Technic 2016
#1
Technic 2016 models
Reply
#2
[Image: 42044.png]
Download MPD (OMR compliant)
Known errors: Missing stickers
Done with LDCad 1.5b1.
Reply
#5
Wrong file uploaded to BS folder.

w.
LEGO ergo sum
Reply
#10
Oops, missed your post. Will correct ASAP.
Reply
#11
File and link corrected.
Reply
#3
[Image: 42046.png]
Download MPD (OMR compliant)
Known errors: Missing stickers
Done with LDCad 1.5b1.
Reply
#6
Added to AIOI. Thank for sharing.

w.
LEGO ergo sum
Reply
#4
[Image: 42047.png]
Download MPD (OMR compliant)
Known errors: Missing stickers
Done with LDCad 1.5b1.
Reply
#7
Added to AIOI. Thank for sharing.

w.
LEGO ergo sum
Reply
#8
[Image: 42045.png]
Download MPD (OMR compliant)
Known errors: Missing stickers
Done with LDCad 1.5b1.
Reply
#9
Added to AIOI. Thanks for sharing.

w.
LEGO ergo sum
Reply
#12
[Image: 42048.png]
Download MPD (OMR compliant)
Known errors: Missing stickers
Done with LDCad 1.5b1.
Reply
#13
There seems to be something wrong with the seat - the white beam and tan axles under the seat are clashing with the grey beams. Looks like it might just be the tilt angle of the seat.
Reply
#14
Indeed, the seat was too tilted... Corrected!
Reply
#15
[Image: 42050.png]
Download MPD (OMR compliant)
Known errors: Missing stickers
Done with LDCad 1.5
Reply
#16
[Image: 42052.png]
Download MPD (OMR compliant)
Known errors: Missing stickers
Done with LDCad 1.5
Reply
#18
Philippe: how do you model these so fast?
Jaco van der Molen
lpub.binarybricks.nl
Reply
#19
The key to productivity is custom set parts bin, generated with Trevor's version of Brickutils. Much faster than browsing through a gazillion of parts, wondering for exact color and so on. I use several bins panes, all pointing to the set inventory bins but with different filter keys ("beam", "pin", "axle" etc...). The magical part snapping of LDCad does the rest...
Reply
#20
Philippe Hurbain Wrote:The key to productivity is custom set parts bin, generated with Trevor's version of Brickutils. Much faster than browsing through a gazillion of parts, wondering for exact color and so on. I use several bins panes, all pointing to the set inventory bins but with different filter keys ("beam", "pin", "axle" etc...). The magical part snapping of LDCad does the rest...

Interesting. I am still learning LDCad, but this sounds good!
Must try that out some day...
Jaco van der Molen
lpub.binarybricks.nl
Reply
#17
[Image: 42049.png]
Download MPD (OMR compliant)
Known errors: Missing stickers
Done with LDCad 1.5
Reply
#21
[Image: 42056.jpg]
Download MPD (OMR compliant)
Known errors: Missing stickers. Patterned parts replaced by plain parts (except for wheel arches)
Done with LDCad 1.6 alpha x
(edit) MPD updated: Corrected unrealistic gear shift paddle position (thanks Blakbird!), and fixed two wrong flex axles on rear.
Reply
#25
Updated again to correct ajar engine cover (thanks again to Blakbird for noticing!)
Reply
#27
Very nice.

I try to import this into Blender but the LDR-importer doesn't support MPD. I tried a method to export this again with MLCad but it will merge the new parts into one model with a black material.

Question: is it possible to convert a MPD into a LDR what the Blender script can import without errors?
LEGO IS MORE
Reply
#28
OK, I found MPDCenter and it exported a straight LDR file I am importing now.
LEGO IS MORE
Reply
#29
[Image: 29329177870_192a3b9aab_o.jpg]

[Image: 29584911506_c38206313e_o.jpg]
LEGO IS MORE
Reply
#30
Nothing to say but Wow!!!
Reply
#31
(2016-09-12, 6:51)Philippe Hurbain Wrote: Nothing to say but Wow!!!

Thanks :-)

I still had issues with the data because the LDR-importer will not support MPD. The LDR conversations worked but the import will merge the new added Porsche parts. The modeled decorations had wrong colors (red instead of two types of grey). And the fact that all decorations in LDRAW are modeled will cause shading issues with triangles.

But overall it's a great result.
LEGO IS MORE
Reply
#38
awesome!
Reply
#35
(2016-07-27, 13:44)Philippe Hurbain Wrote: [Image: 42056.jpg]
Download MPD (OMR compliant)
Known errors: Missing stickers. Patterned parts replaced by plain parts (except for wheel arches)
Done with LDCad 1.6 alpha x
(edit) MPD updated: Corrected unrealistic gear shift paddle position (thanks Blakbird!), and fixed two wrong flex axles on rear.

Hi there... 

first let me say... this is a great model!!! And thanx for sharing it because this makes my goal to create a finite element simulation in order to simulate this kind of event a lot easier. (an example of how such a simulation could look like with a way smaller model can be seen here) We are not sure jet, whether a simulation of the whole 42056 set will work since it is a really complex model but at least we will try. 

While working with your "42056 - Porsche 911 GT3 RS" we came across a small error in your model. The brick '64782' in the front section of bodyframe.ldr seems to be positioned upside down. 

