Help fixing some parts i uploaded to part tracker.
2019-05-08, 15:01 (This post was last modified: 2019-05-08, 15:03 by Victor Di Rienzo.)
2019-05-08, 15:01 (This post was last modified: 2019-05-08, 15:03 by Victor Di Rienzo.)
guys i have up loaded some design to part tracker, several of them have observation. i was wondering if some one could help me with some of the comments and find a easy quick way to fix the issues.
i have several models that UR it letting me know the following:
i was recommended to use edger2
i did run it with -u+ parmeter is this the one he is mentioning? and regarding the t-juntcion what i should be doing?
when i run edger2 with the -u+ parameter the result was the same file with lines in red. what should i be fixin all this by hand? or what i should be doing. and how.
i have several models that UR it letting me know the following:
Quote:At Wed May 8 13:15:01 2019, the following review was posted:
Reviewer: UR
Certification: hold
Comments:
...also here...same problems....mismatching points...overlaps...
...T-junctions
edger2 results , unmatched edges only:
2 4 5.2 6.55488 -16.55488 5.7 5.96091 -15.96091
2 4 19.99 3.28098 -13.28098 20 0 -10
2 4 -17.52 5.38108 -15.38108 -17.69 3.30219 -13.30219
2 4 -20.01 12.6855 -22.6855 -20 14.92702 -24.92702
2 4 17.59 3.86787 -13.86787 17.66 5.46594 -15.46594
2 4 20 10.63489 -20.63489 19.99 8.358 -18.358
2 4 19.99 5.81242 -15.81242 19.99 3.28098 -13.28098
2 4 -17.69 3.86787 -13.86787 17.59 3.86787 -13.86787
2 4 -20.01 10.67731 -20.67731 -20.01 12.6855 -22.6855
2 4 3.75 3.87495 -13.87495 -17.69 3.86787 -13.86787
2 4 -17.52 10.79045 -20.79045 -17.52 5.49422 -15.49422
2 4 19.99 8.358 -18.358 19.99 5.81242 -15.81242
2 4 16.76 5.87606 -15.87606 17.64 6.24375 -16.24375
2 4 -5.19 12.44508 -22.44508 -5.21 6.67509 -16.67509
2 4 19.99 14.73611 -24.73611 20 10.63489 -20.63489
2 4 -5.21 6.67509 -16.67509 -5.23 5.28209 -15.28209
2 4 17.56 5.28209 -15.28209 17.59 3.86787 -13.86787
2 4 5.21 5.28209 -15.28209 5.2 6.55488 -16.55488
2 4 5.2 12.42387 -22.42387 5.21 13.15219 -23.15219
2 4 -5.23 13.2229 -23.2229 -5.19 12.44508 -22.44508
2 4 -20 14.92702 -24.92702 -20 20 -30
2 4 -11.53 -.00707 -9.99293 -20 0 -10
2 4 5.21 13.15219 -23.15219 5.21 5.28209 -15.28209
2 4 -5.23 5.28209 -15.28209 -5.23 13.2229 -23.2229
2 4 5.21 5.28209 -15.28209 -5.23 5.28209 -15.28209
2 4 -17.69 3.30219 -13.30219 -17.69 3.86787 -13.86787
2 4 17.66 5.46594 -15.46594 17.59 3.30219 -13.30219
2 4 -17.49 9.71565 -19.71565 -17.52 10.79045 -20.79045
2 4 17.59 3.30219 -13.30219 17.56 5.28209 -15.28209
2 4 20 0 -10 -11.53 -.00707 -9.99293
2 4 -5.23 5.28209 -15.28209 -16.37 5.27502 -15.27502
2 4 -17.52 5.49422 -15.49422 -17.49 9.71565 -19.71565
2 4 -16.37 5.27502 -15.27502 5.21 5.28209 -15.28209
2 4 -20 0 -10 -20.01 10.67731 -20.67731
2 4 17.59 3.86787 -13.86787 13.77 3.87495 -13.87495
2 4 -17.69 3.86787 -13.86787 -17.52 5.38108 -15.38108
2 4 5.2 6.55488 -16.55488 5.2 12.42387 -22.42387
2 4 13.77 3.87495 -13.87495 3.75 3.87495 -13.87495
2 4 20 20 -30 19.99 14.73611 -24.73611
i was recommended to use edger2
Quote:check by yourself with edger2 "unmatched edges only" and T-junction finder (find only)
i did run it with -u+ parmeter is this the one he is mentioning? and regarding the t-juntcion what i should be doing?
when i run edger2 with the -u+ parameter the result was the same file with lines in red. what should i be fixin all this by hand? or what i should be doing. and how.
Quote:==============================
==================================================
A novote review was posted for file parts/3039p16.dat 'Slope 45° 2 x 2 with Headlights Print' by user Philo.
See <http://www.ldraw.org//cgi-bin/ptdetail.c...039p16.dat>
================================================================================
A new version of file parts/3039p14.dat 'Slope Brick 45 2 x 2 with White "74" Pattern' was submitted by user tatubias.
See <http://www.ldraw.org//cgi-bin/ptdetail.c...039p14.dat>
================================================================================
A new version of file parts/3039p16.dat 'Slope Brick 45 2 x 2 with Headlights Pattern' was submitted by user tatubias.
See <http://www.ldraw.org//cgi-bin/ptdetail.c...039p16.dat>
================================================================================
A new version of file parts/3039p50.dat 'Slope Brick 45 2 x 2 with RoboForce Red Chevron and Yellow Eye Pattern' was submitted by user tatubias.
See <http://www.ldraw.org//cgi-bin/ptdetail.c...039p50.dat>
================================================================================
A new version of file parts/3039p50.dat 'Slope Brick 45 2 x 2 with RoboForce Red Chevron and Yellow Eye Pattern' was submitted by user tatubias.
See <http://www.ldraw.org//cgi-bin/ptdetail.c...039p50.dat>
================================================================================
A hold review was posted for file parts/3039p13.dat 'Slope Brick 45 2 x 2 with White "3" Pattern ' by user UR.
See <http://www.ldraw.org//cgi-bin/ptdetail.c...039p13.dat>
================================================================================
A hold review was posted for file parts/3039p50.dat 'Slope Brick 45 2 x 2 with RoboForce Red Chevron and Yellow Eye Pattern' by user UR.
See <http://www.ldraw.org//cgi-bin/ptdetail.c...039p50.dat>