LDraw.org Discussion Forums › Models and Parts › Part Requests v
Parts we are working on

Parts we are working on


Magnus Forsberg Offline
LDraw.org Moderator ******
James Jessiman Memorial PTSubmit
Posts: 1,980
Threads: 74
Joined: Dec 2011
RE: Parts we are working on
#101
2019-01-16, 17:33
(2019-01-15, 21:04)Merlijn Wissink Wrote: Shouldn't the part number for 52116 be 49309?

Yes, both number are wrong. The dome is 49308 and the cone is 49309.
https://www.bricklink.com/catalogItemInv.asp?M=tlm127

with a cherry on top. Smile
Find
Max Martin Richter Offline
Administrator *******
Administrators PTSubmit Steering Committee
Posts: 1,035
Threads: 66
Joined: Jul 2011
RE: Parts we are working on
#102
2019-01-31, 18:53 (This post was last modified: 2019-02-01, 11:59 by Max Martin Richter.)
I got a request in the Ambassador Network for 43979. I actually finished the basic geometry and hope I'll finish this part in the next days.

[Image: 6250322]
Find
Max Martin Richter Offline
Administrator *******
Administrators PTSubmit Steering Committee
Posts: 1,035
Threads: 66
Joined: Jul 2011
RE: Parts we are working on
#103
2019-02-01, 11:58
(2019-01-31, 18:53)Max Martin Richter Wrote: I got a request in the Ambassador Network for 43979. I actually finished the basic geometry and hope I'll finish this part in the next days.

Any ideas for the description of this part?
Find
Philippe Hurbain Offline
Administrator *******
Administrators App Developers James Jessiman Memorial PTSubmit Steering Committee
Posts: 5,024
Threads: 170
Joined: Jul 2011
RE: Parts we are working on
#104
2019-02-01, 12:18
(2019-02-01, 11:58)Max Martin Richter Wrote: Any ideas for the description of this part?
Wing 12 x 12 with X x Y recessed center? I see some relationship with 47407 or 43719.
Website Find
Johann Eisner Offline
LDraw.org Moderator ******
PTSubmit
Posts: 531
Threads: 51
Joined: Sep 2014
Tile 2 x 4 with '60 years' Pattern
#105
2019-08-03, 15:19 (This post was last modified: 2019-08-06, 17:42 by Johann Eisner.)
https://www.bricklink.com/v2/search.page...ckable#T=A

On PT:
https://www.ldraw.org/cgi-bin/ptdetail.c...079p0e.dat


Attached Files
.png   60th_lego2.PNG (Size: 141.48 KB / Downloads: 432)
If nothing goes right, go left.
Website Find
Philippe Hurbain Offline
Administrator *******
Administrators App Developers James Jessiman Memorial PTSubmit Steering Committee
Posts: 5,024
Threads: 170
Joined: Jul 2011
42099 parts (CV joints, Control+, geared hubs)
#106
2019-08-14, 11:36
...working on them, started CV joint.
Website Find
Gerald Lasser Offline
Administrator *******
Administrators James Jessiman Memorial PTSubmit Steering Committee
Posts: 1,513
Threads: 76
Joined: Sep 2011
RE: Parts we are working on - Tricycle Frame 50015
#107
2019-09-23, 7:32
I have started work on the tricycle frame, basic shape and connection points are fine.
   
Find
Philippe Hurbain Offline
Administrator *******
Administrators App Developers James Jessiman Memorial PTSubmit Steering Committee
Posts: 5,024
Threads: 170
Joined: Jul 2011
RE: Parts we are working on - Tricycle Frame 50015
#108
2019-09-23, 9:35
This part has been requested on Studio forum...
Website Find
Gerald Lasser Offline
Administrator *******
Administrators James Jessiman Memorial PTSubmit Steering Committee
Posts: 1,513
Threads: 76
Joined: Sep 2011
RE: Parts we are working on - Tricycle Frame 50015
#109
2019-09-23, 11:13 (This post was last modified: 2019-09-23, 11:18 by Gerald Lasser. Edit Reason: Add on info )
(2019-09-23, 9:35)Philippe Hurbain Wrote: This part has been requested on Studio forum...

