Modular Buildings

[Willy Tschager]

Topic for the Modular Buildings theme.

[Willy Tschager]

10243 - Parisian Restaurant

   


  10243 - Parisian Restaurant.mpd (Size: 907.48 KB / Downloads: 29) (OMR compliant)
Known errors: None
Done with LDCad 1.6.

[Philippe Hurbain]

Wow! Congratulations, Willy!

[Willy Tschager]

Wow! Congratulations, Willy!

Thanks, this was kind of a long term project as a few parts had to be made, mainly torsi.

w.

[Johann Eisner]

Great job.
Thumbs up.

[Philippe Hurbain]

Download MPD (OMR compliant)
Known errors: None.
Done with LDCad 1.6b
Rendered with Studio 2.0

[Willy Tschager]

Love it!

w.

[Jaco van der Molen]

Topic for the Modular Buildings theme.

10264 Corner Garage.

   

Download MPD (OMR compliant):
  10264.mpd (Size: 159.67 KB / Downloads: 23)
Known errors:

• 45 degree angle building technique not 100% accurate (but very close)
  
• Missing part:6254176 Bunny, No. 5, White (49584)
  
• Missing some printed parts
  
• Minifigs not 100% accurate due to missing printed torso's and heads. Used closest parts to compensate.
  
• Mockup used for: 6217974 Round Plate Ø32X6.4, No. 2 (Parasol)
  
• Minifig whip used for gashose not formed/shaped
  

Done with LDCad 1.6b
Rendered with LDView

[Willy Tschager]

• Missing part:6254176 Bunny, No. 5, White (49584)
  
• Missing some printed parts
  
• Minifigs not 100% accurate due to missing printed torso's and heads. Used closest parts to compensate.
  
• Mockup used for: 6217974 Round Plate Ø32X6.4, No. 2 (Parasol)
  
• Minifig whip used for gashose not formed/shaped
  

An impressive list of parts you have to author. I've been working on the parts for 10246 - Detective's Office for quite a while and have still a few torsi to do.
w.

[Jaco van der Molen]

An impressive list of parts you have to author. I've been working on the parts for 10246 - Detective's Office for quite a while and have still a few torsi to do.
w.

Most are already on the tracker: http://www.ldraw.org/cgi-bin/ptscan.cgi?q=10264
Including the dish (parasol) I mocked up

Furthermore I just realized I have used a few unofficial files too.
Will that be a problem?
If not, I can replace all missing parts that are on the tracker in my model.

[Johann Eisner]

Most are already on the tracker: http://www.ldraw.org/cgi-bin/ptscan.cgi?q=10264
Including the dish (parasol) I mocked up

Furthermore I just realized I have used a few unofficial files too.
Will that be a problem?
If not, I can replace all missing parts that are on the tracker in my model.

Hi Jaco
Import please the unofficial files to to the mpd.
File is also not OMR compliant.

Regards Johann

[Jaco van der Molen]

Hi Jaco
Import please the unofficial files to to the mpd.
File is also not OMR compliant.

Regards Johann

Ah, OK. I'll do that. Won't be soon though, I think in a week or so.

[Johann Eisner]

Ah, OK. I'll do that. Won't be soon though, I think in a week or so.

Hi Jaco
I OMRized the file for you and uploaded it to the OMR.

Johann

[Jaco van der Molen]

I just update my post on Creator Expert set 10264 Corner Garage.
It is done and posted here.

[Willy Tschager]

10246 - Detective’s Office

   


  10246 - Detective's Office.mpd (Size: 570.49 KB / Downloads: 11) (OMR compliant)
Known errors: None
Done with LDCad 1.6c
Note: This set required a few parts to be authored


  973p9j.png (Size: 1.76 KB / Downloads: 236) Minifig Torso with Jacket with Pockets over Dark Red V-Neck Sweater Pattern

  973p9i.png (Size: 1.99 KB / Downloads: 236) Minifig Torso with White Vertical Stripes and Red Bow Tie Pattern

  973p7l.png (Size: 1.85 KB / Downloads: 236) Minifig Torso with Police Female Shirt with Gold Badge, Pocket and Black Tie Pattern

