Pirate Themed Parts

[Belic]

Hello!
I am not a programmer so I am sorry if I do not use this forum properly.
I was using Studio to make some LEGO pirate themed MOCs, but I noticed it misses some parts, that can be useful.

I read the forum rules, so I will try to post those parts properly.

MINI WIG, NO. 288 or Minifigure, Hair Combo, Hair with Hat, Long Hair with Ponytail and Molded Black Pirate Tricorne Hat Pattern

BIG PIRATE HAT or Minifigure, Headgear Hat, Pirate Circular with Fold in Brim and Marine Growth Pattern - this item exists in digital form at http://www.digital-bricks.de

Mini Wig No. 37 'no. 2' or Minifigure, Hair Female Mid-Length with Part over Front of Right Shoulder with Red Cloth Wrap / Bandana Pattern - this item exists in digital form at http://www.digital-bricks.de

Mini Wig No. 42 'no. 1' or Minifigure, Hair Long Tied Back with Black Ribbon Pattern - this item exists in digital form at http://www.digital-bricks.de

3626bpx81 - Yellow Minifigure, Head Moustache Pointed, Goatee and Stubble Pattern - Blocked Open Stud

973px135c01 - Green Torso Pirate Imperial Armada Ruffles, White Stripes Gold Medal Pattern / Green Arms / Yellow Hands

Thank you so much for your help!

[Chris Böhnke]

3626bpx81 and 973px135c01 (Imperial Armada Stuff) have been on my list a bit longer (like basically all missing 90s stuff ), but haven't started yet. When I have time, I will see to them.

EDIT:
If you haven't already done so, be sure to get familiar with importing LDraw .dat files to Stud.io (Stud.io is maintained and owned by Bricklink.com not LDraw.org). There is a guide for this somewhere in this forum, but I couldn't find it at the moment.

[Lisa Winter]

Mini Wig No. 37 'no. 2' or Minifigure, Hair Female Mid-Length with Part over Front of Right Shoulder with Red Cloth Wrap / Bandana Pattern - this item exists in digital form at http://www.digital-bricks.de

Hello,

I can clean this part.

Kind regards,

Lisa

[Jeff Jones]

67043pb01 is probably on BI

yup its on Bi
  Exp_ColorChange_1.dat (Size: 75.71 KB / Downloads: 2)
  Shell.dat (Size: 166.08 KB / Downloads: 2)

[Belic]

3626bpx81 and 973px135c01 (Imperial Armada Stuff) have been on my list a bit longer (like basically all missing 90s stuff ), but haven't started yet. When I have time, I will see to them.
EDIT:
If you haven't already done so, be sure to get familiar with importing LDraw .dat files to Stud.io (Stud.io is maintained and owned by Bricklink.com not LDraw.org). There is a guide for this somewhere in this forum, but I couldn't find it at the moment.

I am starting to familiarize myself with everything.

In the meantime I found two more pieces that could be made (one exists in digital form) but I am not sure if it is appropriate to swarm the thread with requests.

By the way, what does the BI acronym stands for? Thanks!

And thank you all for the help!

[Orion Pobursky]

BI is the LEGO Builder App.

[Lisa Winter]

Mini Wig No. 37 'no. 2' or Minifigure, Hair Female Mid-Length with Part over Front of Right Shoulder with Red Cloth Wrap / Bandana Pattern - this item exists in digital form at http://www.digital-bricks.de

I have cleaned 11254 which is on the PT now

https://library.ldraw.org/parts/42199
https://library.ldraw.org/parts/42198
https://library.ldraw.org/parts/42200

Kind regards,

Lisa

[Lisa Winter]

MINI WIG, NO. 288 or Minifigure, Hair Combo, Hair with Hat, Long Hair with Ponytail and Molded Black Pirate Tricorne Hat Pattern

Hello,

I can clean this part.

Kind regards,

Lisa

[Belic]

Thank you so much for the help!
If it is not to much to ask, I would post two more similar parts, if possible to create:

Jack Sparrow W. Scarf No. 1 or Minifigure, Hair Dreadlocks with Beads and Dark Red Bandana Pattern - exists in raw format at http://www.digital-bricks.de/en/statistic4.php

Jack Sparrow With Hat 'no.1' or Minifigure, Hair Combo, Hair with Hat, Dreadlocks with Beads, Dark Red Bandana Pattern and Pirate Tricorne / Triangle

Can you propose me some program for parts decoration?
I was working with CorelDRAW many years ago when I was much younger, so I was thinking that I could try to draw those Armada officer faces and someone to stick them to a head model.

