Parts we are Working on - Part Drei


RE: Parts we are Working on - Part Drei
(2023-08-01, 10:20)Gerald Lasser Wrote: Working on the new Palm Leave 3565 from Dreamzzz
Any news about this?
Reply
RE: Parts we are Working on - Part Drei
I got some unfinished Braille-Bricks, should I rework them for here? (the original author Briqui doesnt want to post them herself here)
https://www.doctor-brick.de/threads/brai...raw.16205/

Edit: do we need all Bricks in the base (unprinted) version too or is it ok if there are only the printed versions?
Reply
RE: Parts we are Working on - Part Drei
(2023-11-21, 13:16)Rene Rechthaler Wrote: do we need all Bricks in the base (unprinted) version too or is it ok if there are only the printed versions?

Since it's relatively easy to remove printing, there should always be an unprinted version even if it was never produced by LEGO.
Reply
RE: Parts we are Working on - Part Drei
(2023-11-21, 13:57)Orion Pobursky Wrote: Since it's relatively easy to remove printing, there should always be an unprinted version even if it was never produced by LEGO.

Yeah, unprinted versions always come in handy for decorating in BrickLink Part Designer!
Reply
RE: Parts we are Working on - Part Drei
I am working on the 5117-5124 Family of aircraft fusealge parts, interestingly there is parrt 5119 which exists digitally but not yet in any inventory...
Reply
RE: Parts we are Working on - Part Drei
Currently trying to gather all the Muppets and start working on the heads


Attached Files Thumbnail(s)
       
Reply
RE: Parts we are Working on - Part Drei
Kermit, Beaker, Animal and Gonzo on PT. Moving on to next
Reply
RE: Parts we are Working on - Part Drei
Going to work on 5240 ornithopter blade.
Reply
RE: Parts we are Working on - Part Drei
(2024-02-02, 8:29)Philippe Hurbain Wrote: Going to work on 5240 ornithopter blade.
Done: https://library.ldraw.org/search/part?s=ornithopter
Reply
RE: Parts we are Working on - Part Drei
Working on the Goat now since I am done with first pass on the Muppets
Reply
RE: Parts we are Working on - Part Drei
(2024-02-09, 17:57)Fredrik Hareide Wrote: Working on the Goat now since I am done with first pass on the Muppets

Great to see somebody pick up the goat :-)

I don't know why I never finished it, but here is some code to make the tummy a bit more pleasing to the eye:

Original:
3 13 5.291 -28.51 9.913 25.108 -30.263 9.891 12.036 -24.071 9.925
3 13 12.036 -24.071 9.925 25.108 -30.263 9.891 20.418 -24.649 9.917
3 13 9.297 -28.806 -9.521 14.57 -25.022 -9.535 26.029 -29.179 -9.539
3 13 21.566 -25.095 -9.526 26.029 -29.179 -9.539 14.57 -25.022 -9.535

New:
3 10 12.036 -24.071 9.925 8.2787 -25.7058 9.9282 15.988 -44.812 9.657
3 10 23.07 -27.1996 9.9048 12.036 -24.071 9.925 15.988 -44.812 9.657
3 10 16.3498 -23.9271 9.927 12.036 -24.071 9.925 23.07 -27.1996 9.9048
3 10 20.3498 -24.8895 9.9137 16.3498 -23.9271 9.927 23.07 -27.1996 9.9048
3 10 18.2519 -24.7033 -9.5279 26.029 -29.179 -9.539 15.988 -44.812 -9.657
3 10 18.2519 -24.7033 -9.5279 24.0503 -26.6486 -9.5289 26.029 -29.179 -9.539
3 10 21.566 -25.095 -9.526 24.0503 -26.6486 -9.5289 18.2519 -24.7033 -9.5279
3 10 14.57 -25.022 -9.535 18.2519 -24.7033 -9.5279 11.7023 -26.2533 -9.523
3 10 15.988 -44.812 -9.657 9.297 -28.806 -9.521 11.7023 -26.2533 -9.523
3 10 15.988 -44.812 -9.657 11.7023 -26.2533 -9.523 18.2519 -24.7033 -9.5279
3 10 8.2787 -25.7058 9.9282 5.291 -28.51 9.913 15.988 -44.812 9.657
3 10 15.988 -44.812 9.657 25.108 -30.263 9.891 23.07 -27.1996 9.9048
Reply
RE: Parts we are Working on - Part Drei
Baaaaaa! Goats on the tracker!
Reply
RE: Parts we are Working on - Part Drei
Going to give the reindeer a go now. But have not found the part number for the antlers
Reply
RE: Parts we are Working on - Part Drei
(2024-02-19, 19:25)Fredrik Hareide Wrote: But have not found the part number for the antlers

These?
https://library.ldraw.org/tracker/33940
Reply
RE: Parts we are Working on - Part Drei
(2024-02-19, 19:47)Magnus Forsberg Wrote: These?
https://library.ldraw.org/tracker/33940

No these. Finally found the number. 52084


Attached Files Thumbnail(s)
   
Reply
RE: Parts we are Working on - Part Drei
Now on PT!


