Hello everyone:
I made the primitive axl5hole.dat and have issues with the shape. I suggested a shape that I reproduce:
4 16 -2.2962 0 5.5434 -2.2962 1 5.5434 0 1 6 0 0 6
4 16 -2.45 0 3.6 -2.2962 0 4.5 -2.2962 0 5.5434 -4.2426 0 4.2426
4 16 -2.45 0 3.6 -4.2426 0 4.2426 -3.6 0 2.45 -2.8284 0 2.8284
4 16 -5.5434 0 2.2962 -4.5 0 2.2962 -3.6 0 2.45 -4.2426 0 4.2426
4 16 -2.2962 1 4.5 -2.2962 1 5.5434 -2.2962 0 5.5434 -2.2962 0 4.5
4 16 -2.45 1 3.6 -2.2962 1 4.5 -2.2962 0 4.5 -2.45 0 3.6
4 16 -2.45 1 3.6 -2.45 0 3.6 -2.8284 0 2.8284 -2.8284 1 2.8284
4 16 -2.8284 1 2.8284 -2.8284 0 2.8284 -3.6 0 2.45 -3.6 1 2.45
4 16 -3.6 0 2.45 -4.5 0 2.2962 -4.5 1 2.2962 -3.6 1 2.45
4 16 -4.5 1 2.2962 -4.5 0 2.2962 -5.5434 0 2.2962 -5.5434 1 2.2962
4 16 -2.2962 1 5.5434 -2.2962 1 4.5 -2.45 1 3.6 -4.2426 1 4.2426
4 16 -3.6 1 2.45 -4.2426 1 4.2426 -2.45 1 3.6 -2.8284 1 2.8284
4 16 -3.6 1 2.45 -4.5 1 2.2962 -5.5434 1 2.2962 -4.2426 1 4.2426
4 16 -6 0 0 -6 1 0 -5.5434 1 2.2962 -5.5434 0 2.2962
It's just a quarter circle. My intension is to do it as close as posible to the real shape.
Magfors give their suggestion, and there is the https://www.ldraw.org/cgi-bin/ptdetail.c...lehol8.dat, too.
These is why I open the thraed, to discuss the shape of my part and the complete axle primitives family.
I made the primitive axl5hole.dat and have issues with the shape. I suggested a shape that I reproduce:
4 16 -2.2962 0 5.5434 -2.2962 1 5.5434 0 1 6 0 0 6
4 16 -2.45 0 3.6 -2.2962 0 4.5 -2.2962 0 5.5434 -4.2426 0 4.2426
4 16 -2.45 0 3.6 -4.2426 0 4.2426 -3.6 0 2.45 -2.8284 0 2.8284
4 16 -5.5434 0 2.2962 -4.5 0 2.2962 -3.6 0 2.45 -4.2426 0 4.2426
4 16 -2.2962 1 4.5 -2.2962 1 5.5434 -2.2962 0 5.5434 -2.2962 0 4.5
4 16 -2.45 1 3.6 -2.2962 1 4.5 -2.2962 0 4.5 -2.45 0 3.6
4 16 -2.45 1 3.6 -2.45 0 3.6 -2.8284 0 2.8284 -2.8284 1 2.8284
4 16 -2.8284 1 2.8284 -2.8284 0 2.8284 -3.6 0 2.45 -3.6 1 2.45
4 16 -3.6 0 2.45 -4.5 0 2.2962 -4.5 1 2.2962 -3.6 1 2.45
4 16 -4.5 1 2.2962 -4.5 0 2.2962 -5.5434 0 2.2962 -5.5434 1 2.2962
4 16 -2.2962 1 5.5434 -2.2962 1 4.5 -2.45 1 3.6 -4.2426 1 4.2426
4 16 -3.6 1 2.45 -4.2426 1 4.2426 -2.45 1 3.6 -2.8284 1 2.8284
4 16 -3.6 1 2.45 -4.5 1 2.2962 -5.5434 1 2.2962 -4.2426 1 4.2426
4 16 -6 0 0 -6 1 0 -5.5434 1 2.2962 -5.5434 0 2.2962
It's just a quarter circle. My intension is to do it as close as posible to the real shape.
Magfors give their suggestion, and there is the https://www.ldraw.org/cgi-bin/ptdetail.c...lehol8.dat, too.
These is why I open the thraed, to discuss the shape of my part and the complete axle primitives family.