Parts Tracker > Patterned Part Reference, e.g. 98138


Parts Tracker > Patterned Part Reference, e.g. 98138
#1
Hello,

For whatever reason I decided to do all the missing patterns for the 1 x 1 Tile Round. Having a lot on my own and including three BL orders I have finished and uploaded thirtyseven (37) additional patterns, puh...

One small complaint on the PT, though:

The renderings of the patterned parts are extremely small and nearly impossible to distinguish. It would be great if the images for this page could be rendered a bit larger, especially for 1 x 1 and 2 x 2 parts. Torsos are better, but slightly larger would be great.

And here's the overview of all patterns the 98138 comes in (in their original color):
   
Gerald
Reply
RE: Parts Tracker > Patterned Part Reference, e.g. 98138
#2
(2017-10-06, 16:41)Gerald Lasser Wrote: Hello,

For whatever reason I decided to do all the missing patterns for the 1 x 1 Tile Round. Having a lot on my own and including three BL orders I have finished and uploaded thirtyseven (37) additional patterns, puh...

One small complaint on the PT, though:

The renderings of the patterned parts are extremely small and nearly impossible to distinguish. It would be great if the images for this page could be rendered a bit larger, especially for 1 x 1 and 2 x 2 parts. Torsos are better, but slightly larger would be great.

And here's the overview of all patterns the 98138 comes in (in their original color):

Gerald

Wow.
Jaco van der Molen
lpub.binarybricks.nl
Reply
RE: Parts Tracker > Patterned Part Reference, e.g. 98138
#3
wow. cool!
Reply
RE: Parts Tracker > Patterned Part Reference, e.g. 98138
#4
(2017-10-06, 16:41)Gerald Lasser Wrote: One small complaint on the PT, though:

The renderings of the patterned parts are extremely small and nearly impossible to distinguish. It would be great if the images for this page could be rendered a bit larger, especially for 1 x 1 and 2 x 2 parts. Torsos are better, but slightly larger would be great.

The images for patterned versions of Tile 1x1 (3070b), Tile 1 x 1 with Rounded End (24246) and Tile 1 x 1 Round (98138) as shown on the Patterned Part Summary have been rendered larger. 

I'm not sure about torsos, but if there are other parts that could do with this treatment, please let me know.
Chris (LDraw Parts Library Admin)
Reply
RE: Parts Tracker > Patterned Part Reference, e.g. 98138
#5
(2018-01-23, 22:39)Chris Dee Wrote: The images for patterned versions of Tile 1x1 (3070b), Tile 1 x 1 with Rounded End (24246) and Tile 1 x 1 Round (98138) as shown on the Patterned Part Summary have been rendered larger. 

I'm not sure about torsos, but if there are other parts that could do with this treatment, please let me know.
Thanks, Chris! That make it much easier to verify pattern availability.

I will have a look through other patterned parts over the next days and let you know my suggestions.
Reply
RE: Parts Tracker > Patterned Part Reference, e.g. 98138
#6
Nice!
Wondering... now that screens are larger and better defined, maybe thumbnail size of all parts should be increased by 50% or so?
Reply
RE: Parts Tracker > Patterned Part Reference, e.g. 98138
#7
(2018-01-23, 22:39)Chris Dee Wrote: The images for patterned versions of Tile 1x1 (3070b), Tile 1 x 1 with Rounded End (24246) and Tile 1 x 1 Round (98138) as shown on the Patterned Part Summary have been rendered larger. 

I'm not sure about torsos, but if there are other parts that could do with this treatment, please let me know.

I agree with the others that this is a nice change. On a side note, what is up with 3070bpt1, grouped into "General textual patterns" here:

http://www.ldraw.org/cgi-bin/ptpatterns.cgi?p=3070b


As for the torsos, I think it would be nice if they were twice as big as they are now (but not as big as the 1x1 parts).
Reply
RE: Parts Tracker > Patterned Part Reference, e.g. 98138
#8
(2018-01-23, 22:39)Chris Dee Wrote:
(2017-10-06, 16:41)Gerald Lasser Wrote: One small complaint on the PT, though:

The renderings of the patterned parts are extremely small and nearly impossible to distinguish. It would be great if the images for this page could be rendered a bit larger, especially for 1 x 1 and 2 x 2 parts. Torsos are better, but slightly larger would be great.

The images for patterned versions of Tile 1x1 (3070b), Tile 1 x 1 with Rounded End (24246) and Tile 1 x 1 Round (98138) as shown on the Patterned Part Summary have been rendered larger. 

I'm not sure about torsos, but if there are other parts that could do with this treatment, please let me know.

Currently the new size is about 400%

I would also increase the size of the Minifig parts by 200%, i.e.:
- Head (3626)
- Torso (973)
- Hips  (3815)
- Legs 3816, 3817
- Arms 

I did a pivot-table of the (official) patterned parts and came to this conclusion:

apart from the above there are:
- 3068b (105x) -> 200%
- 3069b (83x) -> 200%
- 3005 (80) -> 200%
- 3070b (77x) already increased
- 98138 (74x) already increased
- 3039 (51x), Slope 45, 2x2 -> 200%
- 4162 (44x), Tile 1x8, readability is bad, but difficult to increase to 200%
- 92241. 92243 (43x) Friends Torso, 200%
- 3010, those look ok
- 3004, look ok, but wouldn't matter at 200%
- 4150, 14769 (Tile 2x2) 200%
- 92198, Friends Head 300%
- 92249, 92250, 92251, 92252, 92253, 11202, 11244, 20380 Friedns Hips and Legs 200%
- 92244 92245, 92246, 92247 Friends Arms 200%
- 3040 (9x) 20%
- 3024, Plate 1x1, 400%
-747 200% although there won't be any more coming
- 30367b 200%
- 30375 Mech Torso
- 30361d

Those are the ones used most
Reply
RE: Parts Tracker > Patterned Part Reference, e.g. 98138
#9
(2018-01-26, 15:16)Gerald Lasser Wrote: Currently the new size is about 400%

I would also increase the size of the Minifig parts by 200%, i.e.:
- Head (3626)
- Torso (973)
- Hips  (3815)
- Legs 3816, 3817
- Arms 

I did a pivot-table of the (official) patterned parts and came to this conclusion:

apart from the above there are:
- 3068b (105x) -> 200%
- 3069b (83x) -> 200%
- 3005 (80) -> 200%
- 3070b (77x) already increased
- 98138 (74x) already increased
- 3039 (51x), Slope 45, 2x2 -> 200%
- 4162 (44x), Tile 1x8, readability is bad, but difficult to increase to 200%
- 92241. 92243 (43x) Friends Torso, 200%
- 3010, those look ok
- 3004, look ok, but wouldn't matter at 200%
- 4150, 14769 (Tile 2x2) 200%
- 92198, Friends Head 300%
- 92249, 92250, 92251, 92252, 92253, 11202, 11244, 20380 Friedns Hips and Legs 200%
- 92244 92245, 92246, 92247 Friends Arms 200%
- 3040 (9x) 20%
- 3024, Plate 1x1, 400%
-747 200% although there won't be any more coming
- 30367b 200%
- 30375 Mech Torso
- 30361d

Those are the ones used most

This has (mostly) been implemented and affects the size of the images on the part detail pages and the patterned parts summaries. The unofficial images have been refreshed and the official image refresh has been started (but will take a while).
Chris (LDraw Parts Library Admin)
Reply
« Next Oldest | Next Newest »



Forum Jump:


Users browsing this thread: 1 Guest(s)