Parts we are working on

[Philippe Hurbain]

Working on part 22390...

[Tom Burger]

i am working on part(s)

57786
57789
57789c01

it has been a VERY long time since i have done any parts. i plan to give the insert a better detail

[Philippe Hurbain]

i am working on part(s)

57786
57789
57789c01

it has been a VERY long time since i have done any parts. i plan to give the insert a better detail

You start again HUGE (at least for the part considered ) Good luck!

[Philippe Hurbain]

Currently working on 27255...

[Philippe Hurbain]

Currently working on 27255...

...done http://www.ldraw.org/cgi-bin/ptdetail.cg.../27255.dat
Attached connectivity files for LDCad.

[Willy Tschager]

Polishing: http://www.ldraw.org/cgi-bin/ptdetail.cgi?s=92759

w.

[Evert-Jan Boer]

Working on the astronaut nanofig, have a good pattern to work with. Part of the legs already done

   

[Willy Tschager]

I'm fixing:



http://www.ldraw.org/cgi-bin/ptdetail.cg.../47846.dat

w.

[Santeri Piippo]

Starting work on 60926

[Philippe Hurbain]

Starting cleaning of LDD 23448.
Done http://www.ldraw.org/cgi-bin/ptdetail.cg.../23448.dat

[Philippe Hurbain]

Getting a look at 27259... Much faster than expscted... done http://www.ldraw.org/cgi-bin/ptdetail.cg.../27259.dat

[Philippe Hurbain]

Starting 29114/29115...

[Johann Eisner]

LegoTile 2 x 2 with 'TNT' on Wood Grain Pattern

Item No: 3068bpb0975


Done......3068bpx2.dat

[Willy Tschager]

Tile 2 x 2 with Map Street Level with Red 'X' Pattern

Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...68bp76.dat

   

[Johann Eisner]

Starting....https://www.bricklink.com/v2/catalog/catalogitem.page?P=3068bpb0974&name=Tile%202%20x%202%20with%20%27POLICE%27%20on%20Badge%20Pattern%20(10720)&category=%5BTile,%20Decorated%5D#T=C&C=1


Tile 2 x 2 with 'POLICE' on Badge Pattern

Done.... http://www.ldraw.org/cgi-bin/ptdetail.cg...68bp0e.dat

[Johann Eisner]

Starting Nex Knight Shield... https://www.bricklink.com/v2/catalog/cat...?id=142986


Done.... http://www.ldraw.org/cgi-bin/ptdetail.cg...385pe2.dat

[Santeri Piippo]

Starting 54389: Electric Constraction Eyes 4.5 x 1.6 x 1.3



I tried to replace its battery, which requires disassembling it. Now it doesn't work anymore because I had replaced the 3V battery with a 1.55V one... so now that it's in pieces, I might as well model it.

[Philippe Hurbain]

I intend to have a look at the new Unikitty part shapes:
https://brickset.com/parts/design-35470
https://brickset.com/parts/design-35463
https://brickset.com/parts/design-35459

[Gerald Lasser]

I intend to have a look at the new Unikitty part shapes:
https://brickset.com/parts/design-35470
https://brickset.com/parts/design-35463
https://brickset.com/parts/design-35459

Do you have the parts already? I am trying to get 35463 and 35459 today, I am not sure if the collectible bags are already in the store

[Philippe Hurbain]

I intend to have a look at the new Unikitty part shapes:
https://brickset.com/parts/design-35470
https://brickset.com/parts/design-35463
https://brickset.com/parts/design-35459

Do you have the parts already? I am trying to get 35463 and 35459 today, I am not sure if the collectible bags are already in the store

Yes I do, bought one yesterday. Was available in Paris store. Also had a close look at steep straight roller coaster slope!

[Gerald Lasser]

Do you have the parts already? I am trying to get 35463 and 35459 today, I am not sure if the collectible bags are already in the store

Yes I do, bought one yesterday. Was available in Paris store. Also had a close look at steep straight roller coaster slope!

OK, great! The steep slope should be pretty similar to the relevant s-slope parts, isnt't it?

[Philippe Hurbain]

Yes I do, bought one yesterday. Was available in Paris store. Also had a close look at steep straight roller coaster slope!

OK, great! The steep slope should be pretty similar to the relevant s-slope parts, isnt't it?

Yes it is. A mix of lower part of http://www.ldraw.org/cgi-bin/ptdetail.cg.../26560.dat and upper part of http://www.ldraw.org/cgi-bin/ptdetail.cg.../26559.dat ... Maybe I'll do more subparting.

[Gerald Lasser]

OK, great! The steep slope should be pretty similar to the relevant s-slope parts, isnt't it?

Yes it is. A mix of lower part of http://www.ldraw.org/cgi-bin/ptdetail.cg.../26560.dat and upper part of http://www.ldraw.org/cgi-bin/ptdetail.cg.../26559.dat ... Maybe I'll do more subparting.

I could do some pictures of the parts in the store today, they still had and "glueless" demo behind the counter :-)

[Gerald Lasser]

I am starting to work on:

Part 35473 (Petals) 
Part 38265 (brick 1 x 3 rounded, with Print)
Part 35464 (ROOF TILE 1X1, DEG. 45, W/O KNOBS)

[Willy Tschager]

Working on:

60603pb004 - Glass for Window 1 x 4 x 3 - Opening with 'ACE BRICKMAN PRIVATE DETECTIVE' Pattern


Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...210p01.dat

[Santeri Piippo]

Starting 61808, just some nine years late...

