18926c01 Tipper Bucket 8 x 12 x 4.667 with Hinge Plate

[Orion Pobursky]

https://www.ldraw.org/cgi-bin/ptdetail.c...926c01.dat
https://www.ldraw.org/cgi-bin/ptdetail.c...926c02.dat

I'm with Willy on the dubious usefulness of these shortcuts. If we want to keep them, the origin of the shortcut should move to the hinge part of the hinge plate.

[Willy Tschager]

From my part it's really simple: delete it.

w.

[Philippe Hurbain]

From my part it's really simple: delete it.

w.

I agree...

[Magnus Forsberg]

I say it has to stay.  It's not correct without the plate.

https://img.bricklink.com/ItemImage/EXTN...iginal.png

Quote from Bricklink:
"The hinge plate is permanently attached to the underside of the tipper bed."

Design number is 19001, both with same colour plate and with grey plate.
https://brickset.com/parts/design-19001

[Philippe Hurbain]

Ah. Good point 😁

[Orion Pobursky]

I say it has to stay.  It's not correct without the plate.

https://img.bricklink.com/ItemImage/EXTN...iginal.png

Quote from Bricklink:
"The hinge plate is permanently attached to the underside of the tipper bed."

Design number is 19001, both with same colour plate and with grey plate.
https://brickset.com/parts/design-19001

I agree it should stay and be renumbered to 19001 (and 19001p01). As stated above, the origin needs to change.