57792 needs a fix
2025-05-16, 11:52 (This post was last modified: 2025-05-16, 15:17 by Gerald Lasser.)
2025-05-16, 11:52 (This post was last modified: 2025-05-16, 15:17 by Gerald Lasser.)
Hi all,
57792 Cylinder 6 x 3 x 10 Half with Taper and Four Pin Holes
needs a small fix on its bottom: it collides with studs (external, flat side; not with the special notches). The problem has been noticed when trying to build set 7990-1 in Studio.
I don’t know how the real part looks exactly but there’s a picture on Rebrickable that would indicate the shape is correct (that is, there’s no notches for the studs), so the problem would be the radius of the base or the thickness of the wall there.
Anyway, thanks to anyone who would tackle that
57792 Cylinder 6 x 3 x 10 Half with Taper and Four Pin Holes
needs a small fix on its bottom: it collides with studs (external, flat side; not with the special notches). The problem has been noticed when trying to build set 7990-1 in Studio.
I don’t know how the real part looks exactly but there’s a picture on Rebrickable that would indicate the shape is correct (that is, there’s no notches for the studs), so the problem would be the radius of the base or the thickness of the wall there.
Anyway, thanks to anyone who would tackle that