Request 7033 and 80441

[Orion Pobursky]

I'd like to have:
7033 Brick Round Corner 5 x 5 x 1 with Bottom Cut Outs [No Studs] [1/4 Arch]
https://rebrickable.com/parts/7033/brick...s-14-arch/
Similar to 24599

80441 Wheel Wheelchair with Fixed Hard Rubber Tire, with Pin Hole
2 Color variants:
Tan Rubber: https://rebrickable.com/parts/80441c02/w...-pin-hole/
Black Rubber: https://rebrickable.com/parts/80441c01/w...-pin-hole/

There's also a couple of patterns that would be nice to haves, both Round 2x2 Tiles:
https://rebrickable.com/parts/14769pr996...oin-print/
https://rebrickable.com/parts/14769pr997...und-print/

[Gerald Lasser]

Did the bamboo tile

That was really a great application for the LDPC-Fill feature and how to properly use it, very satisfying :-)

[Chris Böhnke]

Does anyone know if 80441 is identical to 24314, except for the pin hole?
Also, does it still have the 15 degree (?) offset for the spokes on the backside?

I've made a quick version based on 24314p01.dat:
   

EDIT:
I'm also a bit confused regarding the actual file name - a colour 16/16 version of this is not supposed to exist, due to the rubber rim?
So there would only be 80441p01 (black rim) and 80441p02 (tan rim)?

EDIT 2:
Would be nice if someone could check the spoke thickness as well - looked it up in the BI app and they seem thicker?

[Gerald Lasser]

Does anyone know if 80441 is identical to 24314, except for the pin hole?
Also, does it still have the 15 degree (?) offset for the spokes on the backside?

I've made a quick version based on 24314p01.dat:


EDIT:
I'm also a bit confused regarding the actual file name - a colour 16/16 version of this is not supposed to exist, due to the rubber rim?
So there would only be 80441p01 (black rim) and 80441p02 (tan rim)?

EDIT 2:
Would be nice if someone could check the spoke thickness as well - looked it up in the BI app and they seem thicker?

These are the files from the BI

[Magnus Forsberg]

EDIT:
I'm also a bit confused regarding the actual file name - a colour 16/16 version of this is not supposed to exist, due to the rubber rim?
So there would only be 80441p01 (black rim) and 80441p02 (tan rim)?

There must be a uncoloured version of this. It's a dual mould and should be made from 2 subfiles. Not a tyre + rim shortcut.

The colour should be on the Tyre.
p01 = Rubber_Black tyre
p02 = Rubber_Tan tyre

[Chris Böhnke]

Thanks for the help, 80441 is on the PT

[Gerald Lasser]

Second tile is also done