Complete 76139 Missing Parts


76139 Missing Parts
#1
Information 
I was going to do the new Batmobile for the OMR but these 2 parts are (currently) unique to that set:

56074pb01, Windscreen 12 x 12 x 2 with Black Outline Pattern
https://www.bricklink.com/v2/catalog/cat...only%22:0}
Also this windscreen has never been produced unpatterned. This is a new mold for this set.

52985, Tire 68.7 x 27 S
https://www.bricklink.com/v2/catalog/cat...D#T=C&C=11

This request is merely for documentation purposes. Since these parts are part of a high dollar set and the individual piece prices are still quite high, I don't want anyone to break the bank trying to author them. I'll backburner this project until these molds are a bit more common.
Reply
RE: 76139 Missing Parts
#2
(2019-12-07, 16:14)Orion Pobursky Wrote: I was going to do the new Batmobile for the OMR but these 2 parts are (currently) unique to that set:

56074pb01, Windscreen 12 x 12 x 2 with Black Outline Pattern
https://www.bricklink.com/v2/catalog/cat...only%22:0}
Also this windscreen has never been produced unpatterned. This is a new mold for this set.

52985, Tire 68.7 x 27 S
https://www.bricklink.com/v2/catalog/cat...D#T=C&C=11

This request is merely for documentation purposes. Since these parts are part of a high dollar set and the individual piece prices are still quite high, I don't want anyone to break the bank trying to author them. I'll backburner this project until these molds are a bit more common.
I started work on the windscreen, I might need to ask for more orthogonal pics. Best source right now is NewE.
Reply
RE: 76139 Missing Parts
#3
(2019-12-07, 16:48)Gerald Lasser Wrote: I started work on the windscreen, I might need to ask for more orthogonal pics. Best source right now is NewE.

Brothers Brick is decent:
[Image: LEGO-76139-1989-Batmobile-13-1024x683.jpg]
[Image: LEGO-76139-1989-Batmobile-14-1024x683.jpg]
Reply
RE: 76139 Missing Parts
#4
(2019-12-07, 17:01)Orion Pobursky Wrote: Brothers Brick is decent:

Here's the full article that also includes the tires:
https://www.brothers-brick.com/2019/11/0...39-review/
Reply
RE: 76139 Missing Parts
#5
But the New Elementary photo shows it from bottom, makes it easier to get the right profile.
[Image: Batmobile%2Bwindshield%2Bviews.jpg]
Reply
RE: 76139 Missing Parts
#6
Just got new pictures! 

https://doctor-brick.de/threads/76139-ba...ost-231751
Reply
RE: 76139 Missing Parts
#7
Update on the progress!

   
Reply
RE: 76139 Missing Parts
#8
(2019-12-09, 16:13)Gerald Lasser Wrote: Update on the progress!

Nice. I’m about 1/3 done with the model that’ll use this.
Reply
RE: 76139 Missing Parts
#9
(2019-12-09, 17:45)Orion Pobursky Wrote: Nice. I’m about 1/3 done with the model that’ll use this.

A looking forward to see this model!

Here's a first render, it is clean-up time now to reorganized the file....

   
Reply
RE: 76139 Missing Parts
#10
It is on the PT!

https://www.ldraw.org/cgi-bin/ptdetail.c...074p01.dat

I need to adjust some cond-lines though...

... and I could not resist:
[Image: 49204595261_8034e18433_c.jpg]SpaceColors_4 by 1wave, on Flickr
Reply
RE: 76139 Missing Parts
#11
Has someone started to work on the 52985 Tyre?
Reply
RE: 76139 Missing Parts
#12
(2020-01-15, 23:05)Greg998 Wrote: Has someone started to work on the 52985 Tyre?

I started it, it is divided into 26 sections, not nice :-)
Gerald
Reply
RE: 76139 Missing Parts
#13
(2020-01-17, 10:10)Gerald Lasser Wrote: I started it, it is divided into 26 sections, not nice :-)
Gerald
Thank you Smile
Reply
RE: 76139 Missing Parts
#14
Here's the tyre, It is also on the PT, but I am still thinking of handing the sub-files differently.

Right now I have a sub-file of one section of the tread, which is 1/26th of a circle, giving me a pretty odd measurement for the angle, resulting in vertices that are not aligned.

So I am may change to a sub-file having 1/4 of the tread inside, which makes the vertices meet. Opinions?

But for the time being the files can be used, here's a comparision with the Unimog Tyre 92912:

.png   52985_Tyre-1_4_Crop.png (Size: 204.3 KB / Downloads: 58)


Attached Files
.dat   52985.dat (Size: 1.89 KB / Downloads: 6)
.dat   52985s02.dat (Size: 7.4 KB / Downloads: 6)
.dat   52985s01.dat (Size: 3.84 KB / Downloads: 5)
Reply
RE: 76139 Missing Parts
#15
1/26 for me...
Reply
RE: 76139 Missing Parts
#16
(2020-01-21, 9:03)Gerald Lasser Wrote: Here's the tyre, It is also on the PT, but I am still thinking of handing the sub-files differently.

Right now I have a sub-file of one section of the tread, which is 1/26th of a circle, giving me a pretty odd measurement for the angle, resulting in vertices that are not aligned.

So I am may change to a sub-file having 1/4 of the tread inside, which makes the vertices meet. Opinions?

But for the time being the files can be used, here's a comparision with the Unimog Tyre 92912:

I'm in the 1/4 camp. If the odd rotation angle causes vertex problems, then the extra file size is worth inlining to align the vertices.
Reply
RE: 76139 Missing Parts
#17
(2020-01-21, 9:03)Gerald Lasser Wrote: So I am may change to a sub-file having 1/4 of the tread inside, which makes the vertices meet. Opinions?

Since 26 / 4 = 6.5, how do you propose to do that without changing the final geometry?
Reply
RE: 76139 Missing Parts
#18
(2020-01-21, 18:40)Travis Cobbs Wrote: Since 26 / 4 = 6.5, how do you propose to do that without changing the final geometry?

He's already done it. So all he would have to do is inline the s02 subfile into the s01 subfile.
Reply
RE: 76139 Missing Parts
#19
(2020-01-21, 18:51)Orion Pobursky Wrote: He's already done it. So all he would have to do is inline the s02 subfile into the s01 subfile.

...and I add in half of a tread into s01
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)