  973p7i.png (Size: 1.82 KB / Downloads: 236)  Minifig Torso with Open Suit Jacket with White Shirt, Dark Red Tie and Reddish Brown

  973p1y.png (Size: 2.21 KB / Downloads: 236) Minifig Torso Female Top with  2 White Buttons and Black Straps Pattern

  3068bp76.png (Size: 1.36 KB / Downloads: 236) Tile  2 x  2 with Map Street Level with Red "X" Pattern

  3068bp77.png (Size: 1.18 KB / Downloads: 237) Tile  2 x  2 with "WANTED" Sign, Minifig Front and Side Mugshots Poster Pattern

  10172.png (Size: 2.5 KB / Downloads: 237) Minifig Trophy Cup  2.4L

  11062.png (Size: 855 bytes / Downloads: 237) Support  2 x  2 x  7 Lamppost with  4 Base Flutes (unofficial)

  13251.png (Size: 3 KB / Downloads: 236) Minifig Hair Female with Elaborate Knot Bun

  13786p02.png (Size: 2.7 KB / Downloads: 236) Animal Cat Standing Looking Forward with Dark Tan Chest and Muzzle, Dark Brown (unofficial)

  14769p0b.png (Size: 2.05 KB / Downloads: 237) Tile  2 x  2 Round with Round Underside Stud with Dart Board Pattern

  20193.png (Size: 504 bytes / Downloads: 237) Sheet Plastic  3.6 x  6.6 Rectangular with Mirror Glass Pattern (unofficial)

  57895p02.png (Size: 818 bytes / Downloads: 237) Glass for Window  1 x  4 x  6 with 'THE HIGHLANDER' and White Decorative Border

  86210p01.png (Size: 1.21 KB / Downloads: 237) Glass for Window  1 x  4 x  3 Opening with "ACE BRICKMAN PRIVATE DETECTIVE" Sign (unofficial)

  93575.png (Size: 2.7 KB / Downloads: 237) Constraction Hand Clenched with Four Fingers and Axle Hole (unofficial)

[Philippe Hurbain]

So beautiful!

This set required a few parts to be authored

Congratulations for that! I considered virtual build of this set, but gave in considering the number of patterns...


May I suggest to add steps in main models to allow easy browsing of the various floors?

And a part issue: this model requires 92280s01 and stud4g7 (in 92438), but these files are neither in PT or official parts, nor in model embedded files.

[Magnus Forsberg]

And a part issue: this model requires 92280s01 and stud4g7 (in 92438), ...

I don't understad this question. Nothing seams to be missing in my copy...

[Philippe Hurbain]

I don't understad this question. Nothing seams to be missing in my copy...

Indeed, my bad. I opened the file directly from my temp folder that contained old and weird copies of 92280 and 92438.

[Willy Tschager]

May I suggest to add steps in main models to allow easy browsing of the various floors?

Good point - updated.

w.

[Stefan Frenz]

Hi there,

I tried to build the 10218 pet shop, which still has some problems. At this point I'd like to share and ask for commenting. 

Known problems:

- Not all colors are correct.
- Windows are not all modeled the same way (some frame+glass, other complete; which is better?).
- Center part of MiniFigs are built upon torso+arms+hands instead of pre-built parts.

Edit: please use the updated version below (image didn't change too much, so not replaced).

Thank you so much for all feedback, best regards
Stefan

[Philippe Hurbain]

Very nice!

- Windows are not all modeled the same way (some frame+glass, other complete; which is better?).

Does not really matter!

- Center part of MiniFigs are built upon torso+arms+hands instead of pre-built parts.

Since LDraw library has few complete torso shortcuts, this is the expected way.

- Not all colors are correct.

Not sure to understand. All colors should be available in LDraw?




BTW, do you know you can download part inventories for Rebrickable as a LDCad part bin file (.pbg)? This way you should get the right colors... (provided Rebrickable inventories are OK, sometimes errors may happen!)

[Stefan Frenz]

Very nice!



Does not really matter!



Since LDraw library has few complete torso shortcuts, this is the expected way.



Not sure to understand. All colors should be available in LDraw?




BTW, do you know you can download part inventories for Rebrickable as a LDCad part bin file (.pbg)? This way you should get the right colors... (provided Rebrickable inventories are OK, sometimes errors may happen!)

