Town, Trains and Boats 1991


Town, Trains and Boats 1991
#1
Updated: corrected misplaced and obsoleted parts, split movable sections into submodels


.mpd   6352 - Cargomaster Crane.mpd (Size: 12.04 KB / Downloads: 7)
   

OMR compliant
Missing items: flexible rope
Reply
6353 - Coastal Cutter
#2
Updated: Added missing sticker, corrected misplaced and obsoleted parts, split movable sections into submodels


.mpd   6353 - Coastal Cutter.mpd (Size: 13.01 KB / Downloads: 8)
   

Currently not OMR compliant (Unofficial parts not inlined)
Missing items: flexible rope, rubber band
Reply
6430 - Night Patroller
#3
Updated: Added missing pattern, corrected misplaced and obsoleted parts


.mpd   6430 - Night Patroller.mpd (Size: 11.22 KB / Downloads: 7)
   

Currently not OMR compliant (Unofficial part not inlined)
Missing items: none
Reply
6440 - Jetport Fire Squad
#4
Updated: Added missing sticker, corrected misplaced and obsoleted parts, split movable sections into submodels


.mpd   6440 - Jetport Fire Squad.mpd (Size: 11.24 KB / Downloads: 10)
   

Currently not OMR compliant (Unofficial sticker not inlined)
Missing items: flexible rope
Reply
6509 - Red Devil Racer
#5
Updated: Corrected obsoleted parts, split movable section into submodel


.mpd   6509 - Red Devil Racer.mpd (Size: 3.45 KB / Downloads: 6)
   

OMR compliant
Missing items: none
Reply
6510 - Mud Runner
#6
6510 Mud Runner (1991)


.mpd   6510 - Mud Runner.mpd (Size: 3.31 KB / Downloads: 6)
   

OMR compliant
Missing items: none
Reply
6531 - Flame Chaser
#7
Updated: Corrected obsoleted parts, split movable section into submodel


.mpd   6531 - Flame Chaser.mpd (Size: 22.18 KB / Downloads: 5)
   

OMR compliant
Missing items: none
Reply
6532 - Diesel Dumper
#8
Updated: Corrected obsoleted parts (Minifig hips & legs)


.mpd   6532 - Diesel Dumper.mpd (Size: 5.05 KB / Downloads: 5)
   

OMR compliant
Missing items: none
Reply
6540 - Pier Police
#9
Updated: Corrected substituted, misplaced and obsoleted parts, split movable sections into submodels


.mpd   6540 - Pier Police.mpd (Size: 25.39 KB / Downloads: 10)
   

Currently not OMR compliant (Unofficial items not inlined)
Missing items: Flexible rope
Reply
6541 - Intercoastal Seaport
#10
Updated: Added stickers, corrected misplaced and obsoleted parts, split movable sections into submodels


.mpd   6541 - Intercoastal Seaport.mpd (Size: 42.09 KB / Downloads: 8)
   

Currently not OMR compliant (Unofficial items not inlined)
Missing items: flexible ropes
Reply
6542 - Launch & Load Seaport
#11
Updated: Added newly created parts and stickers, corrected misplaced and obsoleted parts, split movable sections into submodels

The flagship set of Town 1991 and the first 1000+ pieces set ever in non-senior themes

Thanks again to Gerald, Magnus, Nathan, Max and all contributor involved in part 2648/2649 Crane Grab, for completing (except flexible ropes) this set!!
https://forums.ldraw.org/thread-24004.html


.mpd   6542 - Launch & Load Seaport.mpd (Size: 84.25 KB / Downloads: 7)
   

Currently not OMR compliant (Unofficial stickers not inlined)
Missing items: flexible ropes

EDIT 2022-05-15: Corrected the position of red tractor (Thanks Magnus for review!)
Reply
RE: 6542 - Launch & Load Seaport
#12
The credit should go to Max who rewrote the the main grab hook part from scratch.

btw,
the little tractor is hovering inside the yellow container.
Reply
RE: 6542 - Launch & Load Seaport
#13
(2022-05-14, 14:57)Magnus Forsberg Wrote: The credit should go to Max who rewrote the the main grab hook part from scratch.

btw,
the little tractor is hovering inside the yellow container.

Thanks for review. Corrected!!
Reply
RE: 6542 - Launch & Load Seaport
#14
Would it help if we had a repository somewhere of flexible rope components? i.e. pre-made knots, reels, etc.? I have a couple of template snippets that I (intend to) re-use, but my ropes are also a little non-compliant because I use old LSynth constraints instead of the "official" LDCad rope/string donors.
Reply
6593 - Blaze Battler
#15
6593 Blaze Battler (1991)

One of my favorite fire engine sets, along with 6358!!


