Mirroring in LDPE

[Willy Tschager]

I know that for example scaling on Y for -1 mirrors this:

2 2 15.315 -9.5 8.75 25.452 -9.5 8.75
2 2 25.452 -9.5 -8.75 15.315 -9.5 -8.75
2 2 25.452 -9.5 -8.75 25.452 -9.5 8.75
2 2 32.5 -12 8.75 15.315 -12 8.75
2 2 28.5 -12 8.75 32.5 -12 8.75
2 2 28.5 -12 -8.75 15.315 -12 -8.75
2 2 15.315 -12 -8.75 32.5 -12 -8.75
1 2 28.5 -12 -8.75 -2.82843 0 2.82843 2.82843 0 2.82843 0 17.5 0 3-8cylo.dat
1 2 28.5 -12 8.75 4 0 0 0 0 4 0 -1 0 3-8disc.dat
1 2 28.5 -12 -8.75 4 0 0 0 0 4 0 1 0 3-8disc.dat
4 2 15.315 -12 8.75 28.5 -12 8.75 25.452 -9.5 8.75 15.315 -9.5 8.75
4 2 15.315 -12 -8.75 15.315 -9.5 -8.75 25.452 -9.5 -8.75 28.5 -12 -8.75
4 2 25.672 -9.172 -8.75 25.452 -9.5 -8.75 25.452 -9.5 8.75 25.672 -9.172 8.75
3 2 15.315 -9.5 -8.75 19.105 -9.5 -6.056 25.452 -9.5 -8.75
3 2 25.452 -9.5 -8.75 19.105 -9.5 -6.056 21.225 -9.5 -3.616
3 2 25.452 -9.5 -8.75 21.225 -9.5 -3.616 21.849 -9.5 -1.594
4 2 21.849 -9.5 -1.594 21.905 -9.5 0 25.452 -9.5 8.75 25.452 -9.5 -8.75
3 2 25.452 -9.5 8.75 21.905 -9.5 0 21.849 -9.5 1.594
3 2 25.452 -9.5 8.75 21.849 -9.5 1.594 21.225 -9.5 3.616
3 2 25.452 -9.5 8.75 21.225 -9.5 3.616 19.105 -9.5 6.056
3 2 25.452 -9.5 8.75 19.105 -9.5 6.056 15.315 -9.5 8.75
3 2 15.315 -12 8.75 20.4 -12 0 32.5 -12 8.75
4 2 15.315 -12 -8.75 32.5 -12 -8.75 32.5 -12 8.75 20.4 -12 0
3 2 25.672 -9.172 -8.75 28.5 -12 -8.75 25.452 -9.5 -8.75
2 2 32.5 -12 8.75 32.5 -12 -8.75
5 2 25.672 -9.172 8.75 25.672 -9.172 -8.75 24.5 -10.343 8.75 26.969 -8.304 8.75
5 2 25.672 -9.172 -8.75 25.672 -9.172 8.75 26.969 -8.304 8.75 25.452 -9.5 8.75

to

2 1 15.315 9.5 8.75 25.452 9.5 8.75
2 1 25.452 9.5 -8.75 15.315 9.5 -8.75
2 1 25.452 9.5 -8.75 25.452 9.5 8.75
2 1 32.5 12 8.75 15.315 12 8.75
2 1 28.5 12 8.75 32.5 12 8.75
2 1 28.5 12 -8.75 15.315 12 -8.75
2 1 15.315 12 -8.75 32.5 12 -8.75
1 1 28.5 12 -8.75 -2.82843 0 2.82843 -2.82843 0 -2.82843 0 17.5 0 3-8cylo.dat
1 1 28.5 12 8.75 4 0 0 0 0 -4 0 -1 0 3-8disc.dat
1 1 28.5 12 -8.75 4 0 0 0 0 -4 0 1 0 3-8disc.dat
4 1 25.452 9.5 8.75 28.5 12 8.75 15.315 12 8.75 15.315 9.5 8.75
4 1 25.452 9.5 -8.75 15.315 9.5 -8.75 15.315 12 -8.75 28.5 12 -8.75
4 1 25.452 9.5 8.75 25.452 9.5 -8.75 25.672 9.172 -8.75 25.672 9.172 8.75
3 1 19.105 9.5 -6.056 15.315 9.5 -8.75 25.452 9.5 -8.75
3 1 19.105 9.5 -6.056 25.452 9.5 -8.75 21.225 9.5 -3.616
3 1 21.225 9.5 -3.616 25.452 9.5 -8.75 21.849 9.5 -1.594
4 1 25.452 9.5 8.75 21.905 9.5 0 21.849 9.5 -1.594 25.452 9.5 -8.75
3 1 21.905 9.5 0 25.452 9.5 8.75 21.849 9.5 1.594
3 1 21.849 9.5 1.594 25.452 9.5 8.75 21.225 9.5 3.616
3 1 21.225 9.5 3.616 25.452 9.5 8.75 19.105 9.5 6.056
3 1 19.105 9.5 6.056 25.452 9.5 8.75 15.315 9.5 8.75
3 1 20.4 12 0 15.315 12 8.75 32.5 12 8.75
4 1 32.5 12 8.75 32.5 12 -8.75 15.315 12 -8.75 20.4 12 0
3 1 28.5 12 -8.75 25.672 9.172 -8.75 25.452 9.5 -8.75
2 1 32.5 12 8.75 32.5 12 -8.75
5 1 25.672 9.172 8.75 25.672 9.172 -8.75 24.5 10.343 8.75 26.969 8.304 8.75
5 1 25.672 9.172 -8.75 25.672 9.172 8.75 26.969 8.304 8.75 25.452 9.5 8.75

but how do I mirror AND compensate the -24 LDU on the y axis on the same time to get a mirror of the selection right above the parent parts?

w.

[Philippe Hurbain]

Terse answer: place the manipulator in the plane where you want mirroring to occur and use local coordinates. Tell me if you need me to switch to verbose mode

[Willy Tschager]

Terse answer: place the manipulator in the plane where you want mirroring to occur and use local coordinates. Tell me if you need me to switch to verbose mode

Local coordinates didn't work but global did. Thanks.

w.

[Philippe Hurbain]

Local coordinates didn't work but global did. Thanks.

Kind of weird, I almost always work in local mode (and it works for me...).