Problems with 4526

[Stephan den Ridder]

Hello!

I was wondering if someone could look into 4526. It's not quite right. There is some overlap, making it out of system.

[Rene Rechthaler]

Hm, looks like you are right:

Code:

1 16 20 0 .34 1 0 0 0 1 0 0 0 1 s\67491s01.dat
1 16 20 0 .34 1 0 0 0 1 0 0 0 -1 s\67491s01.dat
1 16 20 0 .34 -1 0 0 0 1 0 0 0 1 connhole.dat
1 16 0 0 .34 -1 0 0 0 1 0 0 0 1 connhole.dat
1 16 -20 0 .34 -1 0 0 0 1 0 0 0 1 s\67491s01.dat
1 16 -20 0 .34 -1 0 0 0 1 0 0 0 -1 s\67491s01.dat
1 16 -20 0 .34 1 0 0 0 1 0 0 0 1 connhole.dat

1 16 20 0 -39.66 1 0 0 0 1 0 0 0 1 s\39790s01.dat
1 16 20 0 -79.66 1 0 0 0 1 0 0 0 -1 s\39790s01.dat
1 16 -20 0 -79.66 -1 0 0 0 1 0 0 0 -1 s\39790s01.dat
1 16 -20 0 -39.66 -1 0 0 0 1 0 0 0 1 s\39790s01.dat

nearly everything as minimal offset...
but you can fix it (should end in 0)

[Stephan den Ridder]

Hm, looks like you are right:

Code:

1 16 20 0 .34 1 0 0 0 1 0 0 0 1 s\67491s01.dat
1 16 20 0 .34 1 0 0 0 1 0 0 0 -1 s\67491s01.dat
1 16 20 0 .34 -1 0 0 0 1 0 0 0 1 connhole.dat
1 16 0 0 .34 -1 0 0 0 1 0 0 0 1 connhole.dat
1 16 -20 0 .34 -1 0 0 0 1 0 0 0 1 s\67491s01.dat
1 16 -20 0 .34 -1 0 0 0 1 0 0 0 -1 s\67491s01.dat
1 16 -20 0 .34 1 0 0 0 1 0 0 0 1 connhole.dat

1 16 20 0 -39.66 1 0 0 0 1 0 0 0 1 s\39790s01.dat
1 16 20 0 -79.66 1 0 0 0 1 0 0 0 -1 s\39790s01.dat
1 16 -20 0 -79.66 -1 0 0 0 1 0 0 0 -1 s\39790s01.dat
1 16 -20 0 -39.66 -1 0 0 0 1 0 0 0 1 s\39790s01.dat

nearly everything as minimal offset...
but you can fix it (should end in 0)

Don't know how to fix that, unfortunately. My knowledge for this goes as far as importing it into Blender and that's it 

[Rene Rechthaler]

OK did it (just download the part, fix it and upload it back with "official file fix")

[Orion Pobursky]

Fix is on the tracker:
https://library.ldraw.org/tracker/41601