Shall we answer them? (edit: I did)
I stared it because New Elementary is hosting a building competition with the frame as a seed part
Find
Gerald Lasser Offline
Administrator *******
Administrators James Jessiman Memorial PTSubmit Steering Committee
Posts: 1,513
Threads: 76
Joined: Sep 2011
RE: Parts we are working on - Tricycle Frame 50015
#110
2019-09-25, 9:33
(2019-09-23, 7:32)Gerald Lasser Wrote: I have started work on the tricycle frame, basic shape and connection points are fine.

Where shall I put the Origin?

Top Clip as there is no stud as a reference...
Find
Philippe Hurbain Offline
Administrator *******
Administrators App Developers James Jessiman Memorial PTSubmit Steering Committee
Posts: 5,024
Threads: 170
Joined: Jul 2011
RE: Parts we are working on - Tricycle Frame 50015
#111
2019-09-25, 12:21
(2019-09-25, 9:33)Gerald Lasser Wrote: Where shall I put the Origin?

Top Clip as there is no stud as a reference...
Yeah, top clip. Bottom bar would make some sense too, but top clip looks better as this part is supposed to be articulated there.
Website Find
Gerald Lasser Offline
Administrator *******
Administrators James Jessiman Memorial PTSubmit Steering Committee
Posts: 1,513
Threads: 76
Joined: Sep 2011
RE: Parts we are working on - 33213 Belville Tower
#112
2019-09-28, 9:20 (This post was last modified: 2019-09-28, 9:22 by Gerald Lasser.)
I am working on that huge piece of a panel (?)

Naming suggestions are welcome :-)

something 6 x 8 x 12 with chamfered corners and Arched Window cutout?


Attached Files Thumbnail(s)
   
Find
Gerald Lasser Offline
Administrator *******
Administrators James Jessiman Memorial PTSubmit Steering Committee
Posts: 1,513
Threads: 76
Joined: Sep 2011
RE: Parts we are working on - Mandalorian Helmets
#113
2019-10-08, 15:15
Aftersome hiatus, I took up the patterns of the Mandalorian Helmets, Part 87610

That's the status right now, I got pitcures now from most of them, except #5 and #8 I would like to have a top down as well, which I cannot find.

I subfiled the Helmet further to maximise the re-usability.


.png   87610-Subfiles.PNG (Size: 31.45 KB / Downloads: 359)
   
Find
Magnus Forsberg Offline
LDraw.org Moderator ******
James Jessiman Memorial PTSubmit
Posts: 1,980
Threads: 74
Joined: Dec 2011
RE: Parts we are working on - Mandalorian Helmets
#114
2019-10-08, 16:40
(2019-10-08, 15:15)Gerald Lasser Wrote: I subfiled the Helmet further to maximise the re-usability.

Yes, I remember sorting this to ease the pattern creation.
Find
Gerald Lasser Offline
Administrator *******
Administrators James Jessiman Memorial PTSubmit Steering Committee
Posts: 1,513
Threads: 76
Joined: Sep 2011
RE: Parts we are working on - Mandalorian Helmets
#115
2019-10-14, 19:27
Now prepping for upload...
   
Find
Willy Tschager Offline
Administrator *******
Administrators App Developers PTSubmit Steering Committee
Posts: 3,422
Threads: 485
Joined: Jul 2011
RE: Parts we are working on - Mandalorian Helmets
#116
2019-10-15, 6:29
(2019-10-14, 19:27)Gerald Lasser Wrote: Now prepping for upload...

WOW!
LEGO ergo sum
Website Find
Philippe Hurbain Offline
Administrator *******
Administrators App Developers James Jessiman Memorial PTSubmit Steering Committee
Posts: 5,024
Threads: 170
Joined: Jul 2011
Liebherr 42100 bucket
#117
2019-11-05, 9:30
Started working on 46891 bucket... this big baby is a tough one!


