1970's - LEGOland and hobby sets


1970's - LEGOland and hobby sets
#1
for good start OMR version of models by juraj3579 ...


Models by juraj3579, OMRized by me and published under CCAL v2 license with permission from author.
Quote:316 - Fire Fighter Ship [Legoland, 1978]

[Image: 316%20-%20Fire%20Fighter%20Ship.png]

316 - Fire Fighter Ship.mpd

Errors: missing stickers


390-2 - 1913 Cadillac [Hobby Set, 1975]

[Image: 390-2%20-%201913%20Cadillac.png]

390-2 - 1913 Cadillac.mpd

Errors: none


392 - Formula 1 [Hobby Set, 1975]

[Image: 392%20-%20Formula%201.png]

392 - Formula 1.mpd

Errors: none


395 - 1909 Rolls-Royce [Hobby Set, 1976]

[Image: 395%20-%201909%20Rolls-Royce.png]

395 - 1909 Rolls-Royce.mpd

Errors: none
Reply
RE: 1970's - legoland and hobby set
#2
Oh, no Thatcher Perkins my favourite Hobby Set?

w.
LEGO ergo sum
Reply
RE: 1970's - legoland and hobby sets
#3
396 - Thatcher Perkins

   

.mpd   396 - Thatcher Perkins.mpd (Size: 153.13 KB / Downloads: 12) (OMR compliant)
Known errors: None
Done with: LDCad 1.6b
LEGO ergo sum
Reply
RE: 1970's - legoland and hobby sets
#4
   

.mpd   358 - Rocket Base.mpd (Size: 16.11 KB / Downloads: 6)
358 - Rocket Base

Made the .mpd long time ago. It should be OMR conform regarding to MPD-Center. This is my first submission so I hope everything is correct.
358 was my first set back then.

Oliver
Reply
RE: 1970's - legoland and hobby sets
#5
(2019-03-15, 16:23)Oliver Dammann Wrote: 358 - Rocket Base

MY FIRST SET! Got it for my fifth birthday. Still remember the room where I build it. Remember also that I needed mom's help to find one of the red Brick Round 1x1.

w.
LEGO ergo sum
Reply
RE: 1970's - legoland and hobby sets
#10
(2019-03-15, 16:23)Oliver Dammann Wrote: 358 - Rocket Base

Made the .mpd long time ago. It should be OMR conform regarding to MPD-Center. This is my first submission so I hope everything is correct.
358 was my first set back then.

Oliver
Probably my first "space" set. Good job.
May I suggest some corrections. Blush
The turntable is not with a square base. The red/white antenna is too long. The 2 last blue 1x4 brick at the top of the stand overlap.
Vehicule not displayed on the main vue. On the vehicule, tyres are normaly dual. Use "rubber black" color instead of "black" for better rendering.
If you don't understand my english, that's normal, me too !
Reply
RE: 1970's - legoland and hobby sets
#6
   

.mpd   365 - Wild West Scene.mpd (Size: 661.18 KB / Downloads: 12)

Set: 365 - Wild West Scene
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6b
Notes: Missing in the LEGO House History Collection - what a shame
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#7
367 - Moon Landing

   


.mpd   367 - Moon Landing.mpd (Size: 37.64 KB / Downloads: 5)

Known errors: None
Done with: LDCad 1.6c
Notes: This comes 55 days too late - sorry for that!
LEGO ergo sum
Reply
RE: 70's - LEGOland and hobby sets - 601-2 - Tow Truck
#8
Photo 
[color=#333333][font=Tahoma,Verdana,Arial,Sans-Serif]Set:[/font][/color][color=#333333][font=Tahoma,Verdana,Arial,Sans-Serif] 601-2 - [/font][/color][color=#333333][font=Tahoma,Verdana,Arial,Sans-Serif]Tow Truck[/font][/color]
Probably one of my first set. First contribution to OMR.

Known errors: None
[color=#333333][font=Tahoma,Verdana,Arial,Sans-Serif]OMR Compliant: Yes[/font][/color]


Attached Files Thumbnail(s)
   

.mpd   601-2 - Tow Truck.mpd (Size: 1.41 KB / Downloads: 8)
Reply
RE: 1970's - LEGOland and hobby sets - 689 - Truck and Shovel
#9
Photo 
Set : 689 - Truck and Shovel

   

.mpd   689 - Truck and Shovel.mpd (Size: 3.63 KB / Downloads: 6)

Known errors : None
OMR compliant : Yes
Reply
RE: 1970's - LEGOland and hobby sets - 346-2 - House with Car
#11
Photo 
Set 346-2 - House with Car

   

.mpd   346-2 - House with Car.mpd (Size: 8.17 KB / Downloads: 9)

OMR Compliant: Yes
Known errors: One pine tree missing
Reply
RE: 1970's - LEGOland and hobby sets
#12
(2019-11-22, 21:03)Marc Giraudet Wrote: Set 346-2 - House with Car
Sets from my childhood.... (well, late childhood actually). I really should have a try to make the flat pine tree!
Reply
RE: 1970's - LEGOland and hobby sets
#13
(2019-11-23, 8:49)Philippe Hurbain Wrote: Sets from my childhood.... (well, late childhood actually). I really should have a try to make the flat pine tree!
An other raison to make the flat pine tree !
As you can see on the picture, white dots are visible on baseplate.  It's why i propose a new version for 10p04.

[attachment=4257]

[attachment=4258]
MPD file not OMR compliant

May bee you can explain how make file OMR compliant when non official parts are included.
If you don't understand my english, that's normal, me too !
Reply
RE: 1970's - LEGOland and hobby sets
#16
(2019-11-23, 15:33)Marc Giraudet Wrote: May bee you can explain how make file OMR compliant when non official parts are included.
I use Cleanup.. option in LDCad.
Just OMRized this file, will be soon in the OMR.


Ich verwende die Option Cleanup .. in LDCad.
Gerade OMRized diese Datei, wird bald in der OMR sein.
If nothing goes right, go left.
Reply
RE: 1970's - LEGOland and hobby sets - 4886 - Building Bonanza
#15
4886 - Building Bonanza - Advanced Build.
Quick and Experienced are already in OMR but not this one ?

