Part match up problem


Part match up problem
#1
Attached is a snippet of an official model I am working on. 

The steering arms (2739a) and the steering links (6540b) should match up with the arms at 90 degrees. I'm posting this to see if this is a problem with one of the parts or if I'm doing something wrong.


Attached Files
.ldr   problem.ldr (Size: 2.7 KB / Downloads: 12)
Reply
RE: Part match up problem
#2
(2019-03-07, 18:18)Orion Pobursky Wrote: Attached is a snippet of an official model I am working on. 

The steering arms (2739a) and the steering links (6540b) should match up with the arms at 90 degrees. I'm posting this to see if this is a problem with one of the parts or if I'm doing something wrong.
My bet is that 6540b is slighly off. (6540a is the same). Distance in z direction between towball and pinhole is 22 ldu, I guess it should be 20ldu.
Reply
RE: Part match up problem
#3
(2019-03-07, 18:47)Philippe Hurbain Wrote: My bet is that 6540b is slighly off. (6540a is the same). Distance in z direction between towball and pinhole is 22 ldu, I guess it should be 20ldu.

I don't have this part but it's pretty cheap so I can order it.
Reply
RE: Part match up problem
#4
(2019-03-07, 18:57)Orion Pobursky Wrote: I don't have this part but it's pretty cheap so I can order it.
Just checked, got it! I'll measure tomorrow !
Reply
RE: Part match up problem
#5
(2019-03-07, 20:45)Philippe Hurbain Wrote: Just checked, got it! I'll measure tomorrow !

I just ordered both versions so I can double check you.
Reply
RE: Part match up problem
#6
(2019-03-07, 18:47)Philippe Hurbain Wrote: My bet is that 6540b is slighly off. (6540a is the same). Distance in z direction between towball and pinhole is 22 ldu, I guess it should be 20ldu.

I came to the same conclusion. Something is off by 2 ldu. It could be either the pin/axle hole or the towballs.
Reply
RE: Part match up problem
#7
(2019-03-07, 22:21)Magnus Forsberg Wrote: I came to the same conclusion. Something is off by 2 ldu. It could be either the pin/axle hole or the towballs.
Clearly distance should be 20 x 70 ldu, not 22 x 70! https://photos.app.goo.gl/WEAjRxRjqAWTaJwRA
Position of towballs vs. ring are OK. I'll correct...
Reply
RE: Part match up problem
#8
(2019-03-08, 9:48)Philippe Hurbain Wrote: Clearly distance should be 20 x 70 ldu, not 22 x 70! https://photos.app.goo.gl/WEAjRxRjqAWTaJwRA
Position of towballs vs. ring are OK. I'll correct...
6540a and b now corrected on PT.
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)