Best regards

Nemanja

[Jeff Jones]

Thank you so much for the help!
If it is not to much to ask, I would post two more similar parts, if possible to create:

Jack Sparrow W. Scarf No. 1 or Minifigure, Hair Dreadlocks with Beads and Dark Red Bandana Pattern - exists in raw format at http://www.digital-bricks.de/en/statistic4.php

Jack Sparrow With Hat 'no.1' or Minifigure, Hair Combo, Hair with Hat, Dreadlocks with Beads, Dark Red Bandana Pattern and Pirate Tricorne / Triangle

Can you propose me some program for parts decoration?
I was working with CorelDRAW many years ago when I was much younger, so I was thinking that I could try to draw those Armada officer faces and someone to stick them to a head model.

Best regards

Nemanja

the bottom of 95221 could be subparted for use in 95220

[Lisa Winter]

I'm sorry, but the part does not exist on Digital Bricks

Kind regards,

Lisa

[Belic]

I'm sorry, but the part does not exist on Digital Bricks

Kind regards,

Lisa

Hi!

I am sorry, which part does not exist?

Regards, 

[Jeff Jones]

Hi!

I am sorry, which part does not exist?

Regards, 

its 95220 that does not exist in digital-bricks

[Orion Pobursky]

An enterprising author could probably mash up the jack sparrow hair and the tricorne hat.

[Belic]

I'll just put here another hair (bald) piece used for pirates that exists in LLD and  http://www.digital-bricks.de

Minifigure, Headgear Bald Head with Tied Red Bandana Pattern - named in LLD and www.digital-bricks.de as Mini Hat No. 22

Best regards,
NB

[Lisa Winter]

I'll just put here another hair (bald) piece used for pirates that exists in LLD and  http://www.digital-bricks.de

Minifigure, Headgear Bald Head with Tied Red Bandana Pattern - named in LLD and www.digital-bricks.de as Mini Hat No. 22

Best regards,
NB

I have cleaned 25973 which is on the PT now

https://library.ldraw.org/parts/42244
https://library.ldraw.org/parts/42245
https://library.ldraw.org/parts/42246

Kind regards,

Lisa

[Belic]

I have cleaned 25973 which is on the PT now

https://library.ldraw.org/parts/42244
https://library.ldraw.org/parts/42245
https://library.ldraw.org/parts/42246

Kind regards,

Lisa

Thanks so much!

I wish I was able to contribute somehow.

[Chris Böhnke]

973px135c01 is on the PT.
https://library.ldraw.org/parts/42321

[Belic]

973px135c01 is on the PT.
https://library.ldraw.org/parts/42321

Great job! Thank you sooo much!

I was trying to draw faces for two missing Armada officers, but with not much luck. If I succeed, I will post them here.

I have also found two more missing pirate parts:

BLACK BEARD 'NO. 1' or Minifigure Beard, Braided with Hair in Back and Four Gray and Yellow Ends Pattern exists in raw format at http://www.digital-bricks.de/en/statistic4.php as 95224 BEARD FOR BLACK BEARD

SKÆG TIL DAVY JONES or Minifigure Beard, Tentacles

Thanks again!

[Jeff Jones]

2nd one has a mesh in lego fortnite but dont know if allowed in the tracker

[Orion Pobursky]

2nd one has a mesh in lego fortnite but dont know if allowed in the tracker

Not an authorized source.

[Chris Böhnke]

Great job! Thank you sooo much!

I was trying to draw faces for two missing Armada officers, but with not much luck. If I succeed, I will post them here.

I have also found two more missing pirate parts:

BLACK BEARD 'NO. 1' or Minifigure Beard, Braided with Hair in Back and Four Gray and Yellow Ends Pattern exists in raw format at http://www.digital-bricks.de/en/statistic4.php as 95224 BEARD FOR BLACK BEARD

SKÆG TIL DAVY JONES or Minifigure Beard, Tentacles

Thanks again!

Two missing faces? Do you mean this?
https://library.ldraw.org/parts/38880
https://library.ldraw.org/parts/6365

Or do you mean that anchor tattoo pirate's head from the same year (currently missing as well)?