   


.mpd   4886 - Building Bonanza - Advanced Build.mpd (Size: 29.57 KB / Downloads: 14)

Big 346-2  Wink

OMR compliant : Yes
If you don't understand my english, that's normal, me too !
Reply
RE: 1970's - LEGOland and hobby sets - 349 - Swiss Chalet
#14
349 - Swiss Chalet

   

.mpd   349 - Swiss Chalet.mpd (Size: 4.3 KB / Downloads: 13)

Known errors : Granulated pine tree missing
OMR compliant : Yes
If you don't understand my english, that's normal, me too !
Reply
RE: 1970's - LEGOland and hobby sets
#17
   

.mpd   364 - Harbour Scene.mpd (Size: 259.31 KB / Downloads: 11)

Set: 364 - Harbour Scene
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6c, MLCad 3.5, LSynth 3.1

This set required a few parts fo be authored:


.png   u572p02.png (Size: 13.82 KB / Downloads: 731) Baseplate 60 x 68 Cardboard with Harbour Scene Pattern

.png   004488a.png (Size: 9.47 KB / Downloads: 721) Sticker  1 x  4.5 with Black "TRANSPORT" Sign on Yellow Background

.png   004488b.png (Size: 8.38 KB / Downloads: 715) Sticker  1.1 x  5.1 with Black "COMPANY" Sign on Red Background

.png   004488c.png (Size: 7.2 KB / Downloads: 713) Sticker  1 x  6 with White "POLICE" Sign on Blue Background

.png   004488d.png (Size: 8.74 KB / Downloads: 710) Sticker  1.2 x  6.6 with Black "M/S UNION" Sign on Red Background

.png   004488e.png (Size: 11.67 KB / Downloads: 715) Sticker  2.3 x  2.3 Round with Lifepreserver Pattern

.png   004488f.png (Size: 5.11 KB / Downloads: 704) Sticker  1.1 x  3 with  3 Black Spots on White Background

.png   004488g.png (Size: 8.23 KB / Downloads: 720) Sticker  1.5 x  1.6 with Black Anchor on Red Background
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#18
Hello, everyone.
As this is my first submission, I hope that it satisfies OMR requirements.
I've checked that it is OMR conform through MPDCenter 2.5.0.0.

I remember I enjoyed very much playing with fire station sets in my childhood (about 25-30 years ago),
with set 6385, 6389 and 6571.

Set: 374-1 - Fire Station
OMR Compliant: Yes
Known errors: Missing stickers
Done with: MLCad 3.51
Reply
RE: 1970's - LEGOland and hobby sets
#19
(2020-04-14, 15:32)Takeshi Takahashi Wrote: Set: 374-1 - Fire Station
...made a quick render Wink


Attached Files Thumbnail(s)
   
Reply
RE: 1970's - LEGOland and hobby sets
#21
(2020-04-14, 18:41)Philippe Hurbain Wrote: ...made a quick render Wink

Thank you Philo.
While the US version (set 590) and almost all of later fire station sets (6382, 6385, 6389, 6571,... through today's 60215) have red buildings, this building is yellow and looks rather fresh for me. Smile
Reply
RE: 1970's - LEGOland and hobby sets
#20
(2020-04-14, 15:32)Takeshi Takahashi Wrote: Hello, everyone.
As this is my first submission, I hope that it satisfies OMR requirements.
I've checked that it is OMR conform through MPDCenter 2.5.0.0.

I remember I enjoyed very much playing with fire station sets in my childhood (about 25-30 years ago),
with set 6385, 6389 and 6571.

Set: 374-1 - Fire Station
OMR Compliant: Yes
Known errors: Missing stickers
Done with: MLCad 3.51

Most of these stickers do exist in the library, BTW (some are unofficial and would have to be inlined). Everything except the textual ones ("1", "2" and "Fire Station" in various languages).
Reply
RE: 1970's - LEGOland and hobby sets
#22
(2020-04-14, 20:21)N. W. Perry Wrote: Most of these stickers do exist in the library, BTW (some are unofficial and would have to be inlined). Everything except the textual ones ("1", "2" and "Fire Station" in various languages).

Thank you for your advice.
As this is my first work on LDraw, made about 4 years ago (recently OMRized and submitted to this forum), I haven't noticed the sticker parts.

I found some stickers in official library
* Fire emblem (for the vehicles)
* Firefighting wear (for the minifigs)
and one in parts tracker (currently unofficial)
* Clock (for the building)

Here is the updated version with official stickers.
Since the unofficial clock sticker uses a TEXMAP image, it cannot be included in a MPD file.
When the sticker is accepted as an official parts, the model will be updated.
Reply
RE: 1970's - LEGOland and hobby sets
#77
Finally completed this set!!

Set: 374-1 Fire Station
OMR Compliant: Currently no (Unofficial stickers not inlined)
Known errors: none
Done with: MLCad 3.51



.mpd   374-1 - Fire Station.mpd (Size: 20.36 KB / Downloads: 4)
   
Reply
374-1 - Fire Station
Fixed some errata, and used 3062a instead of 3062b.
Thanks Jeremie for review.

Set: 374-1 Fire Station
OMR Compliant: Currently no (Unofficial stickers not inlined)
Known errors: none
Done with: MLCad 3.51


.mpd   374-1 - Fire Station.mpd (Size: 20.36 KB / Downloads: 3)
   
Reply
RE: 1970's - LEGOland and hobby sets
#23
Set: 377-1 - Shell Service Station

OMR Compliant: Yes

Known errors: noneMissing flexible parts (Strings for fuel hoses)

Done with: MLCad 3.51

For this set, all of stickers can be found in the official parts library.

(Updated in the reply: created flexible strings)
Reply
RE: 1970's - LEGOland and hobby sets
#39
(2020-04-16, 13:57)Takeshi Takahashi Wrote: Known errors: Missing flexible parts (Strings for fuel hoses)

You could use LSynth to generate the strings. See:

https://forums.ldraw.org/thread-22660-po...l#pid36540

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#40
(2020-04-23, 19:47)Willy Tschager Wrote: You could use LSynth to generate the strings. See:

https://forums.ldraw.org/thread-22660-po...l#pid36540

w.

LDCad is far superior for this.
Reply
RE: 1970's - LEGOland and hobby sets
#60
(2020-04-23, 19:54)Orion Pobursky Wrote: LDCad is far superior for this.

Updated, with creating flexible hose by LSynth (Missing invisible knots).
I wonder how to make the hose thicker as a real part.


.mpd   377-1 - Shell Service Station.mpd (Size: 24.03 KB / Downloads: 7)
   
Reply
RE: 1970's - LEGOland and hobby sets
#61
(2020-12-31, 13:09)Takeshi Takahashi Wrote: Updated, with creating flexible hose by LSynth (Missing invisible knots).
I wonder how to make the hose thicker as a real part.

