LDraw.org Discussion Forums

Full Version: Technic 1990
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
[Image: Nlm7WoN.png]

8840 - Rally Shock n' Roll Racer
OMR Compliant (NOT CHECKED YET)
Missing: Action figure Minifig tech006
Comments:
This is my first model i make this way, probably has some alignments issues. This model was my second and last technic kit that i had when i was a kid.  (btw i still don't understand how i was able to follow the building instruction, they are really hard compared new building instructions.
CAD: LDcad 1.6b As it should be Wink

[attachment=3569]
[Image: N6maY1c.png]

8840 - Rally Shock n' Roll Racer Model B
OMR Compliant (NOT CHECKED YET)
Missing: Action figure Minifig tech006
Comments: its incredible complex the building instructions, i still dont undestan how when i was kid i was able to make it Wink i did love this kit.
Hi tatubias

Sorry, but both files aren't OMR compliant.
Please read here, how to OMRize the files.  --> Official Model Repository (OMR) Specification

Regards Johann
(2019-04-28, 7:55)Johann Eisner Wrote: [ -> ]Hi tatubias

Sorry, but both files aren't OMR compliant.
Please read here, how to OMRize the files.  --> Official Model Repository (OMR) Specification

Regards Johann

i have update the file let me know if something is missing.


This file is for the main model only.

i have added the minifig
[Image: qlioB9v.jpg]

Some Render for the guys that like renders.
[Image: ZhjxPcf.jpg]

Model B With ActionFigure
im attaching the "OMR" version of the model B
(2019-04-28, 15:53)tatubias Wrote: [ -> ]i have update the file let me know if something is missing.


This file is for the main model only.

i have added the minifig

Hi
Still not quite right.
You can use MPD Center to check your files.
http://ldraw.heidemann.org/index.php?page=mpdcenter

Johann
[Image: mMjjWCm.png]
Set: 8825 - Night Chopper
OMR Compliant: Yes
Missing: Nothing
CAD: LDcad 1.6b As it should be [Image: wink.png]
Comments: none

[Image: RlTDVEf.jpg]
[Image: yJxTfQE.png]

[Image: jMCn5qn.png]

Set: 8825 - Air Plane
OMR Compliant: Yes
Missing: Nothing
CAD: LDcad 1.6b As it should be [Image: wink.png]
Comments: none
[Image: vmfVCWt.png]

Set: 8850 - Rally Support Truck - Model B
OMR Compliant: Yes
Missing: Nothing
CAD: LDcad 1.6b As it should be [Image: wink.png]
Comments: none
[Image: dmBaSHe.png]
Set: 8850 - Rally Support Truck
OMR Compliant: Yes
Missing: Nothing
CAD: LDcad 1.6b As it should be [Image: wink.png]
Comments: none
(2019-04-29, 21:02)tatubias Wrote: [ -> ]Set: 8850 - Rally Support Truck
This is one of my all time favorite sets Smile

tip: For easy piston alignment use the "scrips/technic/piston placement helper" macro.
(2019-04-29, 21:47)Roland Melkert Wrote: [ -> ]This is one of my all time favorite sets Smile

tip: For easy piston alignment use the "scrips/technic/piston placement helper" macro.
Wait what? Is this another thing LDCad does that I’ve be doing the hard way?
(2019-04-29, 21:55)Orion Pobursky Wrote: [ -> ]Wait what? Is this another thing LDCad does that I’ve be doing the hard way?

In at clase now, i.finish and test the piston alignment.

Evary day i use ldcad i learn something new, its incredibly complex software i love it..
(2019-04-29, 22:01)tatubias Wrote: [ -> ]In at clase now, i.finish and test the piston alignment.

Evary day i use ldcad i learn something new, its incredibly complex software i love it..

its impressive how good it is. congratulation. you onlyneed to click on the macro and its aligne all the pistons.

here its an example with before after.

[Image: MWdTCw2.png]
[Image: 0zCGAxe.png]
[Image: zbkQxDA.png]
(2019-04-30, 1:04)Victor Di Rienzo Wrote: [ -> ][Image: 0zCGAxe.png]
[Image: zbkQxDA.png]

Nice renders.
But I think you used the wrong color on the tyres.
Should be rubber black.
(2019-05-27, 14:23)Johann Eisner Wrote: [ -> ]Nice renders.
But I think you used the wrong color on the tyres.
Should be rubber black.