Attached Files Thumbnail(s)
   
Reply
RE: Parts we are Working on - Part Drei
Finished these birds!


Attached Files Thumbnail(s)
   
Reply
RE: Parts we are Working on - Part Drei
Working on the gremlin head, getting there, but slow...

[Image: Schermafbeelding%202024-02-23%20135009.png]
Reply
RE: Parts we are Working on - Part Drei
(2024-02-23, 12:51)Evert-Jan Boer Wrote: Working on the gremlin head, getting there, but slow...

[Image: Schermafbeelding%202024-02-23%20135009.png]
Looks good! Made from scratch?
Reply
RE: Parts we are Working on - Part Drei
(2024-02-23, 16:13)Fredrik Hareide Wrote: Looks good! Made from scratch?

No, found it on digital bricks as 26052
Reply
RE: Parts we are Working on - Part Drei
As the new Speed Champions are due to arrive I did already the new bracket, but I don't have a partnumber yet.


.png   bracket.PNG (Size: 26.77 KB / Downloads: 515)
Reply
RE: Parts we are Working on - Part Drei
(2024-02-29, 13:13)Gerald Lasser Wrote: As the new Speed Champions are due to arrive I did already the new bracket, but I don't have a partnumber yet.

which set is this new bracket from?
Reply
RE: Parts we are Working on - Part Drei
(2024-02-29, 16:59)Jeff Jones Wrote: which set is this new bracket from?

It's in set 76920
Reply
RE: Parts we are Working on - Part Drei
Working on 4412/4413 orrery half spheres...
Reply
RE: Parts we are Working on - Part Drei
(2024-03-01, 8:28)Philippe Hurbain Wrote: Working on 4412/4413 orrery half spheres...
All done...
https://library.ldraw.org/search/part?s=...unofficial
Reply
RE: Parts we are Working on - Part Drei
Part 4920
   

It's on PT now:
https://library.ldraw.org/tracker/35513
Reply
RE: Parts we are Working on - Part Drei
I finally started with the rewrite of the 9V Switches.
But this will take some time.
Edit:
finished 2863,
finished 2860,
finished the metal part for 2860,
finished 2864,
next one: 2859

I stepped back to a rewrite of 2867 as this part will be the base for main geometry of the switch.
I finished 2867, but found out, that there was a fault in my measures. So I stepped back to a rewrite of 2865.
Reply
RE: Parts we are Working on - Part Drei
working on 2010 hau  Smile
Reply
RE: Parts we are Working on - Part Drei
part tracker ready?


Attached Files
.dat   87788.dat (Size: 2.89 KB / Downloads: 14)
.dat   87788s01.dat (Size: 75.36 KB / Downloads: 8)
Reply
RE: Parts we are Working on - Part Drei
Working on 4423
Reply
RE: Parts we are Working on - Part Drei
(2024-08-20, 15:57)Philippe Hurbain Wrote: Working on 4423

I downloaded the following 4 files and placed them in the correct directory, but some of them are wrong when displayed. What could be the problem?

C:\Users\...\AppData\Local\Stud.io\CustomParts

parts/4423.dat
parts/s/4423s01.dat
parts/s/57515s01.dat
parts/s/57515s02.dat


Attached Files Thumbnail(s)
   
Reply
RE: Parts we are Working on - Part Drei
(2024-08-28, 1:03)MING YING CAI Wrote: I downloaded the following 4 files and placed them in the correct directory, but some of them are wrong when displayed. What could be the problem?

C:\Users\...\AppData\Local\Stud.io\CustomParts

parts/4423.dat
parts/s/4423s01.dat
parts/s/57515s01.dat
parts/s/57515s02.dat

Studio library is NEVER up-to-date Angry , and finding missing (official) parts or primitives is a nightmare...
After extensive search, I located the missing one to be 1-16ring4 primitive, to be placed in CustomParts\p folder.
Reply
RE: Parts we are Working on - Part Drei
(2024-08-20, 15:57)Philippe Hurbain Wrote: Working on 4423

(Jens Brühl shot first Wink )
Reply
RE: Parts we are Working on - Part Drei
(2024-08-29, 12:58)Philippe Hurbain Wrote: Studio library is NEVER up-to-date Angry , and finding missing (official) parts or primitives is a nightmare...
After extensive search, I located the missing one to be 1-16ring4 primitive, to be placed in CustomParts\p folder.