I use the LSynth LS60 segment in my own LDCad string template (it looks more like real string than the cylindrical donors that come with LDCad). You can easily scale them in X and Z to make the string thicker or thinner, by changing the rotation matrix in the path skin dialog.
Reply
RE: 1970's - LEGOland and hobby sets
#24
Set: 601-1 - Shell Filling Station

OMR Compliant: Yes

Known errors: Missing a part (x454pb01), Missing a flexible part(Strings for fuel hoses)

Done with: MLCad 3.51



Part x454pb01 (Road Sign Cantilever Curved with Shell Logo Print) is not available and I have used the closest part 764 as the alternative.
[attachment=5115]
Reply
RE: 1970's - LEGOland and hobby sets
#25
(2020-04-19, 14:34)Takeshi Takahashi Wrote: Part x454pb01 (Road Sign Cantilever Curved with Shell Logo Print) is not available and I have used the closest part 764 as the alternative.
Looks like you have just found your next part project Big Grin

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#26
(2020-04-19, 19:37)Willy Tschager Wrote: Looks like you have just found your next part project Big Grin

Unfortunately, the part will need to be (almost) newly authored as the pole is slanted, not upright (as part 764).

https://www.bricklink.com/v2/catalog/cat...ted%5D#T=C

The part here seems to be bent due to aging degradation (?)
https://rebrickable.com/parts/x454pb01/r...ogo-print/
but the related part (only in difference of pattern) looks good.
https://rebrickable.com/parts/107pr0002/...ice-print/
Reply
RE: 1970's - LEGOland and hobby sets
#27
(2020-04-20, 4:15)Takeshi Takahashi Wrote: Unfortunately, the part will need to be (almost) newly authored as the pole is slanted, not upright (as part 764).
Parts look similar enough so that a slanting transformation applied to the pole could do the trick... (see https://jc-tchang.philohome.com/manuel/prim_def.htm - in French, use translate Wink )
Reply
RE: 1970's - LEGOland and hobby sets
#28
(2020-04-20, 7:58)Philippe Hurbain Wrote: Parts look similar enough so that a slanting transformation applied to the pole could do the trick... (see https://jc-tchang.philohome.com/manuel/prim_def.htm - in French, use translate Wink )

Thank you very much. I'll try it, but I have no real part of this and cannot measure the exact dimensions.
Is this allowed for LDraw parts library standard?
Reply
RE: 1970's - LEGOland and hobby sets
#29
(2020-04-20, 13:26)Takeshi Takahashi Wrote: Thank you very much. I'll try it, but I have no real part of this and cannot measure the exact dimensions.
Is this allowed for LDraw parts library standard?
For such a part that doesn't interact with others it is not a major problem to eyeball dimensions from photos!
Reply
RE: 1970's - LEGOland and hobby sets
#30
(2020-04-20, 13:26)Takeshi Takahashi Wrote: Thank you very much. I'll try it, but I have no real part of this and cannot measure the exact dimensions.
Is this allowed for LDraw parts library standard?

The best thing in this case is asking for photos, here an elsewhere, with standard bricks attached. See:

https://forums.ldraw.org/thread-23978.html

[Image: 6bAimZS.jpg]

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#31
(2020-04-20, 13:26)Takeshi Takahashi Wrote: Thank you very much. I'll try it, but I have no real part of this and cannot measure the exact dimensions.
Is this allowed for LDraw parts library standard?

The picture on Bricklink, see: https://www.bricklink.com/catalogItemIn.asp?P=x454pb01&colorID=1&in=A
is excellent for getting the proportions relatively right. Since this part only came in 2 sets, and is extremely rare, I doubt there would be much objections against this. But try to submit it and see what the reviews say.
Reply
RE: 1970's - LEGOland and hobby sets
#32
Thank you everyone.
I'll take it easy as the part connects others only on the bottom and is very rare.

The photo of the part with different pattern on here;
https://www.bricklink.com/v2/catalog/cat...5D#T=C&C=1
looks very helpful to build 3D model.
The pole is a little more than 8 studs (160 LDU) or 7 bricks (168 LDU) high, and the slant amount is almost exact to 1 stud (20 LDU), aligning the edges of sign board and base in line.
And it has third support beam near the lower corner on the board.

I'd like to try it!!
Reply
RE: 1970's - LEGOland and hobby sets
#64
I've created the missing signboard u454p01 and hose (copied from set 377).

This is a fit check (not OMR conform), and I'll inline them after the part is certified.


.mpd   601-1 - Shell Filling Station.mpd (Size: 14.66 KB / Downloads: 4)
   
Reply
RE: 1970's - LEGOland and hobby sets
#33
Set: 604-1 - Shell Service Car
OMR Compliant: Yes
Known errors: None
Done with: MLCad 3.51
   


Attached Files
.mpd   604-1 - Shell Service Car.mpd (Size: 2.37 KB / Downloads: 7)
Reply
RE: 1970's - LEGOland and hobby sets
#34
Set: 606-1 - Ambulance
OMR Compliant: Yes
Known errors: None
Done with: MLCad 3.51

Updated: I've made the missing sticker 004363a (submitted and certified on PT). The model is complete!!


.mpd   606-1 - Ambulance.mpd (Size: 4.21 KB / Downloads: 8)
   
Reply
RE: 1970's - LEGOland and hobby sets
#35
Set: 620-1 - Fire Truck
OMR Compliant: Yes
Known errors: None
Done with: MLCad 3.51
   


Attached Files
.mpd   620-1 - Fire Truck.mpd (Size: 2.95 KB / Downloads: 8)
Reply
RE: 1970's - LEGOland and hobby sets
#36
Set: 621-1 - Police Car
OMR Compliant: Currently no (Unofficial stickers not inlined)
Known errors: None
Done with: MLCad 3.51
   

Model updated with stickers!


Attached Files
.mpd   621-1 - Police Car.mpd (Size: 3.07 KB / Downloads: 9)
Reply
RE: 1970's - LEGOland and hobby sets
#37
Set: 622-1 - Tipper Truck
OMR Compliant: Currently no (Unofficial stickers not inlined)
Known errors: none
Done with: MLCad 3.51
   


Attached Files
.mpd   622-1 - Tipper Truck.mpd (Size: 2.23 KB / Downloads: 7)
Reply
RE: 1970's - LEGOland and hobby sets
#38
Set: 623-1 - Red Cross Car
OMR Compliant: Currently no (Unofficial stickers not inlined)
Known errors: none
Done with: MLCad 3.51
   


Attached Files
.mpd   623-1 - Red Cross Car.mpd (Size: 3.18 KB / Downloads: 7)
Reply
RE: 1970's - LEGOland and hobby sets
#41
   

.mpd   369 - Goast Guard Station.mpd (Size: 28.89 KB / Downloads: 4)

Set: 369 - Coast Guard Station
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#42
   

.mpd   371 - Seaplane.mpd (Size: 6.25 KB / Downloads: 4)

Set: 371 - Seaplane
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#43
   

.mpd   658-1 - Fire Engine.mpd (Size: 17.05 KB / Downloads: 6)

Set: 658 - Fire Engine
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#44
   

.mpd   699-1 - Photo Safari.mpd (Size: 19.96 KB / Downloads: 2)

Set: 699 - Photo Safari
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#45
   

My first contribution to OMR

Set: 6691 - Red Cross Helicopter
OMR Compliant: Maybe
Known errors: None
Done with: LDCad 1.6d


Attached Files
.mpd   6691 - Red Cross Helicopter.mpd (Size: 7.16 KB / Downloads: 6)
Reply
RE: 1970's - LEGOland and hobby sets
#46
Hi Jérôme,

welcome to the forums. I remember this set! Did you run your model through:

https://ldraw.heidemann.org/index.php?page=mpdcenter

The subfiles are missing a lot of information.