.mpd   6593 - Blaze Battler.mpd (Size: 63.59 KB / Downloads: 9)
   

OMR compliant
Missing items: none (Thanks Milan for the flexible rope)
Reply
RE: 6542 - Launch & Load Seaport
#16
(2022-05-15, 1:50)N. W. Perry Wrote: Would it help if we had a repository somewhere of flexible rope components? i.e. pre-made knots, reels, etc.? I have a couple of template snippets that I (intend to) re-use, but my ropes are also a little non-compliant because I use old LSynth constraints instead of the "official" LDCad rope/string donors.

Yes, it will be very useful.
I'm now on training of LDCad flexible items template (from easier 73590 hose etc.)
Reply
6645 - Street Sweeper
#17
Updated: Added minifig, corrected misplaced and obsoleted parts, split movable sections into submodels


.mpd   6645 - Street Sweeper.mpd (Size: 15.68 KB / Downloads: 7)
   

OMR compliant
Missing items: none
Reply
6646 - Screaming Patriot
#18
6646 Screaming Patriot (1991)


.mpd   6646 - Screaming Patriot.mpd (Size: 4.63 KB / Downloads: 7)
   

OMR compliant
Missing items: none
Reply
6669 - Diesel Daredevil
#19
Updated: Corrected misplaced and obsoleted parts, split movable sections into submodels


.mpd   6669 - Diesel Daredevil.mpd (Size: 6.75 KB / Downloads: 4)
   

OMR compliant
Missing items: none
Reply
6679 - Dark Shark
#20
Updated: Added missing stickers, corrected misplaced and obsoleted parts


.mpd   6679 - Dark Shark.mpd (Size: 5.82 KB / Downloads: 5)
   

OMR compliant
Missing items: none
Reply
RE: 6645 - Street Sweeper
#21
Attached is my first attempt, at an OMR-ized LDraw model. According to MPD center, everything should be OK, but I am not sure about the file naming for b-models?`
It would be great if someone could review the file and let me know if it is ok. If so, I will make the remaining back of the box models for this set. Thanks!

6645 - Street Sweeper B-Model (1991)


.mpd   6645 - Street Sweeper - B model.mpd (Size: 7.2 KB / Downloads: 6)
   


OMR compliant

Missing items: none
Reply
1610 - Police Car
#22
1610 Police Car (1991)

One of my favorite mini-sets, having nice fitting with a police officer in minifig pack!


.mpd   1610 - Police Car.mpd (Size: 1.44 KB / Downloads: 5)
   

OMR compliant
Missing items: none
Reply
1611 - Red Race Car
#23
1611 Red Race Car (1991)


.mpd   1611 - Red Race Car.mpd (Size: 1.68 KB / Downloads: 5)
   

OMR compliant
Missing items: none
Reply
RE: 6645 - Street Sweeper
#24
(2022-05-16, 8:28)legolex76 Wrote: Attached is my first attempt, at an OMR-ized LDraw model. According to MPD center, everything should be OK, but I am not sure about the file naming for b-models?`
It would be great if someone could review the file and let me know if it is ok. If so, I will make the remaining back of the box models for this set. Thanks!

6645 - Street Sweeper B-Model (1991)





OMR compliant

Missing items: none

The build itself is very nice.
What software do you use for building?
The transformation matrices should be rounded to 0, 1 or -1 if the part is placed horizontally or vertically (at least each component cannot be >1 or <-1 by any rotation).

1 14 -10.0138 -26.2948 -0.0003 -1.000008 0 0 0 1 0 0 0 -1.000008 3020.dat
will be
1 14 -10 -26 0 -1 0 0 0 1 0 0 0 -1 3020.dat

I'm looking forward to see more alternative builds for this and other sets!!
Reply
RE: 6645 - Street Sweeper
#25
6645 - Street Sweeper - C Model (1991)


.ldr   6645 - Street Sweeper - C model.ldr (Size: 11.39 KB / Downloads: 5)
   

OMR compliant

Missing items: none
Reply
RE: 6645 - Street Sweeper
#26
(2022-05-17, 12:45)Takeshi Takahashi Wrote: The build itself is very nice.
What software do you use for building?
The transformation matrices should be rounded to 0, 1 or -1 if the part is placed horizontally or vertically (at least each component cannot be >1 or <-1 by any rotation).

