1970's - LEGOland and hobby sets


1970's - LEGOland and hobby sets
#1
for good start OMR version of models by juraj3579 ...


Models by juraj3579, OMRized by me and published under CCAL v2 license with permission from author.
Quote:316 - Fire Fighter Ship [Legoland, 1978]

[Image: 316%20-%20Fire%20Fighter%20Ship.png]

316 - Fire Fighter Ship.mpd

Errors: missing stickers


390-2 - 1913 Cadillac [Hobby Set, 1975]

[Image: 390-2%20-%201913%20Cadillac.png]

390-2 - 1913 Cadillac.mpd

Errors: none


392 - Formula 1 [Hobby Set, 1975]

[Image: 392%20-%20Formula%201.png]

392 - Formula 1.mpd

Errors: none


395 - 1909 Rolls-Royce [Hobby Set, 1976]

[Image: 395%20-%201909%20Rolls-Royce.png]

395 - 1909 Rolls-Royce.mpd

Errors: none
Reply
RE: 1970's - legoland and hobby set
#2
Oh, no Thatcher Perkins my favourite Hobby Set?

w.
LEGO ergo sum
Reply
RE: 1970's - legoland and hobby sets
#3
396 - Thatcher Perkins

   

.mpd   396 - Thatcher Perkins.mpd (Size: 153.13 KB / Downloads: 4) (OMR compliant)
Known errors: None
Done with: LDCad 1.6b
LEGO ergo sum
Reply
RE: 1970's - legoland and hobby sets
#4
   

.mpd   358 - Rocket Base.mpd (Size: 16.11 KB / Downloads: 2)
358 - Rocket Base

Made the .mpd long time ago. It should be OMR conform regarding to MPD-Center. This is my first submission so I hope everything is correct.
358 was my first set back then.

Oliver
Reply
RE: 1970's - legoland and hobby sets
#5
(2019-03-15, 16:23)Oliver Dammann Wrote: 358 - Rocket Base

MY FIRST SET! Got it for my fifth birthday. Still remember the room where I build it. Remember also that I needed mom's help to find one of the red Brick Round 1x1.

w.
LEGO ergo sum
Reply
RE: 1970's - legoland and hobby sets
#10
(2019-03-15, 16:23)Oliver Dammann Wrote: 358 - Rocket Base

Made the .mpd long time ago. It should be OMR conform regarding to MPD-Center. This is my first submission so I hope everything is correct.
358 was my first set back then.

Oliver
Probably my first "space" set. Good job.
May I suggest some corrections. Blush
The turntable is not with a square base. The red/white antenna is too long. The 2 last blue 1x4 brick at the top of the stand overlap.
Vehicule not displayed on the main vue. On the vehicule, tyres are normaly dual. Use "rubber black" color instead of "black" for better rendering.
If you don't understand my english, that's normal, me too !
Reply
RE: 1970's - legoland and hobby sets
#6
   

.mpd   365 - Wild West Scene.mpd (Size: 661.18 KB / Downloads: 4)

Set: 365 - Wild West Scene
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6b
Notes: Missing in the LEGO House History Collection - what a shame
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#7
367 - Moon Landing

   


.mpd   367 - Moon Landing.mpd (Size: 37.64 KB / Downloads: 3)


Known errors: None
Done with: LDCad 1.6c
Notes: This comes 55 days too late - sorry for that!
LEGO ergo sum
Reply
RE: 70's - LEGOland and hobby sets - 601-2 - Tow Truck
#8
Photo 
Set: 601-2 - Tow Truck
Probably one of my first set. First contribution to OMR.

Known errors: None
OMR Compliant: Yes


Attached Files Thumbnail(s)
   

.mpd   601-2 - Tow Truck.mpd (Size: 1.41 KB / Downloads: 3)
Reply
RE: 1970's - LEGOland and hobby sets - 689 - Truck and Shovel
#9
Photo 
Set : 689 - Truck and Shovel

   

.mpd   689 - Truck and Shovel.mpd (Size: 3.63 KB / Downloads: 3)

Known errors : None
OMR compliant : Yes
Reply
RE: 1970's - LEGOland and hobby sets - 346-2 - House with Car
#11
Photo 
Set 346-2 - House with Car

   

.mpd   346-2 - House with Car.mpd (Size: 8.17 KB / Downloads: 4)

OMR Compliant: Yes
Known errors: One pine tree missing
Reply
RE: 1970's - LEGOland and hobby sets
#12
(2019-11-22, 21:03)Marc Giraudet Wrote: Set 346-2 - House with Car
Sets from my childhood.... (well, late childhood actually). I really should have a try to make the flat pine tree!
Reply
RE: 1970's - LEGOland and hobby sets
#13
(2019-11-23, 8:49)Philippe Hurbain Wrote: Sets from my childhood.... (well, late childhood actually). I really should have a try to make the flat pine tree!
An other raison to make the flat pine tree !
As you can see on the picture, white dots are visible on baseplate.  It's why i propose a new version for 10p04.