Progress on third one so far:
   

The stubbles are bit nasty, because they cause a lot of distortion at the curved sections, but I think I'll get it done soon.

As far as I can tell the chrome breastplate for the conquistador leader is missing as well   Will probably work on that as well.

[Belic]

Two missing faces? Do you mean this?
https://library.ldraw.org/parts/38880
https://library.ldraw.org/parts/6365

Or do you mean that anchor tattoo pirate's head from the same year (currently missing as well)?

Progress on third one so far:


The stubbles are bit nasty, because they cause a lot of distortion at the curved sections, but I think I'll get it done soon.

As far as I can tell the chrome breastplate for the conquistador leader is missing as well   Will probably work on that as well.

I was thinking about the one that you have been already drawing. 

I am not sure which anchor tattoo pirate's head you are referring to. 

Indeed many decorated pirate themed parts are missing, like Conquistador, Pirate Captain, Pirate Girl, Scallywag Pirate from CMF series, or some characters from Pirates of Barracuda Bay set, and most of the Pirates of the Caribbean characters.

And great job with that conquistador face!

Chrome breastplate exists in LDD and Studio. And http://www.digital-bricks.de/en/statistic4.php as 71151 BREAST PLATE, METALLIZED

[Mark Kennedy]

Now that we got some hair for the female pirates it'd be nice if somebody could work on the  textures

Minifigure, Head Female with Eye Patch and Large Red Lips Pattern - Blocked Open Stud


Minifigure, Head Dual Sided Female with Eye Patch, Smile / Angry Mouth with Teeth Pattern - Hollow Stud

The second one is the pirate princess and the texture might be available in the Lego Ninjago videogame since it is used for the character Cyren but I don't know if using it may cause some copyright or other issues.

[Orion Pobursky]

The Lego Ninjago videogame (or any video game for that matter) is not an authorized source for any LDraw parts submitted to the library.

[Mark Kennedy]

That's kind of what I thought.

[Belic]

Now that we got some hair for the female pirates it'd be nice if somebody could work on the  textures

Minifigure, Head Female with Eye Patch and Large Red Lips Pattern - Blocked Open Stud


Minifigure, Head Dual Sided Female with Eye Patch, Smile / Angry Mouth with Teeth Pattern - Hollow Stud

The second one is the pirate princess and the texture might be available in the Lego Ninjago videogame since it is used for the character Cyren but I don't know if using it may cause some copyright or other issues.

Speaking of pirate girl parts, I found one mini wig part that belongs to DC series, but it could be useful:

MINI WIG, LONG CURLY, NO. 2 or Minifigure, Hair Female Long Wavy with Curled Bangs with White Rose and Green Leaves Pattern exists in raw format as MINI WIG, LONG CURLY, NO. 1

Happy New Year to everyone and I wish you all the best!

[Lisa Winter]

Jack Sparrow W. Scarf No. 1 or Minifigure, Hair Dreadlocks with Beads and Dark Red Bandana Pattern - exists in raw format at http://www.digital-bricks.de/en/statistic4.php

I have cleaned 95221 which is on the PT now. That was very complicated. I hope everything is correct.

https://library.ldraw.org/parts/42691

Kind regards,

Lisa

[Magnus Forsberg]

I have cleaned 95221 which is on the PT now. That was very complicated. I hope everything is correct.

I have the part.
Only the feather is white, all the beads are silver, except the two you already have as DkRed.
I think the bandana on the forehead could be expanded up and down, be a bit wider.

The main issue is the braid on the back. It is missing some details, or they are misplaced. Hard to describe at the PT. I'll try using an image here.

   

The folds in the bandana need to be rotated forward (orange arrow)
The braid should be made smooth (green) untill it meets the other part of the braid (blue) going across the braid.
(I added some orange surfaces to try to understand what's wrong.)

[Belic]

If this helps somehow:

                   

I can try to take pictures tomorrow under natural light for better sharpness.

Great job Lisa for drawing this hair piece!

I have some other minifigures and parts that I can take a photo of if someone can make them in LDraw (CMF pirates mostly, Jack Sparrow...)

[Lisa Winter]

Hello,

I used these pictures as a template. This is the best solution I found. The original part on Digital Bricks was very different. There is nothing more I can do - apart from changing the colors.

Kind regards,

Lisa