If you are using Rebrickable's pbg export note that they don't differentiate between black and rubber black (or, more generally, normal plastic colors and rubber colors). This is because Bricklink doesn't either.
(2019-05-27, 15:00)Orion Pobursky Wrote: [ -> ]If you are using Rebrickable's pbg export note that they don't differentiate between black and rubber black (or, more generally, normal plastic colors and rubber colors). This is because Bricklink doesn't either.

yes orion that the main problem, i being using rebricables pbg export, if i remember well philo let me know the issue Wink the render is for the show only i really dontcare about it. as you noticed several of my renders have minifig (krypton guys)  on the air or the models flying too.
(2019-04-29, 21:02)Victor Di Rienzo Wrote: [ -> ]Set: 8850 - Rally Support Truck
OMR Compliant: Yes
Missing: Nothing
CAD: LDcad 1.6b As it should be [Image: wink.png]
Comments: none

Sorry, but not OMR compliant.
Here the report from MPD-Center:

Check for: 8850 - Rally Support Truck.ldr
True - Mirrored parts free.
True - All files have correct License.
True - All Name entries are like filename.
True - Is MPD filename OMR conform.
False - All filenames in the MPD are OMR conform.
False - ~Moved to parts free.
False - Unresolved references free.

If some item is not True, you find below the file that causes that.

Error in: '8850 - Rally Support Truck.ldr' Unofficial file figure.ldr needs to be added.
Error in: '8850 - Rally Support Truck.ldr' Filename without setnumber does not match file description.
Error in: '8850 - Rally Support Truck.ldr' Filename not OMR conform because of the above error(s).
Error in: '8850 - Rally Support Truck Gearbox.ldr' Filename without setnumber does not match file description.
Error in: '8850 - Rally Support Truck Gearbox.ldr' Filename not OMR conform because of the above error(s).
Error in: '8850 - Rally Support Truck chasis.ldr' Filename without setnumber does not match file description.
Error in: '8850 - Rally Support Truck chasis.ldr' Filename not OMR conform because of the above error(s).
Error in: '8850 - Rally Support Truck Seat.ldr' Filename without setnumber does not match file description.
Error in: '8850 - Rally Support Truck Seat.ldr' Filename not OMR conform because of the above error(s).
Error in: '8850 - Rally Support Truck Engine.ldr' Filename without setnumber does not match file description.
Error in: '8850 - Rally Support Truck Engine.ldr' Filename not OMR conform because of the above error(s).
(2019-04-29, 21:00)Victor Di Rienzo Wrote: [ -> ]Set: 8850 - Rally Support Truck - Model B
OMR Compliant: Yes
Missing: Nothing
CAD: LDcad 1.6b As it should be [Image: wink.png]
Comments: none

The same errors here:

Check for: 8850 - Rally Support Truck - Model B.mpd
True - Mirrored parts free.
True - All files have correct License.
True - All Name entries are like filename.
True - Is MPD filename OMR conform.
False - All filenames in the MPD are OMR conform.
False - ~Moved to parts free.
False - Unresolved references free.

If some item is not True, you find below the file that causes that.

Error in: '8850 - Rally Support Truck - Model B.ldr' Unofficial file figure.ldr needs to be added.
Error in: '8850 - Rally Support Truck - Model B.ldr' Filename without setnumber does not match file description.
Error in: '8850 - Rally Support Truck - Model B.ldr' Filename not OMR conform because of the above error(s).
Error in: '8850 - Rally Support Truck - Model B Front.ldr' Filename without setnumber does not match file description.
Error in: '8850 - Rally Support Truck - Model B Front.ldr' Filename not OMR conform because of the above error(s).
Error in: '8850 - Rally Support Truck - Model B motor.ldr' Filename without setnumber does not match file description.
Error in: '8850 - Rally Support Truck - Model B motor.ldr' Filename not OMR conform because of the above error(s).
Error in: '8850 - Rally Support Truck - Model B Bumper.ldr' Filename without setnumber does not match file description.
Error in: '8850 - Rally Support Truck - Model B Bumper.ldr' Filename not OMR conform because of the above error(s).
Cleanup and OMRize all four file and add it to the OMR.
(2019-04-30, 0:29)Victor Di Rienzo Wrote: [ -> ]its impressive how good it is. congratulation. you onlyneed to click on the macro and its aligne all the pistons.

here its an example with before after.

[Image: MWdTCw2.png]

Thanks a million!
I couldn't get it to work myself (though nearly).

To help others: one thing though, for some reason I kept getting the box saying "No pistons and or cylinders to work with".
Putting the pistons and cylinders in the same .ldr did the trick (I guess ;-)
Ciao,
Eef