[attachment=4257]

[attachment=4258]
MPD file not OMR compliant

May bee you can explain how make file OMR compliant when non official parts are included.
If you don't understand my english, that's normal, me too !
Reply
RE: 1970's - LEGOland and hobby sets
#16
(2019-11-23, 15:33)Marc Giraudet Wrote: May bee you can explain how make file OMR compliant when non official parts are included.
I use Cleanup.. option in LDCad.
Just OMRized this file, will be soon in the OMR.


Ich verwende die Option Cleanup .. in LDCad.
Gerade OMRized diese Datei, wird bald in der OMR sein.
If nothing goes right, go left.
Reply
RE: 1970's - LEGOland and hobby sets - 4886 - Building Bonanza
#15
4886 - Building Bonanza - Advanced Build.
Quick and Experienced are already in OMR but not this one ?

   


.mpd   4886 - Building Bonanza - Advanced Build.mpd (Size: 29.57 KB / Downloads: 4)

Big 346-2  Wink

OMR compliant : Yes
If you don't understand my english, that's normal, me too !
Reply
RE: 1970's - LEGOland and hobby sets - 349 - Swiss Chalet
#14
349 - Swiss Chalet

   

.mpd   349 - Swiss Chalet.mpd (Size: 4.3 KB / Downloads: 4)

Known errors : Granulated pine tree missing
OMR compliant : Yes
If you don't understand my english, that's normal, me too !
Reply
RE: 1970's - LEGOland and hobby sets
#17
   

.mpd   364 - Harbour Scene.mpd (Size: 259.31 KB / Downloads: 4)

Set: 364 - Harbour Scene
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6c, MLCad 3.5, LSynth 3.1

This set required a few parts fo be authored:


.png   u572p02.png (Size: 13.82 KB / Downloads: 91) Baseplate 60 x 68 Cardboard with Harbour Scene Pattern

.png   004488a.png (Size: 9.47 KB / Downloads: 89) Sticker  1 x  4.5 with Black "TRANSPORT" Sign on Yellow Background

.png   004488b.png (Size: 8.38 KB / Downloads: 87) Sticker  1.1 x  5.1 with Black "COMPANY" Sign on Red Background

.png   004488c.png (Size: 7.2 KB / Downloads: 87) Sticker  1 x  6 with White "POLICE" Sign on Blue Background

.png   004488d.png (Size: 8.74 KB / Downloads: 88) Sticker  1.2 x  6.6 with Black "M/S UNION" Sign on Red Background

.png   004488e.png (Size: 11.67 KB / Downloads: 90) Sticker  2.3 x  2.3 Round with Lifepreserver Pattern

.png   004488f.png (Size: 5.11 KB / Downloads: 87) Sticker  1.1 x  3 with  3 Black Spots on White Background

.png   004488g.png (Size: 8.23 KB / Downloads: 84) Sticker  1.5 x  1.6 with Black Anchor on Red Background
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#18
Hello, everyone.
As this is my first submission, I hope that it satisfies OMR requirements.
I've checked that it is OMR conform through MPDCenter 2.5.0.0.

I remember I enjoyed very much playing with fire station sets in my childhood (about 25-30 years ago),
with set 6385, 6389 and 6571.

Set: 374-1 - Fire Station
OMR Compliant: Yes
Known errors: Missing stickers
Done with: MLCad 3.51


Attached Files
.mpd   374-1 - Fire Station.mpd (Size: 19.65 KB / Downloads: 6)
Reply
RE: 1970's - LEGOland and hobby sets
#19
(2020-04-14, 15:32)Takeshi Takahashi Wrote: Set: 374-1 - Fire Station
...made a quick render Wink


Attached Files Thumbnail(s)
   
Reply
RE: 1970's - LEGOland and hobby sets
#21
(2020-04-14, 18:41)Philippe Hurbain Wrote: ...made a quick render Wink

Thank you Philo.
While the US version (set 590) and almost all of later fire station sets (6382, 6385, 6389, 6571,... through today's 60215) have red buildings, this building is yellow and looks rather fresh for me. Smile
Reply
RE: 1970's - LEGOland and hobby sets
#20
(2020-04-14, 15:32)Takeshi Takahashi Wrote: Hello, everyone.
As this is my first submission, I hope that it satisfies OMR requirements.
I've checked that it is OMR conform through MPDCenter 2.5.0.0.

