During the quest for all the Train-Stickers to be done, i came across the Set 4512.
It has got the same pattern one as printed part and as a sticker.
![[Image: 4512_trainlogo.jpg]](http://www.brickshelf.com/gallery/lg008823/TrainPosterV2/4512_trainlogo.jpg)
The problem is with the location of the printed pattern, it is located on the door:
![[Image: 4181pb01.jpg]](http://www.brickshelf.com/gallery/lg008823/TrainPosterV2/4181pb01.jpg)
... and there partly on the "fixed" part of the basic shape (4181), Yellow Area:
![[Image: 4512_4181s011.png]](http://www.brickshelf.com/gallery/lg008823/TrainPosterV2/4512_4181s011.png)
Now several options:
- Inline the basic shape (sans the yellow area) into the new patterned part: I do not want to add this part with a complete inline of the basic traindoor as it would not serve the purpose right if there is an improvement of the basic shape.
- Realize the top line with the four rivets as a "sticker": Not really true to the part but probably the easiest solution.
- Change the basic shape, i.e. remove the yellow part from the basic definition and add it to all other doors... That would also come close to an overkill, won't it?
What would be your suggested approach?
It has got the same pattern one as printed part and as a sticker.
The problem is with the location of the printed pattern, it is located on the door:
... and there partly on the "fixed" part of the basic shape (4181), Yellow Area:
Now several options:
- Inline the basic shape (sans the yellow area) into the new patterned part: I do not want to add this part with a complete inline of the basic traindoor as it would not serve the purpose right if there is an improvement of the basic shape.
- Realize the top line with the four rivets as a "sticker": Not really true to the part but probably the easiest solution.
- Change the basic shape, i.e. remove the yellow part from the basic definition and add it to all other doors... That would also come close to an overkill, won't it?
What would be your suggested approach?