Have also a look on the minifigs which are floating in midair and the tail rotor which has a bit of overlap. There is also an empty subfile.

Have also a look on the 658 - Fire Engine I posted above and see how I arranged the subfiles in the main file to ease posing. To achieve this you would have to move the helicopter itself to a subfile and separate parts from the submodels and add:

* Shutters 3856.dat
* Tail rotor 3461.dat
* Roof 4213.dat

to the main file.

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#47
Set: 625-1 - Tractor Digger
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51

.mpd   625-1 - Tractor Digger.mpd (Size: 2.71 KB / Downloads: 4)
   
Reply
RE: 1970's - LEGOland and hobby sets
#48
Set: 640-2 Fire Truck and Trailer
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51


.mpd   640-2 - Fire Truck and Trailer.mpd (Size: 3.77 KB / Downloads: 5)
   
Reply
640-2 - Fire Truck and Trailer
Fixed some errata, and used 3062a instead of 3062b.
Thanks Jeremie for review.

640-2 - Fire Truck and Trailer
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51


.mpd   640-2 - Fire Truck and Trailer.mpd (Size: 3.8 KB / Downloads: 3)
   
Reply
RE: 1970's - LEGOland and hobby sets
#49
Set: 641-1 Excavator
OMR Compliant: Currently no (unofficial stickers not inlined)
Known errors: none
Done with: MLCad 3.51


.mpd   641-1 - Excavator.mpd (Size: 7.01 KB / Downloads: 3)
   
Update: Added stickers
Reply
RE: 1970's - LEGOland and hobby sets
#50
Set: 642-1 Tow Truck and Car
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51

.mpd   642-1 - Tow Truck and Car.mpd (Size: 2.75 KB / Downloads: 3)
   
Reply
RE: 1970's - LEGOland and hobby sets
#51
I've updated 606-1 Ambulance with complete state.
623-1 Red Cross Car will follow, when sticker 004762a is certified.
Reply
RE: 1970's - LEGOland and hobby sets
#52
Set: 670-1 Mobile Crane
OMR Compliant: Yes
Known errors: Missing stickers (Danger stripes on vehicle body), Missing flexible string
Inlined unofficials: 004656a (on PT, admin certified)
Done with: MLCad 3.51

This model is built several years ago and cleaned up just now.
Of course creating flexible items and any other improvements are welcomed.


.mpd   670-1 - Mobile Crane.mpd (Size: 7.67 KB / Downloads: 4)
   
Reply
RE: 1970's - LEGOland and hobby sets
#56
(2020-11-15, 12:44)Takeshi Takahashi Wrote: Set: 670-1 Mobile Crane
OMR Compliant: Yes
Known errors: Missing stickers (Danger stripes on vehicle body), Missing flexible string
Inlined unofficials: 004656a (on PT, admin certified)
Done with: MLCad 3.51

This model is built several years ago and cleaned up just now.
Of course creating flexible items and any other improvements are welcomed.

Indeed, ropes and strings are critical to many of the models from this era. Perhaps none less so than this one. :-)

LDCad can handle them of course, but they are fiddly and take a long time to build, at least if you're going for a great deal of accuracy. I've been working at things like pre-made knots and spools, etc., but I find that these differ almost with each different model. Wish there were a better way to automate them!
Reply
RE: 1970's - LEGOland and hobby sets
#57
(2020-11-20, 19:20)N. W. Perry Wrote: Indeed, ropes and strings are critical to many of the models from this era. Perhaps none less so than this one. :-)

LDCad can handle them of course, but they are fiddly and take a long time to build, at least if you're going for a great deal of accuracy. I've been working at things like pre-made knots and spools, etc., but I find that these differ almost with each different model. Wish there were a better way to automate them!

I agree that the flexible ropes and hoses have very important roles in these models.
I'm now learning the use of LDCad including building flexible parts, to migrate from MLCad getting out-of-date.
The knots and spools are so difficult for me currently (authoring patterned tiles or bricks is far easier than them!!),
but I'll try to create them beginning from an update for set 377.
Reply
RE: 1970's - LEGOland and hobby sets
#59
(2020-11-22, 7:57)Takeshi Takahashi Wrote: I agree that the flexible ropes and hoses have very important roles in these models.
I'm now learning the use of LDCad including building flexible parts, to migrate from MLCad getting out-of-date.
The knots and spools are so difficult for me currently (authoring patterned tiles or bricks is far easier than them!!),
but I'll try to create them beginning from an update for set 377.

You can create cap parts for things like common knots (if you don't want to model the knot itself, a sphere primitive can be a good approximation), and you could do the same with a single spool loop (or even a whole course of them, if you need a full spool). But I think it would be cool to have an automated spooling script, similar to how spring part meshes are generated.
Reply
RE: 1970's - LEGOland and hobby sets
#79
Hello Takeshi,

Here is the string I made for this nice 670 set. I think it's not too bad... Hope you'll like it Smile

   


.mpd   670-1 - Mobile Crane.mpd (Size: 68.74 KB / Downloads: 6)

Made with LDCad the instructions found on JC Tchang's site about how to make a string with the LS60 LSynth part (inlined in the mpd). And quite some time playing with Bezier curves while taking a real-world knot as a reference...

You'll see I fixed three minor glitches, too:
- two 3020's were inverted among building steps
- the crane was vertically overlapping the truck by 8 LDUs
- the red block was lower than (invisible) ground

Finally I couldn't resist but put the stickers... but of course, thanks must go to yourself for having created two of those (BTW I'm impressed by the large numbers of stickers you submitted recently on the PT, great work !)
Reply
RE: 1970's - LEGOland and hobby sets
#80
Great collaborative work on this one Wink
I'm especially fond of rope knot!
Reply
RE: 1970's - LEGOland and hobby sets
#82
Thanks very much for improving the model!

I've written the !HISTORY line for update log.

.mpd   670-1 - Mobile Crane.mpd (Size: 68.91 KB / Downloads: 1)
Reply
RE: 1970's - LEGOland and hobby sets
#81
You might have a look on what I did on 364:

http://omr.ldraw.org/files/1450

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#53
Set: 643-1 Flatbed Truck
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51


.mpd   643-1 - Flatbed Truck.mpd (Size: 2.8 KB / Downloads: 4)
   
Reply
RE: 1970's - LEGOland and hobby sets
#54
Set: 644-2 Police Mobile Patrol
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51


.mpd   644-2 - Police Mobile Patrol.mpd (Size: 3.46 KB / Downloads: 2)
   
Reply
RE: 1970's - LEGOland and hobby sets
#55
Set: 671-1 Shell Petrol Tanker
OMR Compliant: Currently no (not inlined unofficial stickers)
Known errors: none
Done with: MLCad 3.51

.mpd   671-1 - Shell Petrol Tanker.mpd (Size: 12.47 KB / Downloads: 7)
   

