Converting 7905 leaf help with ring segments please.

[Philippe Hurbain]

Merging the 2-4ring and the two 1-8ring into two 3-8ring would be even better structure wise I think.

3-8 prims is indeed the obvious choice here...

you aren't supposed to rotate other ones

Not needed here, but you can of course do that if there is no other solution! Just keep enough precision (4 or 5 decimal points) in the transformation matrix to avoid too large mismatches.

Other considerations for this part:
- Rotate it 90° to match the orientation of similar leaves, eg. 3565
- Part is symmetrical, make 2 half subparts
- Using 2 rings on top to go from R6 to R10 is fine, but using ndis+chrd+quads avoid the introduction of needless vertices. Here is how I would do it:

Code:

1 16 0 3 0 0 0 2 0 -1 0 2 0 0 3-8ring4.dat
1 16 0 0 0 0 0 10 0 3 0 10 0 0 3-8cylo.dat
1 16 0 0 0 0 0 10 0 1 0 10 0 0 1-8chrd.dat
1 16 0 0 0 10 0 0 0 1 0 0 0 -10 1-8chrd.dat
1 16 0 0 0 10 0 0 0 1 0 0 0 10 1-8chrd.dat
1 16 0 0 0 0 0 6 0 1 0 6 0 0 2-4ndis.dat
4 16 0 0 10 0 0 6 6 0 6 7.071 0 7.071
4 16 7.071 0 7.071 6 0 6 6 0 0 10 0 0
4 16 10 0 0 6 0 0 6 0 -6 7.071 0 -7.071
4 16 6 0 -6 0 0 -6 0 0 -9.561 6.236 0 -7.628
3 16 6 0 -6 6.236 0 -7.628 7.071 0 -7.071