Hello.
I just installed LDraw_All-In-One-Installer_2024-01_setup_64Bit_v1.exe over the weekend to make a MOC of a bus based on the 80s/90s style of LEGO sets, since the only 3 I found were 696-1 (Bus Station), 379-1 (Bus Station) and MOC 90011-1 (Bus), which were not to my liking.
I used LDCad 1.6d2 to make my custom model and it worked fine. I also used LDView 4.5 to get a parts list and it also worked fine.
The problems started when I tried to run LPub3D 2.4.7.75 to create instructions for the set. On one computer, on 1st run I pointed to the LDraw library folder, but then I only get a splash screen and the program doesn't run.
On the 2nd computer, on first run I instead opted with the "Extract Archive" button but it results in the same symptom, when I run the program it only shows the splash screen for a second and doesn't start. This is what the log shows:
I'm using Windows 10 Pro x64 on both computers and I have all Visual C++libraries from 2005 to 2015-2019 installed. One computer has a Core i7 M640 and the other has a Xeon E5450, both on the older spectrum of CPUs. Are there any special requirements for the program to run?
I just installed LDraw_All-In-One-Installer_2024-01_setup_64Bit_v1.exe over the weekend to make a MOC of a bus based on the 80s/90s style of LEGO sets, since the only 3 I found were 696-1 (Bus Station), 379-1 (Bus Station) and MOC 90011-1 (Bus), which were not to my liking.
I used LDCad 1.6d2 to make my custom model and it worked fine. I also used LDView 4.5 to get a parts list and it also worked fine.
The problems started when I tried to run LPub3D 2.4.7.75 to create instructions for the set. On one computer, on 1st run I pointed to the LDraw library folder, but then I only get a splash screen and the program doesn't run.
On the 2nd computer, on first run I instead opted with the "Extract Archive" button but it results in the same symptom, when I run the program it only shows the splash screen for a second and doesn't start. This is what the log shows:
Code:
2025-02-17T09:35:02.023 INFO Initializing application LPub3D...
2025-02-17T09:35:02.024 INFO -----------------------------
2025-02-17T09:35:02.024 INFO LPub3D v2.4.7 r75 (Release) for MS Windows AMD 64bit
2025-02-17T09:35:02.025 INFO =============================
2025-02-17T09:35:02.025 INFO Arguments....................(No arguments specified)
2025-02-17T09:35:02.025 INFO LPub3D Application Data Path.(C:\Users\xxxxxxxx\AppData\Local\LPub3D Software\LPub3D)
2025-02-17T09:35:02.025 INFO LPub3D Executable Path.......(C:\Program Files\LDraw (64 Bit)\LPub3D)
2025-02-17T09:35:02.026 INFO LPub3D Log File Path.........(C:\Users\xxxxxxxx\AppData\Local\LPub3D Software\LPub3D\logs\LPub3DLog.txt)
2025-02-17T09:35:02.026 INFO LPub3D Parameters Location...(C:\Program Files\LDraw (64 Bit)\LPub3D\data\)
2025-02-17T09:35:02.026 INFO LPub3D Config File Path......(C:\Users\xxxxxxxx\AppData\Local\LPub3D Software\LPub3D)
2025-02-17T09:35:02.027 INFO LPub3D 3D Editor Cache Path..(C:\Users\xxxxxxxx\AppData\Local\LPub3D Software\LPub3D\cache)
2025-02-17T09:35:02.027 INFO LPub3D Loaded LDraw Library..(LEGO® Parts)
2025-02-17T09:35:02.027 INFO LPub3D Logging Level.........(STATUS (0), Levels: [status,info,trace,debug,notice,warning,error,fatal,off])
2025-02-17T09:35:02.028 INFO Debug Logging................(Enabled)
2025-02-17T09:35:02.028 INFO Log To Standard Output.......(Enabled)
2025-02-17T09:35:02.035 INFO Secure Socket Layer..........(Supported)
2025-02-17T09:35:02.036 INFO Application Distribution.....(Installed)
2025-02-17T09:35:02.036 INFO -----------------------------
2025-02-17T09:35:02.092 INFO 5% - Loading library for LEGO® Parts...
2025-02-17T09:35:02.448 INFO 5% - Locate LDraw archive libraries...
2025-02-17T09:35:02.456 INFO 10% - Locate LDraw directory...
2025-02-17T09:35:02.461 INFO 15% - Preferences loading...I'm using Windows 10 Pro x64 on both computers and I have all Visual C++libraries from 2005 to 2015-2019 installed. One computer has a Core i7 M640 and the other has a Xeon E5450, both on the older spectrum of CPUs. Are there any special requirements for the program to run?