I remember I enjoyed very much playing with fire station sets in my childhood (about 25-30 years ago),
with set 6385, 6389 and 6571.

Set: 374-1 - Fire Station
OMR Compliant: Yes
Known errors: Missing stickers
Done with: MLCad 3.51

Most of these stickers do exist in the library, BTW (some are unofficial and would have to be inlined). Everything except the textual ones ("1", "2" and "Fire Station" in various languages).
Reply
RE: 1970's - LEGOland and hobby sets
#22
(2020-04-14, 20:21)N. W. Perry Wrote: Most of these stickers do exist in the library, BTW (some are unofficial and would have to be inlined). Everything except the textual ones ("1", "2" and "Fire Station" in various languages).

Thank you for your advice.
As this is my first work on LDraw, made about 4 years ago (recently OMRized and submitted to this forum), I haven't noticed the sticker parts.

I found some stickers in official library
* Fire emblem (for the vehicles)
* Firefighting wear (for the minifigs)
and one in parts tracker (currently unofficial)
* Clock (for the building)

Here is the updated version with official stickers.
Since the unofficial clock sticker uses a TEXMAP image, it cannot be included in a MPD file.
When the sticker is accepted as an official parts, the model will be updated.


Attached Files
.mpd   374-1 - Fire Station.mpd (Size: 19.86 KB / Downloads: 3)
Reply
RE: 1970's - LEGOland and hobby sets
#23
Set: 377-1 - Shell Service Station

OMR Compliant: Yes


Known errors: Missing flexible parts (Strings for fuel hoses)


Done with: MLCad 3.51




For this set, all of stickers can be found in the official parts library.

   


Attached Files
.mpd   377-1 - Shell Service Station.mpd (Size: 11.05 KB / Downloads: 4)
Reply
RE: 1970's - LEGOland and hobby sets
#39
(2020-04-16, 13:57)Takeshi Takahashi Wrote: Known errors: Missing flexible parts (Strings for fuel hoses)

You could use LSynth to generate the strings. See:

https://forums.ldraw.org/thread-22660-po...l#pid36540

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#40
(2020-04-23, 19:47)Willy Tschager Wrote: You could use LSynth to generate the strings. See:

https://forums.ldraw.org/thread-22660-po...l#pid36540

w.

LDCad is far superior for this.
Reply
RE: 1970's - LEGOland and hobby sets
#24
Set: 601-1 - Shell Filling Station

OMR Compliant: Yes

Known errors: Missing a part (x454pb01), Missing a flexible part(Strings for fuel hoses)

Done with: MLCad 3.51



Part x454pb01 (Road Sign Cantilever Curved with Shell Logo Print) is not available and I have used the closest part 764 as the alternative.
   


Attached Files
.mpd   601-1 - Shell Filling Station.mpd (Size: 1.87 KB / Downloads: 4)
Reply
RE: 1970's - LEGOland and hobby sets
#25
(2020-04-19, 14:34)Takeshi Takahashi Wrote: Part x454pb01 (Road Sign Cantilever Curved with Shell Logo Print) is not available and I have used the closest part 764 as the alternative.
Looks like you have just found your next part project Big Grin

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#26
(2020-04-19, 19:37)Willy Tschager Wrote: Looks like you have just found your next part project Big Grin

Unfortunately, the part will need to be (almost) newly authored as the pole is slanted, not upright (as part 764).

https://www.bricklink.com/v2/catalog/cat...ted%5D#T=C

The part here seems to be bent due to aging degradation (?)
https://rebrickable.com/parts/x454pb01/r...ogo-print/
but the related part (only in difference of pattern) looks good.
https://rebrickable.com/parts/107pr0002/...ice-print/
Reply
RE: 1970's - LEGOland and hobby sets
#27
(2020-04-20, 4:15)Takeshi Takahashi Wrote: Unfortunately, the part will need to be (almost) newly authored as the pole is slanted, not upright (as part 764).
Parts look similar enough so that a slanting transformation applied to the pole could do the trick... (see https://jc-tchang.philohome.com/manuel/prim_def.htm - in French, use translate Wink )
Reply
RE: 1970's - LEGOland and hobby sets
#28
(2020-04-20, 7:58)Philippe Hurbain Wrote: Parts look similar enough so that a slanting transformation applied to the pole could do the trick... (see https://jc-tchang.philohome.com/manuel/prim_def.htm - in French, use translate Wink )

