Flag 2 x 2 with Blue and Yellow Rectangle Pattern (Sticker)

[Eugen]

I just authored draft of 2335pb024.dat part (from 3825-1 and 3833-1 sets)

• Photo of real part: https://www.bricklink.com/catalogItemIn....pb024&in=S
  
• Sticker sheet:
  • https://www.bricklink.com/catalogItemPic...=3825stk01
    
  • https://rebrickable.com/parts/56214/stic...et-3825-1/
    

Actually sticker bundled directly inside part for testing purposes (as I don't know what ID sticker has and what LDraw part name sticker part should be assigned to).

Check it, is it good enough for representing real brick.

2335pb024.dat part file:

Code:

0 Flag  2 x  2 with Blue and Yellow Rectangle Pattern (Sticker)
0 Name: 2335pb024.dat
0 Author: Eugen [Eugen]
0 !LDRAW_ORG Part UPDATE 2024-08
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt

0 !KEYWORDS K (Kilo), Set 3825, Set 3833, Ukraine

1 16 0 0 0 1 0 0 0 1 0 0 0 1 11055.dat
1 16 2 20 30 0 -1 0 0 0 -1 1 0 0 4294106a.dat

4294106a.dat sticker file:

Code:

0 Sticker  1.8 x  1.8 with Blue and Yellow Rectangle Pattern
0 Name: 4294106a.dat
0 Author: Eugen [Eugen]
0 !LDRAW_ORG Part UPDATE 2024-08
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt

0 !KEYWORDS K (Kilo), Set 3825, Set 3833, Ukraine

1 16 0 -0.25 0 18 0 0 0 0.25 0 0 0 18 box5-12.dat
4 1 18 -0.25 18 18 -0.25 0 -18 -0.25 0 -18 -0.25 18
4 14 18 -0.25 0 18 -0.25 -18 -18 -0.25 -18 -18 -0.25 0

4538725d.dat (alias) sticker file:

Code:

0 ~Sticker  1.8 x  1.8 with Blue and Yellow Rectangle Pattern
0 Name: 4538725d.dat
0 Author: Eugen [Eugen]
0 !LDRAW_ORG Part UPDATE 2024-08
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt

0 !KEYWORDS K (Kilo), Set 3825, Set 3833, Ukraine

1 16 0 0 0 1 0 0 0 1 0 0 0 1 4294106a.dat

Any suggestions on how to improve are welcome.

LeoCAD screenshot:

   

[Rene Rechthaler]

Hello, looks ok, but there are a few things:
-the part has only one sticker applied (on one side)
-the sticker itself has to be another separate file
-that sticker is numbered like the sticker sheet
-> in that case 56214 and its the first sticker of that sheet, so use index a -> 56214a.dat
-that sticker is also on another sticker sheet (64846)
-> make an alias named 64846a.dat with ~(Title) and link it to the first one
-each of them on a separate sticker assembly
(idk if CC0 is still allowed, most have CC BY 4.0)
(you dont need that 0 NOFILE, that is an Studio artefact)
(could use "K (Kilo)" as a keyword from the maritime flag alphabet)
(and maybe even "Ukraine" because of the colors)

[Orion Pobursky]

CC0 is allowed but not (yet) supported by the PT. You can submit under CC BY 4 and convert to CC0 when the PT is ready.

[Magnus Forsberg]

-that sticker is numbered like the sticker sheet
-> in that case 56214 and its the first sticker of that sheet, so use index a -> 56214a.dat

No,
"Stickers from sheets with combo 5-digit/7-digit numbers should use the 7-digit number. "

https://www.ldraw.org/part-number-spec.html#sticker

[Eugen]

I just updated the first post with corrected part and sticker files.

Done:

• removed second sticker from the 2335pb024.dat part;
  
• splitted sticker into separate 4294106a.dat, and created 4538725d.dat alias file;
  (stickers numbered with the 7-digit sheet code + subset number in letter, counted from top left corner if place stickers sheet with a LEGO manufacturing label to be at the bottom; for 4538725d.dat title name started with "~")
  
• set CC BY 4.0 license
  
• added "K (Kilo)" and "Ukraine" to keywords list
  

Check if this OK now or need more changes.

[Rene Rechthaler]

i think the sticker and its alias should use only the set they are in...
do we need a second flag+sticker shortcut with the other (alias) sticker?

[Magnus Forsberg]

I just updated the first post with corrected part and sticker files.

Done:

• removed second sticker from the 2335pb024.dat part;
  
• splitted sticker into separate 4294106a.dat, and created 4538725d.dat alias file;
  (stickers numbered  with the 7-digit sheet code + subset number in letter, counted from top left corner if place stickers sheet with a LEGO manufacturing label to be at the bottom; for 4538725d.dat title name started with "~")
  
• set CC BY 4.0 license
  
• added "K (Kilo)" and "Ukraine" to keywords list
  

Check if this OK now or need more changes.

A file must have Parttype as "Unofficial_....." to be uploaded.

https://www.ldraw.org/article/398.html

Alias parts use a different prefix character. Not ~

[Rene Rechthaler]

Sorry mixed that up...
~ is moved to
= is alias
the stickers itself need "0 !LDRAW_ORG Unofficial_Part", the assemblys "0 !LDRAW_ORG Unofficial_Shortcut"
and the Author line is normally "Full Name [Nickname]" (better ask Orion what has been registered, it will get you an error otherwise)

[Orion Pobursky]

A file must have Parttype as "Unofficial_....." to be uploaded.

The PT doesn't care. It'll change "Part" to "Unofficial_Part" automatically.

[Magnus Forsberg]

Sorry mixed that up...
~ is moved to
= is alias
the stickers itself need "0 !LDRAW_ORG Unofficial_Part", the assemblys "0 !LDRAW_ORG Unofficial_Shortcut"
and the Author line is normally "Full Name [Nickname]" (better ask Orion what has been registered, it will get you an error otherwise)

Don't give him the right answers.
He needs to read the specs, and learn to find the correct one.