be automatically reflected once they got official!)

The string would be the unofficial part—I guess you'd have to inline the LSynth donors? Honestly I haven't OMRized anything with LSynth before. But if anyone wanted to use the string in an otherwise-OMRized file, that would be fine!

[Takeshi Takahashi]

The string would be the unofficial part—I guess you'd have to inline the LSynth donors? Honestly I haven't OMRized anything with LSynth before. But if anyone wanted to use the string in an otherwise-OMRized file, that would be fine!

Yes, the string created by LSynth will be unofficial part, so inlining is needed.

[N. W. Perry]

Yes, the string created by LSynth will be unofficial part, so inlining is needed.

If I ever get around to OMRizing this model, I would convert the string to an LDCad-generated one. (More accurately, I'd re-build it from scratch, but I still use the donor parts from LSynth since they give more of a visual texture than a simple cylinder.) But in the meantime, it's there and available if anyone needs it!

[Willy Tschager]

I have the yellow castle:


It's an older file, done in Bricksmith using LSynth, and not OMR-compliant, but perfectly usable.

  6075 - Classic Castle.mpd (Size: 146.08 KB / Downloads: 6)

I OMRized the file. No other modifications were done.

w.

[Willy Tschager]

Added string and a bit of drama

   

  375-2 - Classic Castle.mpd (Size: 127.46 KB / Downloads: 9)

[Takeshi Takahashi]

Added string and a bit of drama

Thanks very much for improving the model, Willy.
So nice and I like it!!

[Jeremie Guillaume]

Hi Takeshi,
There was still a glass not correctly snapped   (the one just behind the bus driver)
Furthermore, I think the stickers of the building would be better if they are included in the building ldr ? (just a suggestion of course, but IMHO it's better that way)
I made these two changes in the file below:

  379-1 - Bus Station.mpd (Size: 12.06 KB / Downloads: 4)

[Jeremie Guillaume]

Takeshi,
Apparently the saddle of the black horse isn't black, but red (I checked inventories on rebrickable and peeron, as well as the building instructions...).
Here is the resulting mpd:
  383-2 - Knight's Joust.mpd (Size: 14.55 KB / Downloads: 4)

[Jeremie Guillaume]

Hello Willy,

I really like the horses

From what I see in the instructions of the set (I checked carefully), it seems to contain no 3710 part but only 3023's.
(the inventories on peeron and rebrickable disagree on this, anyway).

So I replaced your two 3710 by four 3023, IMHO this is the right version:  
  697 - Stagecoach.mpd (Size: 5.15 KB / Downloads: 4)

[Jeremie Guillaume]

Set 585 "Police headquarters"

   

  585 - Police Headquarters.mpd (Size: 14.72 KB / Downloads: 7)

OMR conform, no missing item.

[Jeremie Guillaume]

Added the flexible rope (from work already done for set 670).

   
  1589 - Main Street.mpd (Size: 77.14 KB / Downloads: 6)

Currently not OMR conform (unofficial stickers not inlined, same as above)

[Jeremie Guillaume]

Added the flexible rope (from work already done for set 670).
BTW, added the building steps and corrected the placement order of a few parts.

   


  1620-2 - Chocolate Factory.mpd (Size: 62.46 KB / Downloads: 6)

[Takeshi Takahashi]

Updated: Added missing stickers and corrected misplaced parts


  390-2 - 1913 Cadillac.mpd (Size: 9.74 KB / Downloads: 5)
   

Currently not OMR compliant (Unofficial sticker not inlined)
Missing items: none

This set is the origin of Model Team and Creator Expert!!

[Willy Tschager]

   

  645-2 - Milk Float & Trailer.mpd (Size: 3.02 KB / Downloads: 5)

Set: 645-2 - Milk Float & Trailer
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d

w.

