Minifigure Parts from 71030 Looney Tunes Series


Minifigure Parts from 71030 Looney Tunes Series
#1
Hey, I wanted to request the parts for every minifigure from 71030 Looney Tunes CMF Series. All you have in the LDraw database is the short legs for Tweety Bird and Speedy Gonzales.

https://www.bricklink.com/catalogItemInv...ItemType=S


It would be appreciated if you added the headpieces, the torsos and the other 10 Looney Tunes characters' legs to the database as well, but please feel free to take your time with it. I won't rush you. ;D
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#2
I have not seen the base meshes of those anywhere so that might be A LOT of work and require a whole lot of good reference images.
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#3
(2024-01-20, 6:25)Fredrik Hareide Wrote: I have not seen the base meshes of those anywhere so that might be A LOT of work and require a whole lot of good reference images.

Basemeshes are available, I should have them on my disk, will check
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#4
(2024-01-20, 9:57)Gerald Lasser Wrote: Basemeshes are available, I should have them on my disk, will check

If that's the case then I can do them after the Muppet series
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#5
(2024-01-20, 14:34)Fredrik Hareide Wrote: If that's the case then I can do them after the Muppet series

That's perfectly fine by me.
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#6
I got all the heads, enclosed is the pre-cleaned package:
  1. Lola Bunny -> Hair is printed
  2. Bugs Bunny
  3. Wile E Coyote
  4. Road Runner
  5. Tweety
  6. Sylvester
  7. Daffy Duck
  8. Speedy Gonzales
  9. Taz the Tasmanian Devil
  10. Marvin the Martian
  11. Petunia Pig -> Unfortunately only a single Mesh available
  12. Porky Pig
   


Attached Files
.zip   LooneyTunes.zip (Size: 627.96 KB / Downloads: 10)
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#7
Starting this project now. Please let me know if there is any particular order you want me to finish them in
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#8
(2024-02-11, 16:17)Fredrik Hareide Wrote: Starting this project now. Please let me know if there is any particular order you want me to finish them in

It actually doesn’t matter which particular order you do these minifigure parts. It’s all up to you. Wink
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#9
Does anyone own these parts? Wondering about the necks and molding.
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#10
(2024-02-15, 9:51)Fredrik Hareide Wrote: Does anyone own these parts? Wondering about the necks and molding.

i do own one, its tasmanian devil
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#11
(2024-02-15, 9:51)Fredrik Hareide Wrote: Does anyone own these parts?

Same answer here as on the Muppets. I have them all.
I'll try to fine them and give you info.
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#12
(2024-02-15, 17:01)Magnus Forsberg Wrote: Same answer here as on the Muppets. I have them all.
I'll try to fine them and give you info.

Thanks! If you have a chance images would be great! I think a few of the Muppets still need some updates on their neck holes too
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#13
Roadrunner
The bottom of the small hole on top of the head is white.
Only part I've seen that actually is a quadruple mould. White/light blue/blue/yellow.

       

Coyote
Depth of the brown semi cylinder is ~6ldu

           
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#14
Daffy

           

Lola
The same sloping semi cylinder as Bugs

           
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#15
Marvin

       


Attached Files Thumbnail(s)
               
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#16
Sylvester
Depth of the black semi cylinder is ~6ldu
The red on the nose isn't fully covering the nose, but it could be a misprint. Think it should.

       

Taz
The inside of the ears are included in the tan mould.

       
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#17
Speedy

               

Petunia

       
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#18
Wow! Thanks a lot for the effort! This will come in superhandy as I continue the project!
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#19
Bugs Bunny and Coyote on PT!
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#20
(2024-02-17, 14:53)Magnus Forsberg Wrote: Roadrunner
The bottom of the small hole on top of the head is white.
Only part I've seen that actually is a quadruple mould. White/light blue/blue/yellow.



Coyote
Depth of the brown semi cylinder is ~6ldu

Currently working on Roadrunner but having a hard time understanding what is actually colored what inside the neck. Is there any blue and yellow in there?
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#21
Road Runner now on PT! Please let me know if the molding separation is wrong https://library.ldraw.org/tracker/35032
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#22
(2024-02-19, 10:40)Fredrik Hareide Wrote: Currently working on Roadrunner but having a hard time understanding what is actually colored what inside the neck. Is there any blue and yellow in there?

No blue. No yellow. Only light blue.
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#23
(2024-02-19, 17:58)Magnus Forsberg Wrote: No blue. No yellow. Only light blue.

Thanks! Updated Smile
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#24
Nice! I just finished Sylvester and just realized that Magnus made all the other parts for him. Looks like that guy is complete now! Thanks!


Attached Files Thumbnail(s)
   
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#25
because the leg patterns (these black lines) are very similar, should they be subfiled?
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#26
(2024-02-25, 12:36)Fredrik Hareide Wrote: Looks like that guy is complete now!

Yes, and so is Road Runner. 
Working on Wile E Coyote torso now.
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#27
   
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#28
Nice work! Looks great!
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#29
   
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#30
Nice! We're getting closer now! Looks great!
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#31
Congrats, they look great!
I tawt I taw a puddy tat!
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#32
It's a wrap! All heads and headwear are made! Now Magnus just needs to finish the last torso/legs and we are done! Thanks for all the help Magnus!
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#33
(2024-03-12, 8:18)Fredrik Hareide Wrote: It's a wrap! All heads and headwear are made! Now Magnus just needs to finish the last torso/legs and we are done! Thanks for all the help Magnus!

Only one part left now to do. Give shape to Marvin's skirt.

   
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#34
Here they are now.   Set complete.

   


Attached Files
.mpd   Looney Tunes.mpd (Size: 10.26 KB / Downloads: 10)
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#35
That is awesome! A lot of work! Thanks for all the help!
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#36
A test render in Blender


Attached Files Thumbnail(s)
   
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#37
(2024-03-16, 16:32)Magnus Forsberg Wrote: Here they are now.   Set complete.

Orion, when I open the MPD that Magnus posted in LDView, it downloads a bunch of the unofficial parts and then starts spitting out http 429 (Too many requests) errors. I'm not entirely sure what (if anything) I can do about that. What are your thoughts?
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#38
(2024-03-17, 2:03)Travis Cobbs Wrote: Orion, when I open the MPD that Magnus posted in LDView, it downloads a bunch of the unofficial parts and then starts spitting out http 429 (Too many requests) errors. I'm not entirely sure what (if anything) I can do about that. What are your thoughts?

I throttled the download route to 60 request/min as an anti-bot measure. I can raised that up a bit if needed. But
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#39
(2024-03-17, 2:30)Orion Pobursky Wrote: I throttled the download route to 60 request/min as an anti-bot measure. I can raised that up a bit if needed. But

I think under most circumstances, 60 requests/min is fine, and I am updating LDView to detect this error message and give the user instructions on how to proceed (wait a minute and then reload the file).
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#40
Small question: where would one find the part data in the Instructions app for the parts (i.e. 69949) when there is no digital 3D building instruction available?
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#41
Can someone help me with my question above?
Reply
RE: Minifigure Parts from 71030 Looney Tunes Series
#42
(2024-04-28, 20:08)Stephan den Ridder Wrote: Can someone help me with my question above?

If it's not in the BI app you might check:

http://www.digital-bricks.de/en/statistic4.php

If it's no there there is no chance.

w.
LEGO ergo sum
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)