1 14 -10.0138 -26.2948 -0.0003 -1.000008 0 0 0 1 0 0 0 -1.000008 3020.dat
will be
1 14 -10 -26 0 -1 0 0 0 1 0 0 0 -1 3020.dat

I'm looking forward to see more alternative builds for this and other sets!!

Thanks for the quick reply, Takeshi! 
That is interesting, I used Studio as I switched to that from MLCad a few years ago. I find it the most easy to use. Is it a problem that the values aren't rounded?

It would also be great to get a confirmation concerning the naming of the "B" models. I have started to name them alphabetically (A, B, C...), as I have noticed that seems to be how it is done on sites like backoftheboxbuilds.com , and Eurobricks. I am not sure if that is in line with the LDraw naming, though?

I posted the 6645 street sweeper model below. :-) Will these be added to the OMR model list at some point, is there something I need to do from my side?
Reply
RE: 6645 - Street Sweeper
#27
(2022-05-17, 17:26)legolex76 Wrote: It would also be great to get a confirmation mation concerning the naming of the "B" models. I have started to name them alphabetically (A, B, C...), as I have noticed that seems to be how it is done on sites like backoftheboxbuilds.com , and Eurobricks. I am not sure if that is in line with the LDraw naming, though?

I'm not sure if there's a standard one way or the other, but we typically think of A, B, C etc. as being the different models for which instructions are given, not so much the ideas on the back of the box. Though there is admittedly some gray area, like set 8448 which gives only the beginning steps for several of its alternate builds.
Reply
RE: 6645 - Street Sweeper
#28
(2022-05-17, 18:10)N. W. Perry Wrote: I'm not sure if there's a standard one way or the other, but we typically think of A, B, C etc. as being the different models for which instructions are given, not so much the ideas on the back of the box. Though there is admittedly some gray area, like set 8448 which gives only the beginning steps for several of its alternate builds.

Hi, thanks for the quick reply! 

Ok, then for now I would propose that the lettering covers the instructions first and then continues with the lid and back of the box. So if there is a second model in the instructions, it would be "B", and then I would continue with "C" for the models on lid and the back.
I hope that is ok? We can always change it later if there is an official naming pattern.
Reply
1475 - Airport Security Squad
#29
1475 Airport Security Squad (1991)


.mpd   1475 - Airport Security Squad.mpd (Size: 9.28 KB / Downloads: 7)
   

OMR compliant
Missing items: none
Reply
RE: 6645 - Street Sweeper
#30
(2022-05-18, 5:52)legolex76 Wrote: Hi, thanks for the quick reply! 

Ok, then for now I would propose that the lettering covers the instructions first and then continues with the lid and back of the box. So if there is a second model in the instructions, it would be "B", and then I would continue with "C" for the models on lid and the back.
I hope that is ok? We can always change it later if there is an official naming pattern.

As far as the name for OMR purposes, the only thing to mention is that there should be a hyphen between the set name and the sub-model, like this:
6645 - Street Sweeper - B model

MPDCenter doesn't catch this, probably because it doesn't have a database of valid set names.

As for the A, B, C pattern, I think your scheme is perfectly logical, and OMR guidelines leave the sub-model name up to the author's discretion. (It does suggest that the name be descriptive of the model, but since these are all just different street sweepers…)

So the only other question, really, is whether the OMR desires to have back-of-the-box builds included, but there's certainly no harm in posting them and this is the forum to do it!  Smile
Reply
RE: 6645 - Street Sweeper
#31
6645 - Street Sweeper - D Model (1991)


.ldr   6645 - Street Sweeper - D model.ldr (Size: 13.55 KB / Downloads: 4)
   

OMR compliant

Missing items: none
Reply
RE: 6645 - Street Sweeper
#32
(2022-05-18, 13:21)N. W. Perry Wrote: As far as the name for OMR purposes, the only thing to mention is that there should be a hyphen between the set name and the sub-model, like this:
6645 - Street Sweeper - B model

MPDCenter doesn't catch this, probably because it doesn't have a database of valid set names.