Updated with creating stickers and flexible rope.
Reply
RE: 1970's - LEGOland and hobby sets
#58
(2020-11-20, 13:42)Takeshi Takahashi Wrote: Known errors: Missing flexible hose (rope)

Check out:

http://omr.ldraw.org/files/1210
http://omr.ldraw.org/files/1450

Done with LDCad or Synth

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#62
Set: 672-1 Fire Engine and Trailer
OMR Compliant: Yes
Known errors: Missing flexible hose (rope)
Done with: MLCad 3.51

I'll create the missing flexible hose rope...but unfortunately it will be invisible Sad

.mpd   672-1 - Fire Engine and Trailer.mpd (Size: 4.45 KB / Downloads: 4)
   
Reply
RE: 1970's - LEGOland and hobby sets
#63
Set: 673-1 Rally Car and Motorbike
OMR Compliant: Currently no (unofficial stickers not inlined)
Known errors: none
Done with: MLCad 3.51


.mpd   673-1 - Rally Car and Motorbike.mpd (Size: 5.17 KB / Downloads: 4)
   

Updated with stickers!
Reply
RE: 1970's - LEGOland and hobby sets
#65
Set: 621-2 - Shell Tanker Truck
OMR Compliant: Yes
Known errors: Substituted parts (3004p60 - "Brick 1 x 2 with Shell Logo I Pattern" instead of 3004px17 - "Brick 1 x 2 with Shell Logo II Pattern")
Done with: Studio 2.1.12(1) and MLCad 3.50
Notes: Wrong original instructions: there are three Bricks with the Shell logo, not two!

(Updated "Known errors")

   


.mpd   621-2 - Shell Tanker Truck.mpd (Size: 2.14 KB / Downloads: 5)
Reply
RE: 1970's - LEGOland and hobby sets
#66
Set: 344-1 Bungalow
OMR Compliant: Yes
Known errors: Substituted part: Tree 3471 instead of FTPineH(upn0401)
Done with: MLCad 3.51


In real world, removal of old tile 3068a must be some nightmare... Wink


Attached Files Thumbnail(s)
   

.mpd   344-1 - Bungalow.mpd (Size: 3.9 KB / Downloads: 2)
Reply
674-1 - Forklift and Truck
#67
Set: 674-1 Forklift and Truck
OMR Compliant: Yes
Known errors: Missing forklift spring
Done with: MLCad 3.51



.mpd   674-1 - Forklift and Truck.mpd (Size: 4.46 KB / Downloads: 6)
   
Reply
RE: 674-1 - Forklift and Truck
#68
Missing the spring.

w.
LEGO ergo sum
Reply
RE: 674-1 - Forklift and Truck
#69
(2021-03-27, 19:29)Willy Tschager Wrote: Missing the spring.

w.

Thanks, but I couldn't find no appropriate springs in official library or PT.
Reply
RE: 674-1 - Forklift and Truck
#70
(2021-03-27, 19:29)Willy Tschager Wrote: Missing the spring.

w.
Making a spring is not a very big issue (could probably be derived from https://www.ldraw.org/cgi-bin/ptdetail.c...181c01.dat), but where is it supposed to attach to the forklift parts???
Reply
RE: 674-1 - Forklift and Truck
#71
(2021-03-28, 14:31)Philippe Hurbain Wrote: Making a spring is not a very big issue (could probably be derived from https://www.ldraw.org/cgi-bin/ptdetail.c...181c01.dat), but where is it supposed to attach to the forklift parts???

Do you know the correct number of that spring? Could it be the same?
Reply
RE: 674-1 - Forklift and Truck
#72
(2021-03-28, 15:25)Magnus Forsberg Wrote: Do you know the correct number of that spring? Could it be the same?
The true question is - is there a spring??? Mechanism could simply rely on friction between 3430 and 3431... I see none on all photos I checked!
Reply
RE: 674-1 - Forklift and Truck
#73
Yes, it has.
I remember having one as a kid and it was a lot of fun shooting stuff in the air with the fork. Smile 
And the parts have hooks for a spring.
Reply
RE: 674-1 - Forklift and Truck
#74
(2021-03-28, 17:11)Magnus Forsberg Wrote: Yes, it has.
I remember having one as a kid and it was a lot of fun shooting stuff in the air with the fork. Smile 
And the parts have hooks for a spring.
Yes... https://www.bricklink.com/v2/catalog/cat...2#T=C&C=22
And advice in 3430 and so called "3429": 0 // Needs work: Spring attachment
I said so called because imho it's actually 3431!
Reply
RE: 674-1 - Forklift and Truck
#76
(2021-03-28, 17:44)Philippe Hurbain Wrote: Yes... https://www.bricklink.com/v2/catalog/cat...2#T=C&C=22
And advice in 3430 and so called "3429": 0 // Needs work: Spring attachment
I said so called because imho it's actually 3431!

Philo is right, this is one of the oldest misnumberings in LDRAW.

3429 is unknown, but definitely not the FORK-LIFT PLATFORM, it should be 3431. (3430 is correct as the FORK-LIFT STANDARD)

Note: 3429 is also definitely not the spring; which would have a 6xxx or 7xxxx numbering, owing to the fact that it is metal.
Reply
RE: 674-1 - Forklift and Truck
#75
(2021-03-28, 15:25)Magnus Forsberg Wrote: Do you know the correct number of that spring? Could it be the same?

It's definitely not the same spring.

70181 is from 1983 (for the newer, larger 73367 FORK-LIFT TRUCK), while 74603 FORK-LIFT TRUCK (the one being shown here) dates as far back as 1972.

Plus, I did some measurements for Philo at his request. Smile  

The older spring is actually of a larger diameter, and is shorter.

In addition to the spring, there are connection points missing from the platform and the standard for the spring to attach to.  I gave Philo some reference photos and suggestions (one could "cheat" and just use a cylinder at the top, even though the shape is more like a box with the top two edges rounded off. The peg on the platform is a lot more involved, if one wants to sweat the details.)
Reply
RE: 1970's - LEGOland and hobby sets
#78
   

.mpd   373 - Offshore Rig with Fuel Tanker.mpd (Size: 323.19 KB / Downloads: 3)

Known errors: None
Done with: LDCad 1.6d
Note: A set I wanted badly as a kid but newer got - now I have and in perfect shape. Love being an AFoL.
Hint: Stickers are at the PT ready to be reviewed

w.
LEGO ergo sum
Reply
1589 - Main Street
#83

.mpd   1589 - Main Street.mpd (Size: 25.79 KB / Downloads: 4)
   
Set: 1589 - Main Street
OMR Compliant: Yes
Known errors: Missing stickers, flexible rope
Done with: MLCad 3.51


As the flexible rope for crane has an important role for this set, I'd like to add it referring Willy and Jeremie's works.
Reply
RE: 1589 - Main Street
#85
Hi Takeshi,

Nice sets of that era! Will be perfect with your corresponding stickers when they become official parts Smile
I fixed a small glitch in 1589, at the back of the office ground floor (one 3665a and one 3660 were misplaced, and one 3005 had become a 3004; plus corrected the building steps).