Done, thank you
Reply
RE: Parts we are Working on - Part Drei
==wcuJXZ0RXYwBicvZGIn5Wa0JXYwJWdzBCZuFGIn5WaoRHIt9Gd09mYgQWd0NHIzlGIl52bkBSZiByb0BCZlVmbgM3ZulGa0pQZ0VGbw12bjBSesR3cv1GIulGa0BycpRGIlRWYtBSa


Attached Files
.dat   57579.dat (Size: 8.11 KB / Downloads: 4)
.dat   57579s01.dat (Size: 29.42 KB / Downloads: 2)
Reply
RE: Parts we are Working on - Part Drei
I'm now making 92586pb02/92586pr0002 to complete set 10222 Winter Village Post Office
https://www.bricklink.com/v2/catalog/cat...8#T=C&C=68
https://rebrickable.com/parts/92586pr000...yes-print/

I've searched images but couldn't find good front and side view images for creating print by LDPC.

Thanks in advance,
Takeshi
Reply
RE: Parts we are Working on - Part Drei
Indeed, tough to find something "good enough".
I found this one  https://i.ebayimg.com/images/g/fVoAAOSw7...l1600.webp
and perhaps this video can help:
https://youtu.be/hggajE7MQYE?si=CaOzgeqA8fXjxvCe&t=115 (but definition is not outstanding)

(2024-12-12, 15:07)Takeshi Takahashi Wrote: I've searched images but couldn't find good front and side view images for creating print by LDPC.
Another possibility is to rotate the part to match orientation of the image, project with LDPC, then rotate back the result. It will need some vertices snapping after that because of rounding errors, but it can help here!
Reply
RE: Parts we are Working on - Part Drei
(2024-12-12, 15:07)Takeshi Takahashi Wrote: I'm now making 92586pb02/92586pr0002 to complete set 10222 Winter Village Post Office
https://www.bricklink.com/v2/catalog/cat...8#T=C&C=68
https://rebrickable.com/parts/92586pr000...yes-print/

I've searched images but couldn't find good front and side view images for creating print by LDPC.

Thanks in advance,
Takeshi

maybe these would help
https://www.youtube.com/watch?v=gz4qV5_zuMo
https://www.youtube.com/watch?v=cUNwoHkHh3A
Reply
RE: Parts we are Working on - Part Drei
(2024-12-12, 15:07)Takeshi Takahashi Wrote: I'm now making 92586pb02/92586pr0002 to complete set 10222... 
I've searched images but couldn't find good front and side view images for creating print by LDPC.

Thanks in advance,
Takeshi
I got this dog, will make some pictures in the morning
Reply
RE: Parts we are Working on - Part Drei
I will start working on 42083 Bugatti Chiron Sticker sheet with these stickers (Flat and Formed):
  • #5   6228775e.dat
  • #7   6228775g.dat
  • #11   6228775k.dat
  • #14   6228775n.dat

[Image: p.jpeg]
Reply
RE: Parts we are Working on - Part Drei
(2024-12-13, 22:58)Jens Brühl Wrote: I will start working on 42083 Bugatti Chiron Sticker sheet with these stickers (Flat and Formed):
  • #5   6228775e.dat
  • #7   6228775g.dat
  • #11   6228775k.dat
  • #14   6228775n.dat

should the "Chiron" get a logo subfile/prim? (both text and bounding box separated for reusing)
its used in 4 different stickers
Reply
RE: Parts we are Working on - Part Drei
I (could) work on:

• #  5    6228775e.dat (not started yet, I would go for a TEXMAP)
• #  7    6228775g.dat (not started yet)
• # 16   6228775p.dat (~ 70% finished)
• # 17   6228775q.dat (~ 50% finished)
• # 18   6228775r.dat (nearly finished)
• # 19   6228775s.dat (nearly finished)
• # 21   6228775u.dat (nearly finished)
• # 23   6228775w.dat (nearly finished)
• # 24   6228775x.dat (nearly finished)

But I would definitely need help with the formed stickers (still struggling a bit with Slicer Pro). 

@Jens: If you have already started with some of the stickers above, please proceed. I will stop my work.
Reply
RE: Parts we are Working on - Part Drei
(2024-12-12, 23:36)Gerald Lasser Wrote: I got this dog, will make some pictures in the morning

@Philo, @Jens, @Gerald
Thank you for your great help.
I'll make the print!!
Reply
RE: Parts we are Working on - Part Drei
(2024-12-13, 22:58)Jens Brühl Wrote: I will start working on 42083 Bugatti Chiron Sticker sheet with these stickers (Flat and Formed):
  • #5   6228775e.dat
  • #7   6228775g.dat
  • #11   6228775k.dat
  • #14   6228775n.dat

Done!
https://library.ldraw.org/parts/sticker-sheets/486
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 3 Guest(s)