As for the A, B, C pattern, I think your scheme is perfectly logical, and OMR guidelines leave the sub-model name up to the author's discretion. (It does suggest that the name be descriptive of the model, but since these are all just different street sweepers…)

So the only other question, really, is whether the OMR desires to have back-of-the-box builds included, but there's certainly no harm in posting them and this is the forum to do it!  Smile

Thanks! I am getting the hang of the MPD Center and OMR-ization now.  Smile I uploaded the files according to the naming you suggested. There is new "D Model" below. I replaced "street sweeper" with "bulldozer" for the D model, but somehow it didn't feel right. I left the original set name for now.
Reply
1656 - Evacuation Team
#33
Updated: Corrected substituted, misplaced and obsoleted parts, split movable sections into submodels


.mpd   1656 - Evacuation Team.mpd (Size: 19.45 KB / Downloads: 4)
   

OMR compliant
Missing items: flexible rope
Reply
4536 - Blue Hopper Car
#34
Updated: Added stickers, corrected misplaced and obsoleted parts, split movable sections into submodels


.mpd   4536 - Blue Hopper Car.mpd (Size: 9 KB / Downloads: 6)
   

OMR compliant
Missing items: none
Reply
4539 - Manual Level Crossing
#35
Updated: Corrected misplaced and obsoleted parts


.mpd   4539 - Manual Level Crossing.mpd (Size: 7.54 KB / Downloads: 6)
   

OMR compliant
Missing items: none
Reply
4543 - Railroad Tractor Flatbed
#36
Updated: Corrected misplaced and obsoleted parts


.mpd   4543 - Railroad Tractor Flatbed.mpd (Size: 13.51 KB / Downloads: 6)
   

OMR compliant
Missing items: none
Reply
4546 - Road and Rail Maintenance
#37
Updated: Corrected misplaced and obsoleted parts


.mpd   4546 - Road and Rail Maintenance.mpd (Size: 5.67 KB / Downloads: 5)
   

OMR compliant
Missing items: none
Reply
4551 - Crocodile Locomotive
#38
Updated: Corrected misplaced and obsoleted parts


.mpd   4551 - Crocodile Locomotive.mpd (Size: 13.97 KB / Downloads: 5)
   

OMR compliant
Missing items: none
Reply
4554 - Metro Station
#39
Updated: Added missing stickers and accessories, corrected misplaced, substituted and obsoleted parts

One of my favorite buildings in childhood!!


.mpd   4554 - Metro Station.mpd (Size: 41.56 KB / Downloads: 9)
   

Currently not OMR compliant
Missing items: none
Reply
4558 - Metroliner
#40
Updated: Corrected substituted, misplaced, obsoleted and substandard inlined parts, split movable sections into submodels


.mpd   4558 - Metroliner.mpd (Size: 47.18 KB / Downloads: 8)
   

Currently not OMR compliant (unofficial items not inlined)
Missing items: flexible electric cable
Reply
4563 - Load and Haul Railroad
#41
Updated: Added missing stickers, corrected misplaced, substituted and obsoleted parts


.mpd   4563 - Load and Haul Railroad.mpd (Size: 31.09 KB / Downloads: 7)
   

Currently not OMR compliant (unofficial items not inlined)
Missing items: flexible electric cable
Reply
Town, Trains and Boats 1991
#42
Town, Trains and Boats sets released in 1991 (Split from 1980's and 1990's Thread)
The topics of this year are:
* IN: 9V railway system
* IN: Nautica (seaport) subtheme, introducing a number of new ship and port parts
* IN: Wide wheel 6014 and tyre 6015
Reply
RE: Town, Trains and Boats 1991
#43
4021 - Patrol Boat (1991)

.ldr   4021 - Patrol Boat.ldr (Size: 99.07 KB / Downloads: 2)
   
OMR Compliant: no, due to license issue with unofficial parts
Missing items: Stickers & rope. Unofficial parts are embedded
Made in: Studio, with LDR checked in MPD Center
Reply
RE: Town, Trains and Boats 1991
#44
4031 - Fire Rescue (1991)

.ldr   4031 - Fire Rescue.ldr (Size: 125.25 KB / Downloads: 2)
   
OMR Compliant: no, due to license issue with unofficial parts
Missing items: Stickers & rope. Unofficial parts are embedded
Made in: Studio, with LDR checked in MPD Center
Reply
RE: Town, Trains and Boats 1991
#45
As the hull for this one has been available for quite some time, I was a bit surprised to not find it in the forum or the OMR database. I hope I didn't miss it somehow.

4011 - Cabin Cruiser (1991)

.ldr   4011 - Cabin Cruiser.ldr (Size: 7.99 KB / Downloads: 1)
   
OMR compliant: yes
Missing items: Stickers & rope
Made in: Studio, with LDR checked in MPD Center
Reply
RE: Town, Trains and Boats 1991
#46
The stickers for 3 floating boat sets have been uploaded to the PT, and the town sets released in 1991 can be completed!!
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)