(2024-01-18, 9:16)Willy Tschager Wrote: Dario,
first of all you have to get your unprinted part right. Subfiling is good but apparently the face is not symmetrical:
You have to adjust the left side to your subs. Probably the conds will be off as well. Delete them all and regenerate them at the very end.
* There is an artefact in the nose of s01
* The is an overlap in one leg with the standard studs:
1 47 0 0 0 1 0 0 0 1 0 0 0 1 stug-3x3.dat
* LDPE complains about invisible conds but that will be automatically fixed once you delete/regenerate them
* This part has way too much detail, especially at the inside. All these:
2 4 -4.39 -5.952 2.991 -4.429 -6.633 2.344
2 4 -4.429 -6.633 2.344 -4.46 -7.179 1.825
2 4 -4.46 -7.179 1.825 -4.476 -7.618 .579
2 4 -4.476 -7.618 .579 -4.511 -7.67 -.684
2 4 -4.511 -7.67 -.684 -4.537 -7.524 -2.019
2 4 -4.537 -7.524 -2.019 -4.55 -7.119 -3.234
2 4 -3.648 -9.339 4.435 -3.646 -9.475 3.143
2 4 -3.646 -9.475 3.143 -3.644 -9.775 1.844
2 4 -3.644 -9.775 1.844 -3.642 -10.017 .62
2 4 -3.642 -10.017 .62 -3.642 -10.026 -.506
2 4 -3.642 -10.026 -.506 -3.642 -9.966 -1.843
2 4 -3.642 -9.966 -1.843 -3.644 -9.738 -2.98
2 4 -3.644 -9.738 -2.98 -3.635 -10.152 -4.509
2 4 -3.614 -12.354 4.435 -3.614 -12.354 3.184
2 4 -3.614 -12.354 3.184 -3.614 -12.354 1.933
2 4 -3.614 -12.354 1.933 -3.614 -12.354 .713
2 4 -3.614 -12.354 .713 -3.614 -12.354 -.324
2 4 -3.614 -12.354 -.324 -3.614 -12.354 -1.782
2 4 -3.614 -12.354 -1.782 -3.614 -12.354 -2.841
2 4 -3.614 -12.354 -2.841 -3.614 -12.354 -4.509
2 4 .018 -18.78 5.318 .018 -18.78 4.435
2 4 .018 -18.78 4.435 .018 -18.78 3.295
2 4 .018 -18.78 3.295 .018 -18.78 2.154
2 4 .018 -18.78 2.154 .018 -18.78 .971
2 4 .018 -18.78 .971 .019 -18.778 -.332
2 4 .019 -18.778 -.332 .025 -18.77 -1.618
2 4 .025 -18.77 -1.618 .029 -18.764 -2.498
2 4 -7.057 -2.881 -4.68 -6.775 -3.798 -4.705
2 4 -6.775 -3.798 -4.705 -6.493 -4.714 -4.729
2 4 -6.493 -4.714 -4.729 -6.491 -5.62 -4.637
2 4 -6.491 -5.62 -4.637 -6.479 -6.783 -4.431
2 4 -6.479 -6.783 -4.431 -6.43 -7.935 -3.924
2 4 -6.43 -7.935 -3.924 -6.445 -8.308 -2.325
2 4 -6.445 -8.308 -2.325 -6.458 -8.503 -.591
2 4 -6.458 -8.503 -.591 -6.519 -8.45 1.172
2 4 -6.519 -8.45 1.172 -6.531 -8.09 2.76
2 4 -6.531 -8.09 2.76 -6.455 -7.22 3.542
2 4 -6.455 -7.22 3.542 -6.32 -6.002 4.222
2 4 -6.32 -6.002 4.222 -6.114 -4.575 4.553
2 4 -6.114 -4.575 4.553 -6.49 -3.793 4.028
2 4 -6.49 -3.793 4.028 -6.865 -3.01 3.502
2 4 -6.865 -3.01 3.502 -6.939 0 3.288
2 4 -7.924 -3.85 10.959 -7.95 -3.838 9.154
2 4 -7.95 -3.838 9.154 -7.931 -3.81 6.97
2 4 -7.931 -3.81 6.97 -7.823 -3.76 4.62
2 4 .029 -18.764 -2.498 .033 -18.758 -3.378