Attached Files Thumbnail(s)
   
Website Find
Philippe Hurbain Offline
Administrator *******
Administrators App Developers James Jessiman Memorial PTSubmit Steering Committee
Posts: 5,024
Threads: 170
Joined: Jul 2011
RE: Liebherr 42100 bucket
#118
2019-11-12, 10:08
Soon on PT! Phew... Tongue


Attached Files Thumbnail(s)
       
Website Find
Willy Tschager Offline
Administrator *******
Administrators App Developers PTSubmit Steering Committee
Posts: 3,422
Threads: 485
Joined: Jul 2011
RE: Liebherr 42100 bucket
#119
2019-11-12, 19:35
I can already see from this picture that there are tons of T-Junk, rounding errors, concave and coplanar quads, bowties, wrong BFC syntax, keyword-lenght, wrong category, wrong origin and orientation, missing blanks in the description ... I'm sure the 0 at the end is a copy'n'paste error.

w.
LEGO ergo sum
Website Find
Max Martin Richter Offline
Administrator *******
Administrators PTSubmit Steering Committee
Posts: 1,035
Threads: 66
Joined: Jul 2011
RE: Parts we are working on
#120
2019-11-15, 23:38
I try to finish the last sticker for set 8858.
But I have no idea how to deal with the edges here. As this is more like a part, I tend to go for an exception of the sticker specs. and add the edges all around.
Any opinions on this?
   

/Max
Find
Willy Tschager Offline
Administrator *******
Administrators App Developers PTSubmit Steering Committee
Posts: 3,422
Threads: 485
Joined: Jul 2011
RE: Parts we are working on
#121
2019-11-16, 10:04
(2019-11-15, 23:38)Max Martin Richter Wrote: I try to finish the last sticker for set 8858.
But I have no idea how to deal with the edges here. As this is more like a part, I tend to go for an exception of the sticker specs. and add the edges all around.
Any opinions on this?


/Max

Agree.

w.
LEGO ergo sum
Website Find
Johann Eisner Offline
LDraw.org Moderator ******
PTSubmit
Posts: 531
Threads: 51
Joined: Sep 2014
RE: Parts we are working on
#122
2019-11-16, 20:38
(2019-11-15, 23:38)Max Martin Richter Wrote: I try to finish the last sticker for set 8858.
But I have no idea how to deal with the edges here. As this is more like a part, I tend to go for an exception of the sticker specs. and add the edges all around.
Any opinions on this?


/Max

Makes sense.
If nothing goes right, go left.
Website Find
Max Martin Richter Offline
Administrator *******
Administrators PTSubmit Steering Committee
Posts: 1,035
Threads: 66
Joined: Jul 2011
RE: Parts we are working on
#123
2019-11-17, 16:17
Its uploaded to PT. :-)
Find
Orion Pobursky Online
Administrator *******
Administrators App Developers James Jessiman Memorial PTAdmin PTSubmit Standards Board Steering Committee
Posts: 4,692
Threads: 655
Joined: Jul 2011
RE: Parts we are working on - Mandalorian Helmets
#124
2019-11-27, 14:13
(2019-10-14, 19:27)Gerald Lasser Wrote: Now prepping for upload...

Looks like you have more work to do Big Grin
[Image: 75267-LEGO-Mandalorian-Battle-Pack_2.jpg]
Find
Gerald Lasser Offline
Administrator *******
Administrators James Jessiman Memorial PTSubmit Steering Committee
Posts: 1,513
Threads: 76
Joined: Sep 2011
RE: Parts we are working on - Mandalorian Helmets
#125
2019-11-27, 17:19
(2019-11-27, 14:13)Orion Pobursky Wrote: Looks like you have more work to do Big Grin
Yeah, I saw this too today and nearly shouted out "oh no!" ?
Find
Philippe Hurbain Offline
Administrator *******
Administrators App Developers James Jessiman Memorial PTSubmit Steering Committee
Posts: 5,024
Threads: 170
Joined: Jul 2011
Electric, Light & Sound Siren 2 x 6 x 1 with Trans-Dark Blue Lights and White Center
#126
2019-12-05, 16:31 (This post was last modified: 2019-12-05, 16:31 by Philippe Hurbain.)
I intend to create this part, I have enough information to create shape, but I miss design numbers for the parts used in the assembly. Is there someone with this part (and a magnifying glass!) able to help me? A few more close-up photos would be appreciated too...
https://www.bricklink.com/v2/catalog/cat...P=40931c01
Website Find
Matthew Coleman Offline
Seasoned LDrawer ***
Posts: 111
Threads: 34
Joined: Apr 2020
RE: Parts we are working on
#127
2020-10-25, 22:47
(2018-08-06, 15:40)Magnus Forsberg Wrote: I'm working on all the Powerpuff Girls

[Image: dim052.png]

Is there a way to figure out the correct partnumber of their different hair pieces?
They use the same part (31512), with different print, as face, and Brickset only have the assembly numbers of the complete heads.