Here's the fixed file:

.mpd   1589 - Main Street.mpd (Size: 25.8 KB / Downloads: 2)

Another point I noticed is the alternation of the transparent 3010's / 3622's on the right part of the bus stop. The instructions scans available on the net are not optimal, but apparently they should be in the 3010/3622 and 3622/3010 order alternately (which seems confirmed by the photo overviews of the set). I didn't change that though, not sure of what you'll decide
Reply
RE: 1589 - Main Street
Thanks for review and correction.
The trans-clear 3010/3622s you mentioned are confirmed to be misplaced, so I've fixed them.


.mpd   1589 - Main Street.mpd (Size: 26.33 KB / Downloads: 5)
   

Currently not OMR conform (unofficial stickers not inlined)
Missing items: flexible rope
Reply
RE: 1589 - Main Street
Added the flexible rope (from work already done for set 670).

   
.mpd   1589 - Main Street.mpd (Size: 77.14 KB / Downloads: 1)

Currently not OMR conform (unofficial stickers not inlined, same as above)
Reply
1620-2 - Chocolate Factory
#84

.mpd   1620-2 - Chocolate Factory.mpd (Size: 14.29 KB / Downloads: 6)
   

Set: 1620-2 - Chocolate Factory
OMR Compliant: Yes
Known errors: Flexible rope
Done with: MLCad 3.51

[EDIT 2021-07-26] Added missing stickers, corrected minifig position (Thanks Jeremie for review)
Reply
RE: 1620-2 - Chocolate Factory
Added the flexible rope (from work already done for set 670).
BTW, added the building steps and corrected the placement order of a few parts.

   


.mpd   1620-2 - Chocolate Factory.mpd (Size: 62.46 KB / Downloads: 1)
Reply
RE: 1970's - LEGOland and hobby sets
#86
   

.mpd   372 - Texas Rangers.mpd (Size: 103.9 KB / Downloads: 1)

Known errors: None
Done with: LDCad 1.6d
Hint: Stickers are at the PT ready to be reviewed
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#87
Nice model, as always with you Willy Smile
It's only recently, and thanks to LDraw, that I discovered this first version of the Minifigs.
On this one I find it particularly cute the way scarves are represented !
Reply
RE: 1970's - LEGOland and hobby sets
#88
Hello,

Here is sets 648 and 690.

I personnaly had the 690 during my childhood. Ldraw made me discover its ancestor the 648 Smile

   

.mpd   648 - Service Station.mpd (Size: 2.64 KB / Downloads: 1)

   

.mpd   690 - Shell Station.mpd (Size: 5.57 KB / Downloads: 4)


Thanks to Takeshi for the recently added parts - u454 slanted signpost and 1955 Shell Logo !

For the 690 I had to create the 8x22 baseplate (inlined), which from what I understood only existed for this specific set. I named it u568 (it was previously referenced as x568), is this correct ?

Files are OMR compliant, except for the fact they use the three unofficial parts below, currently in ACCN state on the Part Tracker:
  • u454p01.dat
  • u454p02.dat
  • 3004pt8.dat
Reply
RE: 1970's - LEGOland and hobby sets
#89
Thanks for making nice use of part u454!

I recommend you to submit u568 into parts tracker.
It's a nice part.
Reply
RE: 1970's - LEGOland and hobby sets
#90
(2021-05-18, 14:17)Takeshi Takahashi Wrote: I recommend you to submit u568 into parts tracker.
It's a nice part.
Yes, go for it!
Reply
RE: 1970's - LEGOland and hobby sets
#94
Part u568 submitted today on the parts tracker !
Reply
379-1 - Bus Station
#91

.mpd   379-1 - Bus Station.mpd (Size: 12.06 KB / Downloads: 5)
   

Set: 379-1 - Bus Station
OMR Compliant: Currently no (Unofficial stickers not inlined)
Known errors: none
Done with: MLCad 3.51

[EDIT 2021-07-07] Fixed window snap error, thanks Jeremie for review
Reply
RE: 379-1 - Bus Station
Hi Takeshi,
There was still a glass not correctly snapped Wink  (the one just behind the bus driver)
Furthermore, I think the stickers of the building would be better if they are included in the building ldr ? (just a suggestion of course, but IMHO it's better that way)
I made these two changes in the file below:

.mpd   379-1 - Bus Station.mpd (Size: 12.06 KB / Downloads: 1)
Reply
381-2 - Police Headquarters
#92

.mpd   381-2 - Police Headquarters.mpd (Size: 22.23 KB / Downloads: 5)
   

Set: 381-2 - Police Headquarters
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51

[EDIT 2021-07-07] Fixed misplaced spout, thanks Jeremie for review
Reply
RE: 381-2 - Police Headquarters
#93
(2021-05-24, 16:25)Takeshi Takahashi Wrote: Set: 381-2 - Police Headquarters

Never had this set as I was knee deep into Classic Space and there were just Christmas and birthday.

w.
LEGO ergo sum
Reply
RE: 381-2 - Police Headquarters
#95
(2021-05-24, 18:23)Willy Tschager Wrote: Never had this set as I was knee deep into Classic Space and there were just Christmas and birthday.

w.

Yes, classic space sets are also very nice and I like them.
This set 381 was released before I was born (in 1983) and my first police station set is 6386, so I've built this first time on LDraw!
I think this set is very well-designed for action playing with minifigs, and broad possibility for alternative builds (no STAMPs used).
Reply
607-1 - Mini Loader
#96

.mpd   607-1 - Mini Loader.mpd (Size: 2.36 KB / Downloads: 2)
   

Set: 607-1 - Mini Loader
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51
Reply
608-2 - Taxi
#97

.mpd   608-2 - Taxi.mpd (Size: 2.08 KB / Downloads: 2)
   

Set: 608-2 - Taxi
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51
Reply
645-1 - Police Helicopter
#98

.mpd   645-1 - Police Helicopter.mpd (Size: 3.87 KB / Downloads: 2)
   

Set: 645-1 - Police Helicopter
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51
Reply
646-1 - Auto Service
#99

.mpd   646-1 - Auto Service.mpd (Size: 3.47 KB / Downloads: 2)
   

Set: 646-1 - Auto Service
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51
Reply
RE: 1970's - LEGOland and hobby sets
All these sets are really cool, especially when decorated with their dedicated stickers Smile

I noticed a few glitches here and there - nothing very important but I think would be better if they're fixed
  • sets 640-2 and 374-1: the Minifig airtank (3838.dat) should be 2 LDU lower
  • set 379-1 : the 3853 (windows frames) and 3855b (windows glasses) aren't correctly snapped together, on all 7 occurences
  • set 381-2 : the 3496c01 spout overlaps the 3660 underneath by 8 LDUs
  • set 646: according to the instructions, the 3829c01 steering wheel should be yellow
Some other notes:
  • If I believe rebrickable.com as well as the instructions visuals, many of these sets have 3062a's (with solid stud) rather than 3062b's (with hollow stud); apparently the latter wasn't produced before 1978 anyway. This is particularly noticeable on the main picture of instructions for set 672-1, for example.
  • On two sets (372 and 1620), some Minifig are standing in the gap between two pairs of studs (and are overlapping them). Not sure whether this was intended or not (especially for 372 where this permits the Minifig to be in the center of the watchtower) ?