2 4 .033 -18.758 -3.378 .033 -20.574 -5.376
2 4 .033 -18.758 -3.378 .033 -24.813 -5.992
2 4 .033 -20.574 -5.376 .033 -24.813 -5.992
and many more should be deleted and the surface rebuild:
3 212 4.993 -5.251 3.517 6.296 -4.902 3.737 6.229 -6.158 3.777
3 212 6.229 -6.158 3.777 5.174 -6.262 3.352 4.993 -5.251 3.517
3 212 7.268 -7.894 4.497 6.49 -8.402 3.085 6.269 -7.14 3.493
3 212 7.268 -7.894 4.497 7.268 -9.837 3.905 6.49 -8.402 3.085
3 212 6.269 -7.14 3.493 6.49 -8.402 3.085 5.451 -7.281 2.477
3 212 5.451 -7.281 2.477 5.313 -6.818 2.969 6.269 -7.14 3.493
3 212 5.761 -4.626 -3.512 6.53 -5.513 -3.845 6.601 -4.687 -3.877
3 212 5.7 -6.106 -3.467 6.53 -5.513 -3.845 5.761 -4.626 -3.512
3 212 5.7 -6.106 -3.467 6.47 -6.639 -3.748 6.53 -5.513 -3.845
3 212 6.601 -4.687 -3.877 5.759 -2.927 -3.393 5.761 -4.626 -3.512
3 212 6.601 -4.687 -3.877 7.047 -2.972 -3.646 5.759 -2.927 -3.393
3 212 7.182 0 -3.65 5.759 -2.927 -3.393 7.047 -2.972 -3.646
3 212 5.047 0 -3.421 5.759 -2.927 -3.393 7.182 0 -3.65
3 212 5.759 -2.927 -3.393 5.047 0 -3.421 5.079 -4.515 -3.429
3 212 5.759 -2.927 -3.393 5.079 -4.515 -3.429 5.761 -4.626 -3.512
3 212 5.761 -4.626 -3.512 5.079 -4.515 -3.429 4.78 -5.176 -3.419
3 212 5.7 -6.106 -3.467 5.761 -4.626 -3.512 4.78 -5.176 -3.419
3 212 5.7 -6.106 -3.467 4.78 -5.176 -3.419 5.699 -7.235 -2.917
3 212 4.78 -5.176 -3.419 3.709 -7.123 -2.7 5.699 -7.235 -2.917
3 212 4.78 -5.176 -3.419 3.718 -5.024 -3.208 3.709 -7.123 -2.7
3 212 6.439 -8.515 1.414 5.451 -7.281 2.477 6.49 -8.402 3.085
3 212 6.439 -8.515 1.414 5.514 -7.528 1.134 5.451 -7.281 2.477
3 212 6.437 -8.469 -.339 5.514 -7.528 1.134 6.439 -8.515 1.414
3 212 6.437 -8.469 -.339 5.561 -7.619 -.229 5.514 -7.528 1.134
3 212 5.584 -7.573 -1.611 5.561 -7.619 -.229 6.437 -8.469 -.339
3 212 5.584 -7.573 -1.611 6.437 -8.469 -.339 6.453 -8.307 -1.952
3 212 7.161 -9.841 1.701 6.439 -8.515 1.414 6.49 -8.402 3.085
3 212 7.161 -9.841 1.701 6.49 -8.402 3.085 7.268 -9.837 3.905
3 212 6.439 -8.515 1.414 7.12 -9.679 -.462 6.437 -8.469 -.339
3 212 6.439 -8.515 1.414 7.161 -9.841 1.701 7.12 -9.679 -.462
3 212 6.453 -8.307 -1.952 6.437 -8.469 -.339 7.12 -9.679 -.462
3 212 6.453 -8.307 -1.952 7.12 -9.679 -.462 7.131 -9.42 -2.334
3 212 7.131 -9.42 -2.334 6.527 -7.961 -3.451 6.453 -8.307 -1.952
3 212 7.131 -9.42 -2.334 7.157 -8.948 -4.206 6.527 -7.961 -3.451
3 212 3.709 -7.123 -2.7 3.718 -5.024 -3.208 3.713 -5.329 -4.636
3 212 4.565 -5.212 -4.195 4.74 0 -4.153 3.725 0 -4.616
3 212 4.565 -5.212 -4.195 3.725 0 -4.616 3.713 -5.329 -4.636
3 212 5.514 -7.528 1.134 3.708 -7.187 2.154 5.451 -7.281 2.477