How's it going so far? I was thinking about making a Powerpuff Girls project for LEGO Ideas, but I'll have to wait for the headpieces to be uploaded to Parts Tracker.

Let me know how the progress is going. Thanks!
Find
Magnus Forsberg Offline
LDraw.org Moderator ******
James Jessiman Memorial PTSubmit
Posts: 1,980
Threads: 74
Joined: Dec 2011
RE: Parts we are working on
#128
2020-10-26, 6:36
(2020-10-25, 22:47)Matthew Coleman Wrote: Let me know how the progress is going. Thanks!

Great fun.
I was asking myself yesterday: What's next? 
I'll have to dig into my archive of unfinished project. I think I have one of the heads ready, and the other two needs a face print. I'll start digging.
Find
Matthew Coleman Offline
Seasoned LDrawer ***
Posts: 111
Threads: 34
Joined: Apr 2020
RE: Parts we are working on
#129
2020-10-26, 9:38
(2020-10-26, 6:36)Magnus Forsberg Wrote: Great fun.
I was asking myself yesterday: What's next? 
I'll have to dig into my archive of unfinished project. I think I have one of the heads ready, and the other two needs a face print. I'll start digging.

Okay, that's fine. Take all the time you need. I would love to see these PPG headpieces on Stud.io someday.
Find
Magnus Forsberg Offline
LDraw.org Moderator ******
James Jessiman Memorial PTSubmit
Posts: 1,980
Threads: 74
Joined: Dec 2011
RE: Parts we are working on
#130
2020-10-26, 16:41
Found them ....

   
Find
Philippe Hurbain Offline
Administrator *******
Administrators App Developers James Jessiman Memorial PTSubmit Steering Committee
Posts: 5,024
Threads: 170
Joined: Jul 2011
RE: Parts we are working on
#131
2020-10-26, 17:16
(2020-10-26, 16:41)Magnus Forsberg Wrote: Found them ....
Nice!!!
Website Find
Magnus Forsberg Offline
LDraw.org Moderator ******
James Jessiman Memorial PTSubmit
Posts: 1,980
Threads: 74
Joined: Dec 2011
RE: Parts we are working on
#132
2020-11-18, 21:44
All of the parts are now at the Part Tracker, including a new and much better, printed head for this fig, Blossom.
https://www.ldraw.org/cgi-bin/ptscan.cgi?q=powerpuff

Now that I have a better face ready, I can continue with the other two.
It's not easy to transform a flat image to a print on a sphere.   Big Grin
Find
Matthew Coleman Offline
Seasoned LDrawer ***
Posts: 111
Threads: 34
Joined: Apr 2020
RE: Parts we are working on
#133
2020-11-22, 0:34
(2020-11-18, 21:44)Magnus Forsberg Wrote: All of the parts are now at the Part Tracker, including a new and much better, printed head for this fig, Blossom.
https://www.ldraw.org/cgi-bin/ptscan.cgi?q=powerpuff

Now that I have a better face ready, I can continue with the other two.
It's not easy to transform a flat image to a print on a sphere.   Big Grin

Wow! Thank you so much! By the way, how exactly were you able to disassemble each PPG headpiece for this?
Find
Magnus Forsberg Offline
LDraw.org Moderator ******
James Jessiman Memorial PTSubmit
Posts: 1,980
Threads: 74
Joined: Dec 2011
Powerpuff Girls
#134
2020-12-01, 20:01
(2020-11-22, 0:34)Matthew Coleman Wrote: By the way, how exactly were you able to disassemble each PPG headpiece for this?

I didn't. One of the exported files from LDD contained the inner structure of both the head and the hair part.
All I had to do was to "transplant" the inner structure into the other files.

All the girls are now done!
https://www.ldraw.org/cgi-bin/ptscan.cgi?q=powerpuff

   

Let me see how you use them.
Find
« Next Oldest | Next Newest »

Thread Closed 


Forum Jump:


Users browsing this thread: 1 Guest(s)