By the way, has someone begun work on sets 361, 375, 585, 6371, 6375-2 ? I have them (in various non-finished-yet state, especially for stickers) on my hard disk Smile
Reply
RE: 1970's - LEGOland and hobby sets
Thanks for reviewing the models!!
I'll fix my models.
They are built several years ago (before joining this community) and prepared for OMR recently, so some errors may exist.

Regarding part 3062, I think there were both molds (3062a and 3062b) exist concurrently in those years (around 1978).
As I (born in 1983 and begun playing LEGO system bricks in 1986) haven't seen a real-life 3062a, the transition should be rather fast.
Thus, I have modeled them with 3062b, except the sets before 1977 (pre-minifig era).
Reply
RE: 1970's - LEGOland and hobby sets
(2021-05-28, 12:58)Takeshi Takahashi Wrote: Regarding part 3062, I think there were both molds (3062a and 3062b) exist concurrently in those years (around 1978).

I think you're right on this one, I believe there was some variation among different production batches for some sets (another example is the astronaut helmet - 3842a or 3842b - of classic space minifigs). I'm not an expert on this subject though... Up to now I've used the rebrickable parts lists as a reference, since I understood it is quite reliable (any advice or opinion someone?)
Reply
RE: 1970's - LEGOland and hobby sets
(2021-05-27, 21:00)Jeremie Guillaume Wrote: By the way, has someone begun work on sets 361, 375, 585, 6371, 6375-2 ? I have them (in various non-finished-yet state, especially for stickers) on my hard disk Smile

I have the yellow castle:

.ldr   6075 Castle.ldr (Size: 133.52 KB / Downloads: 7)

It's an older file, done in Bricksmith using LSynth, and not OMR-compliant, but perfectly usable.
Reply
RE: 1970's - LEGOland and hobby sets
(2021-05-28, 16:36)N. W. Perry Wrote: I have the yellow castle:

It's a nice surprise.  And stickers already exist !! (on my side I began making this one only very recently, so I hadn't checked yet for their existence in the library).
I think you should OMRize it for inclusion in the OMR Wink
One possible enhancement would be to make separate LDR's for the four corner baseplates, which are intended to rotate and allow opening one entire side or the other of the castle. That would make using that feature of the original model easier IMO.
Reply
RE: 1970's - LEGOland and hobby sets
(2021-06-01, 21:44)Jeremie Guillaume Wrote: It's a nice surprise.  And stickers already exist !! (on my side I began making this one only very recently, so I hadn't checked yet for their existence in the library).
I think you should OMRize it for inclusion in the OMR Wink
One possible enhancement would be to make separate LDR's for the four corner baseplates, which are intended to rotate and allow opening one entire side or the other of the castle. That would make using that feature of the original model easier IMO.

To be honest I'd just assumed the castle was already in the OMR! But at some point I might get around to OMRizing it; at that point, I would typically put the rotating sections into LDCad groups rather than submodels (since I use submodels to reflect the build process and match the instructions).
Reply
RE: 1970's - LEGOland and hobby sets
(2021-05-28, 16:36)N. W. Perry Wrote: I have the yellow castle:


It's an older file, done in Bricksmith using LSynth, and not OMR-compliant, but perfectly usable.


.mpd   6075 - Classic Castle.mpd (Size: 146.08 KB / Downloads: 1)

I OMRized the file. No other modifications were done.

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
> By the way, has someone begun work on sets 361, 375, 585, 6371, 6375-2 ? I have them (in various non-finished-yet state, especially for stickers) on my hard disk Smile

For set 6375-2, I'm now working for stickers (sheet No. 192375) but I haven't built the model itself.
Please go ahead.
Reply
RE: 1970's - LEGOland and hobby sets
(2021-05-31, 13:10)Takeshi Takahashi Wrote: For set 6375-2, I'm now working for stickers (sheet No. 192375) but I haven't built the model itself.
Please go ahead.

Great news ! I hadn't begun work on these stickers yet (in fact the only stickers I have begun are those of set 6371).
I'm going to focus on the 6375 Exxon Station for the days to come and upload it (without stickers, at first) as soon as it's ok.
Reply
RE: 1970's - LEGOland and hobby sets
(2021-06-01, 21:55)Jeremie Guillaume Wrote: Great news ! I hadn't begun work on these stickers yet (in fact the only stickers I have begun are those of set 6371).
I'm going to focus on the 6375 Exxon Station for the days to come and upload it (without stickers, at first) as soon as it's ok.

Stickers (12pieces) completed and now on PT!!
Reply
RE: 1970's - LEGOland and hobby sets
(2021-06-06, 14:05)Takeshi Takahashi Wrote: Stickers (12pieces) completed and now on PT!!

Nice work on stickers, they're great!
Here's the station, hope you like it :

   

.mpd   6375-2 - Exxon Gas Station.mpd (Size: 197.46 KB / Downloads: 8)

Complete : yes (thanks to the stickers by Takeshi!)
OMR compliant : yes (stickers inlined)
Reply
675-1 - Snack Bar

.mpd   675-1 - Snack Bar.mpd (Size: 4.85 KB / Downloads: 4)
   
Set: 675-1 - Snack Bar
OMR Compliant: Yes
Known errors: none
Done with: MLCad 3.51
Reply
RE: 1970's - LEGOland and hobby sets
617 - Cowboys

   

.mpd   617 - Cowboys.mpd (Size: 2.65 KB / Downloads: 1)

Known errors: None
Done with: LDCad 1.6d
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
697 - Stagecoach

   

.mpd   697 - Stagecoach.mpd (Size: 5.06 KB / Downloads: 1)

OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d

Note: With this the LEGOLand Western series is complete (and luckily I own them all ... obviously MISB).

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
Hello Willy,

I really like the horses Wink

From what I see in the instructions of the set (I checked carefully), it seems to contain no 3710 part but only 3023's.
(the inventories on peeron and rebrickable disagree on this, anyway).