3 212 5.514 -7.528 1.134 3.705 -7.638 .906 3.708 -7.187 2.154
3 212 5.561 -7.619 -.229 3.705 -7.638 .906 5.514 -7.528 1.134
3 212 5.561 -7.619 -.229 3.705 -7.655 -.324 3.705 -7.638 .906
3 212 5.584 -7.573 -1.611 3.705 -7.655 -.324 5.561 -7.619 -.229
3 212 5.584 -7.573 -1.611 3.706 -7.577 -1.576 3.705 -7.655 -.324
3 212 5.584 -7.573 -1.611 3.709 -7.123 -2.7 3.706 -7.577 -1.576
3 212 5.584 -7.573 -1.611 5.699 -7.235 -2.917 3.709 -7.123 -2.7
3 212 5.079 -4.515 -3.429 4.74 0 -4.153 4.565 -5.212 -4.195
3 212 4.565 -5.212 -4.195 4.78 -5.176 -3.419 5.079 -4.515 -3.429
3 212 4.74 0 -4.153 5.079 -4.515 -3.429 5.047 0 -3.421
3 212 4.565 -5.212 -4.195 3.718 -5.024 -3.208 4.78 -5.176 -3.419
3 212 4.565 -5.212 -4.195 3.713 -5.329 -4.636 3.718 -5.024 -3.208
2 212 7.331 -4.873 4.217 6.296 -4.902 3.737
2 212 6.296 -4.902 3.737 4.993 -5.251 3.517
2 212 5.174 -6.262 3.352 4.993 -5.251 3.517
2 212 5.313 -6.818 2.969 5.174 -6.262 3.352
2 212 7.331 -4.873 4.217 7.294 -6.222 4.481
2 212 7.294 -6.222 4.481 7.268 -7.894 4.497
2 212 7.268 -7.894 4.497 7.268 -9.837 3.905
2 212 7.268 -9.837 3.905 6.49 -8.402 3.085
2 212 5.451 -7.281 2.477 5.313 -6.818 2.969
2 212 6.49 -8.402 3.085 5.451 -7.281 2.477
2 212 6.601 -4.687 -3.877 5.761 -4.626 -3.512
2 212 5.761 -4.626 -3.512 5.7 -6.106 -3.467
2 212 5.7 -6.106 -3.467 5.699 -7.235 -2.917
2 212 5.699 -7.235 -2.917 6.527 -7.961 -3.451
2 212 6.527 -7.961 -3.451 7.157 -8.948 -4.206
2 212 5.759 -2.927 -3.393 5.761 -4.626 -3.512
2 212 7.047 -2.972 -3.646 5.759 -2.927 -3.393
2 212 7.182 0 -3.65 5.047 0 -3.421
2 212 5.047 0 -3.421 5.079 -4.515 -3.429
2 212 5.079 -4.515 -3.429 4.78 -5.176 -3.419
5 212 4.78 -5.176 -3.419 3.709 -7.123 -2.7 5.699 -7.235 -2.917 3.718 -5.024 -3.208
2 212 3.709 -7.123 -2.7 5.699 -7.235 -2.917
2 212 3.718 -5.024 -3.208 3.709 -7.123 -2.7
2 212 4.78 -5.176 -3.419 3.718 -5.024 -3.208
2 212 5.514 -7.528 1.134 5.451 -7.281 2.477
2 212 5.561 -7.619 -.229 5.514 -7.528 1.134
2 212 5.584 -7.573 -1.611 5.561 -7.619 -.229
2 212 5.699 -7.235 -2.917 5.584 -7.573 -1.611
2 212 7.268 -9.837 3.905 7.161 -9.841 1.701
2 212 7.161 -9.841 1.701 7.12 -9.679 -.462
2 212 7.12 -9.679 -.462 7.131 -9.42 -2.334
2 212 7.131 -9.42 -2.334 7.157 -8.948 -4.206
2 212 3.708 -7.187 2.154 3.705 -7.638 .906
2 212 3.713 -5.329 -4.636 3.65 -12.354 -4.509
2 212 3.65 -12.354 -4.509 3.572 -18.758 -3.378
2 212 3.718 -5.024 -3.208 3.713 -5.329 -4.636
2 212 3.572 -18.78 4.435 3.728 -5.251 4.435
2 212 3.728 -5.251 4.435 3.708 -7.187 2.154
2 212 4.74 0 -4.153 3.725 0 -4.616
2 212 4.565 -5.212 -4.195 4.74 0 -4.153
2 212 3.713 -5.329 -4.636 4.565 -5.212 -4.195
2 212 3.708 -7.187 2.154 5.451 -7.281 2.477
