patterned 90498 Black Tile

[Oh-Seong KWON]

Hi,

I hope that these may be the last parts to complete 76042 Helicarrier.

90498pb02 Tile 8 x 16 with Bottom Tubes with Runway and SHIELD Logo Pattern





90498pb03 Tile 8 x 16 with Bottom Tubes with Runway Pattern




If someone has the sticker for 76042 Helicarrier, make it ldr part and upload, please.

Thanks you very much

Oscar

[Gerald Lasser]

I have them done soon Done!

Tile 8 x 16 with Runway Pattern
Tile 8 x 16 with Runway and SHIELD Logo Pattern

[Gerald Lasser]

Do you or anybody has a good hi-res scan of the stickersheet? something like 600 dpi at least would be nice, 1200 dpi is perfect. There are some on Flickr, which are better than nothing...

Thansk

[Christian Neumann]

Maybe this helps:

6115204a
6115204b
6115204c
6115204d
6115204e+6115204f
6115204g

They are scanned at 600dpi, if you really need higher resolution the files will be very very big...

[Gerald Lasser]

Thanks for those! Surprising to see how the "big 64" sticker looks... I took it in the meantime from the review at Brickset but those colors are completely off...

[Gerald Lasser]

What is the actual color with the SHIELD Eagle? Light BLue?

[Christian Neumann]

What is the actual color with the SHIELD Eagle? Light BLue?

Maybe it is distorted by scanning, but the real color is Medium Blue.

Edit: the inverted one uses the same colors of cause.

[Gerald Lasser]

All stickers (except the description) for the helicarrier are on the PT, look for the number of the sticker sheet "6115204"

[Oh-Seong KWON]

Thank you so much

But 6115204a.dat is not shown in 615204 list of part tracker at the moment

http://www.ldraw.org/cgi-bin/ptscan.cgi?q=6115204

Please, check it again.

Oscar

[Max Martin Richter]

Isn't this one of the "d" or "e" sticker?
Anyway I wonder why "a" is missing...

/Max

[Gerald Lasser]

I did the naming in a different way than the pictures which are attached to Christian's post.

a: the UCS plaque (G in Christian's post) I did not do it (yet) as it is a hell of work
b: is the large sticker with the 64 Pattern and the tons of rivets.. (C in Christian's post)
c: is the smaller "64" Sticker (D in Christian's post)
d/e: the two SHIELD logos (A/B in Christian's post)
f/g: The runway portions.

I am not sure about the font of the plaque. It looks to be just a simple Calibri, with a modified "1" everything else looks fine.

[Christian Neumann]

The pictures in my post are named in no special order. Just as i cut them from the scanned image.
BTW, there is no real guideline for this. Perhaps it makes sense to use the same sequence as the stickers are used in the instructions, but really... seems of minor importance :-)