Thank you very much. I'll try it, but I have no real part of this and cannot measure the exact dimensions.
Is this allowed for LDraw parts library standard?
Reply
RE: 1970's - LEGOland and hobby sets
#29
(2020-04-20, 13:26)Takeshi Takahashi Wrote: Thank you very much. I'll try it, but I have no real part of this and cannot measure the exact dimensions.
Is this allowed for LDraw parts library standard?
For such a part that doesn't interact with others it is not a major problem to eyeball dimensions from photos!
Reply
RE: 1970's - LEGOland and hobby sets
#30
(2020-04-20, 13:26)Takeshi Takahashi Wrote: Thank you very much. I'll try it, but I have no real part of this and cannot measure the exact dimensions.
Is this allowed for LDraw parts library standard?

The best thing in this case is asking for photos, here an elsewhere, with standard bricks attached. See:

https://forums.ldraw.org/thread-23978.html

[Image: 6bAimZS.jpg]

w.
LEGO ergo sum
Reply
RE: 1970's - LEGOland and hobby sets
#31
(2020-04-20, 13:26)Takeshi Takahashi Wrote: Thank you very much. I'll try it, but I have no real part of this and cannot measure the exact dimensions.
Is this allowed for LDraw parts library standard?

The picture on Bricklink, see: https://www.bricklink.com/catalogItemIn.asp?P=x454pb01&colorID=1&in=A
is excellent for getting the proportions relatively right. Since this part only came in 2 sets, and is extremely rare, I doubt there would be much objections against this. But try to submit it and see what the reviews say.
Reply
RE: 1970's - LEGOland and hobby sets
#32
Thank you everyone.
I'll take it easy as the part connects others only on the bottom and is very rare.

The photo of the part with different pattern on here;
https://www.bricklink.com/v2/catalog/cat...5D#T=C&C=1
looks very helpful to build 3D model.
The pole is a little more than 8 studs (160 LDU) or 7 bricks (168 LDU) high, and the slant amount is almost exact to 1 stud (20 LDU), aligning the edges of sign board and base in line.
And it has third support beam near the lower corner on the board.

I'd like to try it!!
Reply
RE: 1970's - LEGOland and hobby sets
#33
Set: 604-1 - Shell Service Car
OMR Compliant: Yes
Known errors: None
Done with: MLCad 3.51
   


Attached Files
.mpd   604-1 - Shell Service Car.mpd (Size: 2.37 KB / Downloads: 4)
Reply
RE: 1970's - LEGOland and hobby sets
#34
Set: 606-1 - Ambulance
OMR Compliant: Yes
Known errors: Missing sticker (minifig torso)
Done with: MLCad 3.51
   


Attached Files
.mpd   606-1 - Ambulance.mpd (Size: 2.53 KB / Downloads: 3)
Reply
RE: 1970's - LEGOland and hobby sets
#35
Set: 620-1 - Fire Truck
OMR Compliant: Yes
Known errors: None
Done with: MLCad 3.51
   


Attached Files
.mpd   620-1 - Fire Truck.mpd (Size: 2.95 KB / Downloads: 4)
Reply
RE: 1970's - LEGOland and hobby sets
#36
Set: 621-1 - Police Car
OMR Compliant: Yes
Known errors: Missing sticker (Front grille and headlights), substituted parts (Using printed parts for vehicle doors instead of stickered ones)
Done with: MLCad 3.51
   


Attached Files
.mpd   621-1 - Police Car.mpd (Size: 2.93 KB / Downloads: 4)
Reply
RE: 1970's - LEGOland and hobby sets
#37
Set: 622-1 - Tipper Truck
OMR Compliant: Yes
Known errors: Missing stickers (Danger stripes on the vehicle body)
Done with: MLCad 3.51
   


Attached Files
.mpd   622-1 - Tipper Truck.mpd (Size: 2.09 KB / Downloads: 3)
Reply
RE: 1970's - LEGOland and hobby sets
#38
Set: 623-1 - Red Cross Car
OMR Compliant: Yes
Known errors: Missing stickers (Front grille and headlights, Minifig torso)
Done with: MLCad 3.51
   


Attached Files
.mpd   623-1 - Red Cross Car.mpd (Size: 3.09 KB / Downloads: 3)
Reply
RE: 1970's - LEGOland and hobby sets
#41
   

.mpd   369 - Goast Guard Station.mpd (Size: 28.89 KB / Downloads: 0)

Set: 369 - Coast Guard Station
OMR Compliant: Yes
Known errors: None
Done with: LDCad 1.6d
LEGO ergo sum
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)