Hi Philippe,

thank you very much for the nice words.   I will try to fix the windows so that they are at least "the same way". The colors in LDraw / LDCad are fine, but sometimes I selected the wrong one - until I recognized the existance of the Rebrickable-pbg-file-export...

Apropos Rebrickable-pbg-export: what to do if there are some parts used which in the current LDraw is marked as "moved to..." or just not existing (like in set 854 where 16-technic-brick which is provided as "x.dat" instead of "3703.dat" or "3665.dat" is provided which is "~Moved to 3665a.dat")? I'm just new to official builds, sorry if I missed the answer for this question elsewhere.

Edit: to clarify my question: is it recommended to conform to the Rebrickable database or does it not matter at all? Secondly, in the OMR-tutorial I found "replace ~Moved" by its replacement - is it therefore recommended that I check my OMR-proposals after updating LDraw for maybe-changed "~Moved" parts?

Thanks again and best regards
Stefan

[Johann Eisner]

Edit: to clarify my question: is it recommended to conform to the Rebrickable database or does it not matter at all? Secondly, in the OMR-tutorial I found "replace ~Moved" by its replacement - is it therefore recommended that I check my OMR-proposals after updating LDraw for maybe-changed "~Moved" parts?

Thanks again and best regards
Stefan

Hi Stefan
When you have finished the model, you can use MPDCenter to check the model for OMR compliance.
This program can also replace the "~moved to" parts and import maybe unofficial parts to the model,
but you can also clean up the model with LDCad's "Cleanup .." before. ---> https://forums.ldraw.org/thread-23733-po...l#pid34457

Regards
Johann

[Stefan Frenz]

Hi Stefan
When you have finished the model, you can use MPDCenter to check the model for OMR compliance.
This program can also replace the "~moved to" parts and import maybe unofficial parts to the model,
but you can also clean up the model with LDCad's "Cleanup .." before. ---> https://forums.ldraw.org/thread-23733-po...l#pid34457

Regards
Johann

Hi Johann,

thank you for your feedback. I'll use LDCad's cleanup function as suggested by Philippe. Unfortunately, MPDCenter is not working on my XUbuntu machine (tried wine, mono and wine-mono without luck). Therefore I wrote a small Java program to display the difference in used parts between (Rebrickable's) pbg and (my) mpd to clean up the Pet Shop. With your suggestion, I will add a "~Moved"-detection now   and upload the furthermore cleaned file.

Best regards
Stefan

[Johann Eisner]

Hi Johann,

thank you for your feedback. I'll use LDCad's cleanup function as suggested by Philippe. Unfortunately, MPDCenter is not working on my XUbuntu machine (tried wine, mono and wine-mono without luck). Therefore I wrote a small Java program to display the difference in used parts between (Rebrickable's) pbg and (my) mpd to clean up the Pet Shop. With your suggestion, I will add a "~Moved"-detection now   and upload the furthermore cleaned file.

Best regards
Stefan

Hi Stefan
If you clean up the file with LDCad, normally all "~ moved to" parts will be replaced.

Regards Johann

[Stefan Frenz]

Thank you Philippe and Johann for your feedback and especially your help with LDCad-options. I hope that parts/colors are correct now and that the file is OMR compliant.   There are two parts 1x1 Plate Round in Dark Bluish Gray more than listed at Rebrickable, but so far I couldn't find the ones that are wrong.

Edit: please use updated version below.

[Stefan Frenz]

There are two parts 1x1 Plate Round in Dark Bluish Gray more than listed at Rebrickable, but so far I couldn't find the ones that are wrong.

Attached is an updated version which have all parts in the correct color and correct amount.

Done with LDCad 1.6c (Linux64).
File should be OMR compliant.
Known issues: none.

[Ulrich Röder]

   
10270 - Bookshop
   

  10270 - Bookshop.mpd (Size: 124.78 KB / Downloads: 6)

OMR compliant, more or less
Known Errors:
  unofficial parts - not inserted
  without minifigs - since some parts still have to be created

List of parts - in work or still missing:

https://forums.ldraw.org/thread-23853.html

[Yu Zhang]

Is there anyone working on 10232, 10255 or 10260?