[Complete] Minifigure Parts from 71030 Looney Tunes Series

[Matthew Coleman]

Hey, I wanted to request the parts for every minifigure from 71030 Looney Tunes CMF Series. All you have in the LDraw database is the short legs for Tweety Bird and Speedy Gonzales.

https://www.bricklink.com/catalogItemInv...ItemType=S


It would be appreciated if you added the headpieces, the torsos and the other 10 Looney Tunes characters' legs to the database as well, but please feel free to take your time with it. I won't rush you. ;D

[Fredrik Hareide]

I have not seen the base meshes of those anywhere so that might be A LOT of work and require a whole lot of good reference images.

[Gerald Lasser]

I have not seen the base meshes of those anywhere so that might be A LOT of work and require a whole lot of good reference images.

Basemeshes are available, I should have them on my disk, will check

[Fredrik Hareide]

Basemeshes are available, I should have them on my disk, will check

If that's the case then I can do them after the Muppet series

[Matthew Coleman]

If that's the case then I can do them after the Muppet series

That's perfectly fine by me.

[Gerald Lasser]

I got all the heads, enclosed is the pre-cleaned package:

1. Lola Bunny -> Hair is printed
   
2. Bugs Bunny
   
3. Wile E Coyote
   
4. Road Runner
   
5. Tweety
   
6. Sylvester
   
7. Daffy Duck
   
8. Speedy Gonzales
   
9. Taz the Tasmanian Devil
   
10. Marvin the Martian
    
11. Petunia Pig -> Unfortunately only a single Mesh available
    
12. Porky Pig
    

   

[Fredrik Hareide]

Starting this project now. Please let me know if there is any particular order you want me to finish them in

[Matthew Coleman]

Starting this project now. Please let me know if there is any particular order you want me to finish them in

It actually doesn’t matter which particular order you do these minifigure parts. It’s all up to you.

[Fredrik Hareide]

Does anyone own these parts? Wondering about the necks and molding.

[Jeff Jones]

Does anyone own these parts? Wondering about the necks and molding.

i do own one, its tasmanian devil

[Magnus Forsberg]

Does anyone own these parts?

Same answer here as on the Muppets. I have them all.
I'll try to fine them and give you info.

[Fredrik Hareide]

Same answer here as on the Muppets. I have them all.
I'll try to fine them and give you info.

Thanks! If you have a chance images would be great! I think a few of the Muppets still need some updates on their neck holes too

[Magnus Forsberg]

Roadrunner
The bottom of the small hole on top of the head is white.
Only part I've seen that actually is a quadruple mould. White/light blue/blue/yellow.

       

Coyote
Depth of the brown semi cylinder is ~6ldu

           

[Magnus Forsberg]

Daffy

           

Lola
The same sloping semi cylinder as Bugs

           

[Magnus Forsberg]

Marvin

       

[Magnus Forsberg]

Sylvester
Depth of the black semi cylinder is ~6ldu
The red on the nose isn't fully covering the nose, but it could be a misprint. Think it should.

       

Taz
The inside of the ears are included in the tan mould.

       

[Magnus Forsberg]

Speedy

               

Petunia

       

[Fredrik Hareide]

Wow! Thanks a lot for the effort! This will come in superhandy as I continue the project!

[Fredrik Hareide]

Bugs Bunny and Coyote on PT!

[Fredrik Hareide]

Roadrunner
The bottom of the small hole on top of the head is white.
Only part I've seen that actually is a quadruple mould. White/light blue/blue/yellow.



Coyote
Depth of the brown semi cylinder is ~6ldu

Currently working on Roadrunner but having a hard time understanding what is actually colored what inside the neck. Is there any blue and yellow in there?

[Fredrik Hareide]

Road Runner now on PT! Please let me know if the molding separation is wrong https://library.ldraw.org/tracker/35032

[Magnus Forsberg]

Currently working on Roadrunner but having a hard time understanding what is actually colored what inside the neck. Is there any blue and yellow in there?

No blue. No yellow. Only light blue.

[Fredrik Hareide]

No blue. No yellow. Only light blue.

Thanks! Updated

[Fredrik Hareide]

Nice! I just finished Sylvester and just realized that Magnus made all the other parts for him. Looks like that guy is complete now! Thanks!

[Rene Rechthaler]

because the leg patterns (these black lines) are very similar, should they be subfiled?

[Magnus Forsberg]

Looks like that guy is complete now!

Yes, and so is Road Runner. 
Working on Wile E Coyote torso now.

[Magnus Forsberg]

   

[Fredrik Hareide]

Nice work! Looks great!

[Magnus Forsberg]

   

[Fredrik Hareide]

Nice! We're getting closer now! Looks great!

[Vincent Messenet]

Congrats, they look great!
I tawt I taw a puddy tat!

[Fredrik Hareide]

It's a wrap! All heads and headwear are made! Now Magnus just needs to finish the last torso/legs and we are done! Thanks for all the help Magnus!

[Magnus Forsberg]

It's a wrap! All heads and headwear are made! Now Magnus just needs to finish the last torso/legs and we are done! Thanks for all the help Magnus!

Only one part left now to do. Give shape to Marvin's skirt.

   

[Magnus Forsberg]

Here they are now.   Set complete.

   

[Fredrik Hareide]

That is awesome! A lot of work! Thanks for all the help!

[Fredrik Hareide]

A test render in Blender

[Travis Cobbs]

Here they are now.   Set complete.

Orion, when I open the MPD that Magnus posted in LDView, it downloads a bunch of the unofficial parts and then starts spitting out http 429 (Too many requests) errors. I'm not entirely sure what (if anything) I can do about that. What are your thoughts?

[Orion Pobursky]

Orion, when I open the MPD that Magnus posted in LDView, it downloads a bunch of the unofficial parts and then starts spitting out http 429 (Too many requests) errors. I'm not entirely sure what (if anything) I can do about that. What are your thoughts?

I throttled the download route to 60 request/min as an anti-bot measure. I can raised that up a bit if needed. But

[Travis Cobbs]

I throttled the download route to 60 request/min as an anti-bot measure. I can raised that up a bit if needed. But

I think under most circumstances, 60 requests/min is fine, and I am updating LDView to detect this error message and give the user instructions on how to proceed (wait a minute and then reload the file).

[Stephan den Ridder]

Small question: where would one find the part data in the Instructions app for the parts (i.e. 69949) when there is no digital 3D building instruction available?

[Stephan den Ridder]

Can someone help me with my question above?

[Willy Tschager]

Can someone help me with my question above?

If it's not in the BI app you might check:

http://www.digital-bricks.de/en/statistic4.php

If it's no there there is no chance.

w.