   

This can be seen in step 311 in the manual on page 231.

Actually the model still works with this brick upside down, so it doesn't really matter. However I thought I should mention it.

regards
 Marko
Reply
#36
(2019-01-03, 14:18)Ford Perfect Wrote:
(2016-07-27, 13:44)Philippe Hurbain Wrote: Download MPD (OMR compliant)
Known errors: Missing stickers. Patterned parts replaced by plain parts (except for wheel arches)
Done with LDCad 1.6 alpha x
(edit) MPD updated: Corrected unrealistic gear shift paddle position (thanks Blakbird!), and fixed two wrong flex axles on rear.

Hi there... 

first let me say... this is a great model!!! And thanx for sharing it because this makes my goal to create a finite element simulation in order to simulate this kind of event a lot easier. (an example of how such a simulation could look like with a way smaller model can be seen here) We are not sure jet, whether a simulation of the whole 42056 set will work since it is a really complex model but at least we will try. 

While working with your "42056 - Porsche 911 GT3 RS" we came across a small error in your model. The brick '64782' in the front section of bodyframe.ldr seems to be positioned upside down. 



This can be seen in step 311 in the manual on page 231.

Actually the model still works with this brick upside down, so it doesn't really matter. However I thought I should mention it.

regards
 Marko

Hi Marko

Thanks for the error report.
I Have corrected the file in the OMR.
You can download the new file here.

Regards Johann
If nothing goes right, go left.
Reply
#37
Thanks for reporting Marko! Johann was faster, but I also corrected my file on Brickshelf.
Looks like a very interesting project, with convincing results on the small car model!
...and you can add the disclaimer: no LEGO pieces were hurt during experiments Big Grin
Reply
#39
(2019-01-03, 15:11)Philippe Hurbain Wrote: Thanks for reporting Marko! Johann was faster, but I also corrected my file on Brickshelf.
Looks like a very interesting project, with convincing results on the small car model!
...and you can add the disclaimer: no LEGO pieces were hurt during experiments Big Grin

actually I already broke one of the smaller pins (2780) during physical testing  Cry
Reply
#40
(2019-01-03, 15:11)Philippe Hurbain Wrote: Thanks for reporting Marko! Johann was faster, but I also corrected my file on Brickshelf.
Looks like a very interesting project, with convincing results on the small car model!
...and you can add the disclaimer: no LEGO pieces were hurt during experiments Big Grin

Hi Philippe...

now that we have almost the whole model meshed and ready for simulation, I found another small error... Smile
On the left side where the seat is connected to the bodyframe there is a collison:

   

This is because a few parts should probably moved a bit to the front.

Here the state before correcting it:

   

and here after:

   

as far as I could see this is only on the left side of the car below the driver seat.
I would send you my corrected version, however because of how I use it in the simulation it has been hugely changed, so it would break the current structure in your file.

regards
 Marko
Reply
#41
(2019-01-21, 14:34)Ford Perfect Wrote:
(2019-01-03, 15:11)Philippe Hurbain Wrote: Thanks for reporting Marko! Johann was faster, but I also corrected my file on Brickshelf.
Looks like a very interesting project, with convincing results on the small car model!
...and you can add the disclaimer: no LEGO pieces were hurt during experiments Big Grin

Hi Philippe...

now that we have almost the whole model meshed and ready for simulation, I found another small error... Smile
Thanks again for reporting! MPD on Brickshelf now corrected Wink
Reply
#42
(2019-01-24, 12:30)Philippe Hurbain Wrote: Thanks again for reporting! MPD on Brickshelf now corrected Wink
MPD file on Brickshelf updated again to correct a bunch of new errors spotted by Marko!
Reply
#22
[Image: 42055.png]
Download MPD (OMR compliant)
Known errors: Missing stickers.
Reply
#23
Nice work! Must've cost a lot of time.

I'll add it to the omr site when it's up again  Wink
Reply
#24
(2016-08-29, 20:25)Merlijn Wissink Wrote: Nice work! Must've cost a lot of time.
Well, not sooo long. Lots of parts, yes, but structure is relatively simple (few time consuming weird angles / flex parts)
Reply
#26
[Image: 42054.jpg]
Download MPD (OMR compliant)
Known errors: Missing stickers.
Done with LDCad 1.6 alpha 4
Edit: updated to add missing flex axle!
Reply
#33
(2016-08-31, 9:44)Philippe Hurbain Wrote: [Image: 42054.jpg]
Download MPD (OMR compliant)
Known errors: Missing stickers.
Done with LDCad 1.6 alpha 4
Edit: updated to add missing flex axle!

Hi Philippe
Just import the mpd file in my new MOC. There is a small mistake with the taillights. The turn signals should be outward.

Regards Johann
If nothing goes right, go left.
Reply
#34
(2018-08-17, 17:21)Johann Eisner Wrote: Just import the mpd file in my new MOC. There is a small mistake with the taillights. The turn signals should be outward.
Hi Johann,
Now corrected... beeing "directionally challenged", I am prone to this kind of bugs. Wink
Thanks for reporting!
Reply
#32
[Image: 42053.jpg]
Download MPD (OMR compliant)
Known errors: Missing stickers.
Reply



Forum Jump:


Users browsing this thread: 1 Guest(s)