2 212 3.705 -7.655 -.324 3.705 -7.638 .906
2 212 3.706 -7.577 -1.576 3.705 -7.655 -.324
2 212 3.709 -7.123 -2.7 3.706 -7.577 -1.576
2 212 4.74 0 -4.153 5.047 0 -3.421
2 212 4.565 -5.212 -4.195 4.78 -5.176 -3.419
2 212 3.572 -18.78 4.435 3.572 -18.758 -3.378
3 212 3.572 -18.78 4.435 3.728 -5.251 4.435 3.708 -7.187 2.154
3 212 3.572 -18.78 4.435 3.708 -7.187 2.154 3.705 -7.638 .906
3 212 3.572 -18.78 4.435 3.705 -7.638 .906 3.705 -7.655 -.324
3 212 3.572 -18.78 4.435 3.705 -7.655 -.324 3.572 -18.758 -3.378
3 212 3.572 -18.758 -3.378 3.705 -7.655 -.324 3.706 -7.577 -1.576
3 212 3.572 -18.758 -3.378 3.706 -7.577 -1.576 3.709 -7.123 -2.7
3 212 3.572 -18.758 -3.378 3.709 -7.123 -2.7 3.65 -12.354 -4.509
3 212 3.65 -12.354 -4.509 3.709 -7.123 -2.7 3.713 -5.329 -4.636
3 212 3.728 -5.251 4.435 4.993 -5.251 3.517 5.174 -6.262 3.352
3 212 5.451 -7.281 2.477 3.708 -7.187 2.154 5.313 -6.818 2.969
3 212 5.313 -6.818 2.969 3.708 -7.187 2.154 3.728 -5.251 4.435
3 212 3.728 -5.251 4.435 5.174 -6.262 3.352 5.313 -6.818 2.969
* Some faces have to be flipped:
3 25 5.174 -6.262 3.352 6.229 -6.158 3.777 6.269 -7.14 3.493
3 25 6.269 -7.14 3.493 5.313 -6.818 2.969 5.174 -6.262 3.352
3 25 6.296 -4.902 3.737 7.331 -4.873 4.217 7.294 -6.222 4.481
3 25 7.294 -6.222 4.481 6.229 -6.158 3.777 6.296 -4.902 3.737
3 25 6.229 -6.158 3.777 7.294 -6.222 4.481 7.268 -7.894 4.497
3 25 7.268 -7.894 4.497 6.269 -7.14 3.493 6.229 -6.158 3.777
3 25 5.7 -6.106 -3.467 5.699 -7.235 -2.917 6.527 -7.961 -3.451
3 25 6.527 -7.961 -3.451 6.47 -6.639 -3.748 5.7 -6.106 -3.467
3 25 5.584 -7.573 -1.611 6.453 -8.307 -1.952 6.527 -7.961 -3.451
3 25 6.527 -7.961 -3.451 5.699 -7.235 -2.917 5.584 -7.573 -1.611
* I'd say the tail needs an edge:
2 2 2.721 -18.999 13.001 3.866 -20.683 11.815
2 2 3.866 -20.683 11.815 4.187 -22.166 9.909
2 2 4.187 -22.166 9.909 3.381 -22.797 7.916
2 2 3.381 -22.797 7.916 2.042 -23.184 6.258
2 2 2.042 -23.184 6.258 .062 -23.27 5.76
2 2 .062 -23.27 5.76 -2.509 -23.139 6.599
2 2 -2.509 -23.139 6.599 -3.512 -22.667 8.309
2 2 -3.512 -22.667 8.309 -4.147 -22.019 10.567
2 2 -3.512 -22.667 8.309 -3.546 -20.262 12.317
2 2 -3.546 -20.262 12.317 -2.321 -18.756 13.176
2 2 -2.321 -18.756 13.176 .17 -17.847 13.51
2 2 .17 -17.847 13.51 2.721 -18.999 13.001
2 2 -4.147 -22.019 10.567 -3.546 -20.262 12.317
Come back with the result and we can talk about the pattern.
w.
Apart from the artifact on the nose, I understood very little of the things you asked me to correct... I see them as extremely complicated riddles
) I'm trying to understand. How is the visualization you posted made, is it still done in the LD Part Editor?