[Takeshi Takahashi]

  391-1 - 1926 Renault.mpd (Size: 10.89 KB / Downloads: 5)
   

Currently not OMR compliant (Unofficial sticker not inlined)
Missing items: none

[Takeshi Takahashi]

Updated: Added missing stickers and corrected misplaced parts

This set has two versions according to Bricklink and Peeron:
Early version (with ungrooved tiles 3068a, gear wheels 569/574)
Late version (with grooved tiles 3068b, rim wheels 3482/3634)


  392-1 - Formula 1 (Early).mpd (Size: 10.33 KB / Downloads: 4)

  392-1 - Formula 1 (Late).mpd (Size: 9.77 KB / Downloads: 4)
   

[Takeshi Takahashi]

  393-1 - Norton Motorcycle.mpd (Size: 6.86 KB / Downloads: 4)
   

Currently not OMR compliant (unofficial stickers not inlined)
Missing items: none

[Takeshi Takahashi]

  394-1 - Harley-Davidson 1000cc.mpd (Size: 7.4 KB / Downloads: 4)
   

Currently not OMR compliant (unofficial stickers not inlined)
Missing items: none

[Takeshi Takahashi]

Updated: Added missing stickers and corrected misplaced parts


  395-1 - 1909 Rolls-Royce.mpd (Size: 13.72 KB / Downloads: 4)
   

Currently not OMR compliant (Unofficial sticker not inlined)
Missing items: none

[Takeshi Takahashi]

The final and largest set for Hobby Set theme, later re-released as "Legends" in 2003 (with replacing some discontinued parts)

  398 - U.S.S. Constellation.mpd (Size: 44.25 KB / Downloads: 6)
   

OMR compliant
Missing items: flexible ropes

[Jeremie Guillaume]

Set 361 - Tea Garden Café with Baker's Van

   

  361 - Tea Garden Café with Baker's Van.mpd (Size: 35.51 KB / Downloads: 7)

OMR compliant (unofficiel stickers inlined)
No missing item

Thanks Takeshi for stickers !

[Jeremie Guillaume]

Set 6371 - Shell Service Station

   

  6371 - Shell Service Station.mpd (Size: 96.47 KB / Downloads: 8)

OMR compliant (unofficiel stickers inlined)
No missing item

Thanks Takeshi for the stickers !

[Takeshi Takahashi]

Set 6371 - Shell Service Station




OMR compliant (unofficiel stickers inlined)
No missing item

Thanks Takeshi for the stickers !

Thanks, very nice model!!
As this set was released in 1983, the thread below should be more appropriate:
https://forums.ldraw.org/thread-22121.html

[Jeremie Guillaume]

Oh yes, you're right - my mistake. I'll have to think about this the next time I post a set.
No problem if a moderator wants / can move this one to the right thread..

[N. W. Perry]

218 - Firemen
(USA set no.: 340)
1977

Featuring the new maxifig fire helmet by Philo. :-) Studio render will have to wait until I can convert the texmapped maxifig faces. (Can't find Lasse's converter at the moment…unless someone knows a better way?) Studio render is also done now.

   
   

  218 - Firemen.mpd (Size: 174.6 KB / Downloads: 5)

OMR compliant: Yes
Errors: None
String?: Yes! What else do you suppose took me so long… 
Done with LDCad 1.7 alpha 1

[Philippe Hurbain]

218 - Firemen
(USA set no.: 340)
String?: Yes! What else do you suppose took me so long… 

Great 😃
The knot looks especially good!

[N. W. Perry]

Great 😃
The knot looks especially good!

You noticed.

I've added a Studio render to the original post. I ended up having to just re-make the maxifig faces in Part Designer, but this gave me an opportunity to slightly improve on the LDraw version by removing the .2 LDU overlap on the texture halves in p02 and p05 and stitching the PNG together in GIMP instead. (The p04 texture is already a two-halved image since it's asymmetric.)

[Marc Giraudet]

338 and 373-2 Ambulance

   
   


  338 - Ambulance.mpd (Size: 3.96 KB / Downloads: 3)

  373-2 - Ambulance.mpd (Size: 3.62 KB / Downloads: 3)

Files OMR compliant.
Known issues or missing parts : None.