So I replaced your two 3710 by four 3023, IMHO this is the right version:  
.mpd   697 - Stagecoach.mpd (Size: 5.15 KB / Downloads: 1)
Reply
RE: 1970's - LEGOland and hobby sets
664 - TV Crew

   

.mpd   664 - TV Crew.mpd (Size: 9.54 KB / Downloads: 1)

OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d

Note: Sticker ready for review at the PT

Sticker  1.7 x  1.7 with White "TV2" on Blue Background
Sticker  1 x  1 with White "TV2" on Blue Background

The original sticker sheet can be found here:

https://www.bricklink.com/v2/catalog/cat...P=664stk01
LEGO ergo sum
Reply
375-2 - Castle

.mpd   375-2 - Castle.mpd (Size: 44.97 KB / Downloads: 3)
   

OMR conform
Missing items: flexible rope
Reply
RE: 375-2 - Castle
(2021-08-19, 13:50)Takeshi Takahashi Wrote: Missing items: flexible rope

I posted a version somewhere that has the string.
Reply
RE: 375-2 - Castle
(2021-08-20, 1:16)N. W. Perry Wrote: I posted a version somewhere that has the string.

Sure you did: https://forums.ldraw.org/thread-22660-po...l#pid41489

Since this came with two set numbers I suggest that you ask Johann to add them both with your credentials, but first it would be nice if you could OMRize them and subfile + inline the unofficial parts.

BTW I always like some drama in the presentation. 6075 already comes with the minifigs positioned as in the BI. 375 could use the box art?

[Image: original.jpg]

w.
LEGO ergo sum
Reply
RE: 375-2 - Castle
Oops, I've missed set 6075-2 has been submitted, sorry.
Please go ahead with Nathan's model for both 375-2 and 6075-2.

The parts (including stickers) are all official, so no inlining unofficial parts is needed I think.
(Some stickers are updated on PT, but they will be automatically reflected once they got official!)
Reply
RE: 375-2 - Castle
(2021-08-20, 12:06)Takeshi Takahashi Wrote: Oops, I've missed set 6075-2 has been submitted, sorry.
Please go ahead with Nathan's model for both 375-2 and 6075-2.

The parts (including stickers) are all official, so no inlining unofficial parts is needed I think.
(Some stickers are updated on PT, but they will be automatically reflected once they got official!)

The string would be the unofficial part—I guess you'd have to inline the LSynth donors? Honestly I haven't OMRized anything with LSynth before. But if anyone wanted to use the string in an otherwise-OMRized file, that would be fine!
Reply
RE: 375-2 - Castle
(2021-08-20, 15:13)N. W. Perry Wrote: The string would be the unofficial part—I guess you'd have to inline the LSynth donors? Honestly I haven't OMRized anything with LSynth before. But if anyone wanted to use the string in an otherwise-OMRized file, that would be fine!

Yes, the string created by LSynth will be unofficial part, so inlining is needed.
Reply
RE: 375-2 - Castle
(2021-08-24, 3:18)Takeshi Takahashi Wrote: Yes, the string created by LSynth will be unofficial part, so inlining is needed.

If I ever get around to OMRizing this model, I would convert the string to an LDCad-generated one. (More accurately, I'd re-build it from scratch, but I still use the donor parts from LSynth since they give more of a visual texture than a simple cylinder.) But in the meantime, it's there and available if anyone needs it!
Reply
RE: 375-2 - Castle
Added string and a bit of drama

   

.mpd   375-2 - Classic Castle.mpd (Size: 127.46 KB / Downloads: 3)
LEGO ergo sum
Reply
RE: 375-2 - Castle
(2021-09-11, 19:55)Willy Tschager Wrote: Added string and a bit of drama

Thanks very much for improving the model, Willy.
So nice and I like it!!
Reply
383-2 - Knight's Joust

.mpd   383-2 - Knight's Joust.mpd (Size: 14.55 KB / Downloads: 1)
   

OMR conform
Missing items: none
Reply
RE: 383-2 - Knight's Joust
Takeshi,
Apparently the saddle of the black horse isn't black, but red (I checked inventories on rebrickable and peeron, as well as the building instructions...).
Here is the resulting mpd:
.mpd   383-2 - Knight's Joust.mpd (Size: 14.55 KB / Downloads: 1)
Reply
677-1 - Knight's Procession

.mpd   677-1 - Knight's Procession.mpd (Size: 3.63 KB / Downloads: 2)
   

OMR conform
Missing items: none
Reply
RE: 1970's - LEGOland and hobby sets
Set 585 "Police headquarters"

   

.mpd   585 - Police Headquarters.mpd (Size: 14.72 KB / Downloads: 1)

OMR conform, no missing item.
Reply
390-2 - 1913 Cadillac
Updated: Added missing stickers and corrected misplaced parts


.mpd   390-2 - 1913 Cadillac.mpd (Size: 9.74 KB / Downloads: 1)
   

Currently not OMR compliant (Unofficial sticker not inlined)
Missing items: none

This set is the origin of Model Team and Creator Expert!!
Reply
RE: 1970's - LEGOland and hobby sets
   

.mpd   645-2 - Milk Float & Trailer.mpd (Size: 3.02 KB / Downloads: 2)

Set: 645-2 - Milk Float & Trailer
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d

w.
LEGO ergo sum
Reply
391-1 - 1926 Renault

.mpd   391-1 - 1926 Renault.mpd (Size: 10.89 KB / Downloads: 0)
   

Currently not OMR compliant (Unofficial sticker not inlined)
Missing items: none
Reply
392-1 - Formula 1
Updated: Added missing stickers and corrected misplaced parts

This set has two versions according to Bricklink and Peeron:
Early version (with ungrooved tiles 3068a, gear wheels 569/574)
Late version (with grooved tiles 3068b, rim wheels 3482/3634)


.mpd   392-1 - Formula 1 (Early).mpd (Size: 10.33 KB / Downloads: 0)

.mpd   392-1 - Formula 1 (Late).mpd (Size: 9.77 KB / Downloads: 0)
   
Reply
393-1 - Norton Motorcycle

.mpd   393-1 - Norton Motorcycle.mpd (Size: 6.86 KB / Downloads: 0)
   

Currently not OMR compliant (unofficial stickers not inlined)
Missing items: none
Reply
394-1 - Harley-Davidson 1000cc

.mpd   394-1 - Harley-Davidson 1000cc.mpd (Size: 7.4 KB / Downloads: 0)
   

Currently not OMR compliant (unofficial stickers not inlined)
Missing items: none
Reply
395-1 - 1909 Rolls-Royce
Updated: Added missing stickers and corrected misplaced parts


.mpd   395-1 - 1909 Rolls-Royce.mpd (Size: 13.72 KB / Downloads: 0)
   

Currently not OMR compliant (Unofficial sticker not inlined)
Missing items: none
Reply
398 - U.S.S. Constellation
The final and largest set for Hobby Set theme, later re-released as "Legends" in 2003 (with replacing some discontinued parts)

.mpd   398 - U.S.S. Constellation.mpd (Size: 44.25 KB / Downloads: 1)
   

OMR compliant
Missing items: flexible ropes
Reply
RE: 1970's - LEGOland and hobby sets
Set 361 - Tea Garden Café with Baker's Van

   

.mpd   361 - Tea Garden Café with Baker's Van.mpd (Size: 35.51 KB / Downloads: 1)

OMR compliant (unofficiel stickers inlined)
No missing item

Thanks Takeshi for stickers !
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 2 Guest(s)