[Magnus Forsberg]

I'm working on all the Powerpuff Girls



Is there a way to figure out the correct partnumber of their different hair pieces?
They use the same part (31512), with different print, as face, and Brickset only have the assembly numbers of the complete heads.

[Willy Tschager]

I'm working on all the Powerpuff Girls

Good luck!

Is there a way to figure out the correct partnumber of their different hair pieces?
They use the same part (31512), with different print, as face, and Brickset only have the assembly numbers of the complete heads.

How about the LAN through Max our Ambassador?

w.

[Ulrich Röder]

Done 24077....

Minifig Crutch No 1

[Ulrich Röder]

working on Stickers of Model Team Sets .....

5590-1 Whirl N' Wheel Super Truck

5591-1 Mach II Red Bird Rig / Mach II Red Bird

[Magnus Forsberg]

working on Stickers of Model Team Sets .....

5590-1 Whirl N' Wheel Super Truck

5591-1 Mach II Red Bird Rig / Mach II Red Bird

Hello Ulrich.

I've had a look at all your new sticker at the Part Tracker.
Please read and follow the official Sticker specifications found here.

As far as a I can see non of your stickers or part shortcuts follow the naming nomenclature.
All files need a renumbering and corrected descriptions. Please send a mail to PT Admin and ask for help.

[Chris Dee]

working on Stickers of Model Team Sets .....

5590-1 Whirl N' Wheel Super Truck

5591-1 Mach II Red Bird Rig / Mach II Red Bird

Hello Ulrich.

I've had a look at all your new sticker at the Part Tracker.
Please read and follow the official Sticker specifications found here.

As far as a I can see non of your stickers or part shortcuts follow the naming nomenclature.
All files need a renumbering and corrected descriptions. Please send a mail to PT Admin and ask for help.

I have straightened out the naming and sent Ulrich a private message.

[Philippe Hurbain]

Working on the new version of Pneumatic 6L pump...
https://www.bricklink.com/v2/catalog/cat...=7#T=C&C=7

[Willy Tschager]

Watto:

   

For the patterned version I would need some high resolution photos from all sides + two-thirds from left and right for reference. I found some pics on the net but not greater than 1600 x 1600 which is not enough.
w.

[Ulrich Röder]

working on Stickers of Model Team Sets .....

5590-1 Whirl N' Wheel Super Truck

5591-1 Mach II Red Bird Rig / Mach II Red Bird

complete and ready....so far..

[Ulrich Röder]

...working on  <-<-<-<--- Lied! ...( ... it is ready .... for your merciless review )....42013  Belville Ice Skate

Ice Skate


also ready....24077 Minifig Crutch


Clumsy Guy

[Gerald Lasser]

Watto:



For the patterned version I would need some high resolution photos from all sides + two-thirds from left and right for reference. I found some pics on the net but not greater than 1600 x 1600 which is not enough.
w.

Teaser! I got an original packed one :-)

I will upload a few shots, but I do not have proper lighting currently.

Here's the link:
https://www.dropbox.com/sh/l0iqwlv5do7e8...YmPLa?dl=0

[Ulrich Röder]

   




....working on 6241717 Decorative Gothic Glass


http://www.newelementary.com/2018/08/leg...astle.html
[/url]









[url=http://www.newelementary.com/2018/08/lego-harry-potter-71403-hogwarts-castle.html]

[Ulrich Röder]

[url=http://www.newelementary.com/2018/08/lego-harry-potter-71403-hogwarts-castle.html][/url]

6241717 Decorative Gothic Glass...is ready....renaming by admin will follow

[Willy Tschager]

Gerald,

this is great stuff! I would appreciate a close up of the eyes and the neck where the tan meets the blue part on both sides.

w.

[Gerald Lasser]

I uploaded some more pictures to the dropbox, please check

[Willy Tschager]

This was a tough one. It took me three attempts to finally tackle it an I worked more than 3 months on it. Getting a part like this ready without LDPE is almost impossible - I'm glad we have such a tool.

   

Minifig Head Toydarian  - http://www.ldraw.org/cgi-bin/ptdetail.cg.../92759.dat
Minifig Head Toydarian with Watto Vest and Belt Pattern - http://www.ldraw.org/cgi-bin/ptdetail.cg...759p01.dat

w.

[Gerald Lasser]

This looks really astonishing! Amazing job!

n.b. I see that here the patterned areas are smooth, on the PT they aren't. May be you swapped the file?

[Willy Tschager]

Thanks for pointing. It was just that Datheader ripped all my conds.

[Willy Tschager]

Working on:

Minifig Torso White Vertical Stripes and Red Bow Tie Pattern



Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...973p7i.dat

Minifig Torso Police Female Shirt with Gold Badge, Pocket and Black Tie Pattern



Done: http://www.ldraw.org/cgi-bin/ptdetail.cg...973p7l.dat


w.

[Magnus Forsberg]

I'm working on the new mudguard to the '67 Mini Cooper.




Done: http://www.ldraw.org/cgi-bin/ptdetail.cg.../49097.dat

[Gerald Lasser]

Working on 47734 

[Gerald Lasser]

Working on 47734 

And 52116

[Philippe Hurbain]

As you may have noticed on PT I'm working on plate gears. I already completed the 14t one (http://www.ldraw.org/cgi-bin/ptdetail.cg.../35446.dat) and I'm working on the 6t. But I miss a photo of the bottom of the 10t one. Anybody got it?

[Merlijn Wissink]

Shouldn't the part number for 52116 be 49309?