Ldcad new Shadows objects
2019-04-23, 1:08 (This post was last modified: 2019-04-23, 1:10 by Victor Di Rienzo.)
2019-04-23, 1:08 (This post was last modified: 2019-04-23, 1:10 by Victor Di Rienzo.)
This objects are:
- 57046a.dat
- 57046b.dat
- 57046c.dat
- 57046d.dat
- 57046e.dat
- 57046f.dat
Code:
0 LDCad info for "57046f.dat Technic Panel Flat Sheet 10 x 10 Quarter Ring with 4 Holes"
0 Author: Tatubias
0 !LICENSE Free for non-commercial use.
0 //Conn holes
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 160] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 180] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=160 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=180 0 0] [ori=1 0 0 0 1 0 0 0 1]
Code:
0 LDCad info for "57046d.dat Technic Panel Flat Sheet 8 x 8 Circle with 4 Holes"
0 Author: Tatubias
0 !LICENSE Free for non-commercial use.
0 //Conn holes
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-20 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-40 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-60 0 0] [ori=1 0 0 0 1 0 0 0 1]
Code:
0 LDCad info for "57046e.dat Technic Panel Flat Sheet 10 x 10 Circle with 5 Holes"
0 Author: Tatubias
0 !LICENSE Free for non-commercial use.
0 //Conn holes
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-20 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-40 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-60 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-80 0 0] [ori=1 0 0 0 1 0 0 0 1]
Code:
0 LDCad info for "57046a.dat Technic Panel Flat Sheet 8 x 17 Triangle with 10 Holes"
0 Author: Tatubias
0 !LICENSE Free for non-commercial use.
0 //Conn holes
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-20 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-40 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-60 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 80] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 100] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 120] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=200 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=220 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=240 0 0] [ori=1 0 0 0 1 0 0 0 1]
Code:
0 LDCad info for "57046b.dat Technic Panel Flat Sheet 11 x 23 Triangle with 10 Holes"
0 Author: Tatubias
0 !LICENSE Free for non-commercial use.
0 //Conn holes
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-60 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-80 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-100 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 140] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 160] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 180] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=280 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=300 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=320 0 0] [ori=1 0 0 0 1 0 0 0 1]
Code:
0 LDCad info for "57046c.dat Technic Panel Flat Sheet 15 x 33 Triangle with 10 Holes"
0 Author: Tatubias
0 !LICENSE Free for non-commercial use.
0 //Conn holes
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-100 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-120 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=-140 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 220] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 240] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=0 0 260] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=440 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=460 0 0] [ori=1 0 0 0 1 0 0 0 1]
0 !LDCAD SNAP_INCL [ref=connhole.dat] [pos=480 0 0] [ori=1 0 0 0 1 0 0 0 1]
if it should be updated let me know so we can have this new snap shadows files.