I search for part 6797.dat


I search for part 6797.dat
#1
Hello

I hope that anyone of you has imitation the part 6797 for MLCAD.
Need it for the McLaren P1 as exhaust.

Partname: Technic Engine Air Scoop 4 x 4 x 1 1/3

Can you help me there?
Reply
Re: I search for part 6797.dat
#2
The shape is fairly simple and easy to create, but do you have other photos from different angles? Measurements?
Reply
Re: I search for part 6797.dat
#3
Yes but it is small
Reply
Re: I search for part 6797.dat
#4
I have this part but I need to look for it (great availability: once in Technic, three times in Belville :-)

I upload larger images and dimensions.

EDIT: OCt 14th: still looking... not in the technic bin and in the "single parts" bin...
Reply
Re: I search for part 6797.dat
#5
I found it! Was in "Old Gray Stuff" bin...

This part is son un-rectangular...

- The base is 4 x 4 studs extending by 1mm front and back.
- The base tapes from slightly over 4 studs (4stud + 4 LDU) at the Scoop to under 4 studs at the back (1 mm less)
- side walls are 1,2 mm, top is 1,8mm, bottom is 1,6 mm
- Around the scoop is a lip 1,4 mm wide, .2 mm high
- The part height is 13,1 mm at the back and 14 mm at the scoop (including the lip)
- Side walls are parallel.
- Radius from side to top looks to be 5mm
- Radius from the side wall to the back wall looks to be 2mm which also applies for the curve from back wall to the top.
Reply
Re: I search for part 6797.dat
#6
Do you want to do the model? I can have a shot, but more good photos would really help.
Reply
Re: I search for part 6797.dat
#7
I ordered one.It is still on the way. If it is there I can send you a 2D CAD as an image. I have no idea of it to make it even. so far I only share adapted in length, etc.
Reply
Re: I search for part 6797.dat
#8
Here's a starting point...with the raw dimensions.
The rounded stuff is a bit of a challenge, i.e. how to skew a cylinder primitive to fit...


Attached Files
.dat   6797.dat (Size: 1.17 KB / Downloads: 1)
Reply
Re: I search for part 6797.dat
#9
Interesting challenge. Here's my beginning. Do you want me to continue?


Attached Files
.dat   6797_a.dat (Size: 3.26 KB / Downloads: 1)
Reply
Re: I search for part 6797.dat
#10
Here are the pictures:

   
   
   
   
   
one more to come
Reply
Re: I search for part 6797.dat
#11
Last one:
   
Reply
Re: I search for part 6797.dat
#12
Yes, please.
Reply
Re: I search for part 6797.dat
#13
I need your opinion, according to the measurements I took, I cannot find an existing tori-primitive to fit, however one fits pretty close as you see in the attached file. Would that be a compromise or would a new prim be better?

Thanks


Attached Files
.dat   6797-2.dat (Size: 3.87 KB / Downloads: 1)
Reply
Re: I search for part 6797.dat
#14
Have you tried to use (new) values for the torus?

/Max
Reply
Re: I search for part 6797.dat
#15
Let's try to move the Toris from 0.5 to 1 in height and right / left.
Reply
Re: I search for part 6797.dat
#16
I'm almost dune. Am I reasonably right?


Attached Files
.dat   6797_a2.dat (Size: 9.77 KB / Downloads: 1)
Reply
Re: I search for part 6797.dat
#17
Done.

How do we name it? Scala Wastebin or Technic Engine Air Scoop?


Attached Files
.dat   6797.dat (Size: 10.93 KB / Downloads: 2)
Reply
Re: I search for part 6797.dat
#18
I tried to find one according to my measurements and how I understood their description.

I need and outer radius of 12.5 LDU, the torusbody itself has a radius of 5 LDU which gives me an inner radius of 7.5.

To choose the proper one I divide the inner radius by the tori (minor) radius, which is (12.5 - 5) / 5 = 7.5 / 5 = 0.66666

... and now I see that I did a mistake in my calculation before. the t04o6667.dat fits perfectly...

Good lesson, also Magnus has already completed it!


Attached Files
.dat   6797-GL3.dat (Size: 4.1 KB / Downloads: 1)
Reply
Re: I search for part 6797.dat
#19
Have you tried the programme ToriCalc? You can find it on Philo's homepage.

/Max
Reply
Re: I search for part 6797.dat
#20
Looks good. I tend to prefer Technic Engine Air Scoop as it's the name on BL and Peeron for years... OTOH LEGO names it "REFUSE PAIL FOR LID"
Reply
Re: I search for part 6797.dat
#21
Great job. Thanks for all. Il be happy.

And it works. Loock at the Photo
Reply
Re: I search for part 6797.dat
#22
I can see a corrugated tube that's not well aligned with pin Wink Looks nice otherwise!
Reply
Re: I search for part 6797.dat
#23
I agree with Philo. although only once used in Technic, thrice in Scala :-)
Reply
Re: I search for part 6797.dat
#24
I know. I still have a few kleinne parts that need to be past. I'l be on beginning with stepping and grouping the Parts.
Reply
Re: I search for part 6797.dat
#25
It's now uploaded to the PT with "Technic Engine Air Scoop 4 x 4 x 1.333" as description.

[Image: 6797.png]
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)